[PATCH v3 1/2] ARM: shmobile: r8a7790: add internal PCI bridge nodes
Sergei Shtylyov
sergei.shtylyov at cogentembedded.com
Tue May 20 13:12:30 PDT 2014
From: Ben Dooks <ben.dooks at codethink.co.uk>
Add device nodes for the R8A7790 internal PCI bridge devices.
Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton at codethink.co.uk>
[Sergei: added interrupt-related properties to the PCI bridge nodes]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
---
Changes in version 3:
- added interrupt-related properties to the PCI bridge nodes;
- refreshed the patch.
Changes in version 2:
- reworded summary (fixing typo) and changelog;
- removed extra spaces before {;
- refreshed the patch.
arch/arm/boot/dts/r8a7790.dtsi | 54 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7790.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7790.dtsi
+++ renesas/arch/arm/boot/dts/r8a7790.dtsi
@@ -876,4 +876,58 @@
#size-cells = <0>;
status = "disabled";
};
+
+ pci0: pci at ee090000 {
+ compatible = "renesas,pci-r8a7790";
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ reg = <0x0 0xee090000 0x0 0xc00>,
+ <0x0 0xee080000 0x0 0x1100>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci1: pci at ee0b0000 {
+ compatible = "renesas,pci-r8a7790";
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ reg = <0x0 0xee0b0000 0x0 0xc00>,
+ <0x0 0xee0a0000 0x0 0x1100>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <1 1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci2: pci at ee0d0000 {
+ compatible = "renesas,pci-r8a7790";
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ reg = <0x0 0xee0d0000 0x0 0xc00>,
+ <0x0 0xee0c0000 0x0 0x1100>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <2 2>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
More information about the linux-arm-kernel
mailing list