[PATCH 18/20] ARM: imx5: remove file mm-imx5.c

[Shawn Guo]

The only code left in mm-imx5.c is to create static mapping.  While all
IMX platform code are moved to use dynamic mapping, the file can just be
removed now.

Signed-off-by: Shawn Guo <shawn.guo at freescale.com>
---
 arch/arm/mach-imx/Makefile     |  2 +-
 arch/arm/mach-imx/common.h     |  2 --
 arch/arm/mach-imx/mach-imx50.c |  1 -
 arch/arm/mach-imx/mach-imx51.c |  1 -
 arch/arm/mach-imx/mach-imx53.c |  1 -
 arch/arm/mach-imx/mm-imx5.c    | 61 ------------------------------------------
 6 files changed, 1 insertion(+), 67 deletions(-)
 delete mode 100644 arch/arm/mach-imx/mm-imx5.c

diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 5396b38..2c8ca00 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
 imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o $(imx5-pm-y)
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o $(imx5-pm-y)
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o clk.o \
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index b480f0b..53ee569 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -26,8 +26,6 @@ void mx25_map_io(void);
 void mx27_map_io(void);
 void mx31_map_io(void);
 void mx35_map_io(void);
-void mx51_map_io(void);
-void mx53_map_io(void);
 void imx1_init_early(void);
 void imx21_init_early(void);
 void imx25_init_early(void);
diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c
index 66e537b..62a4d45 100644
--- a/arch/arm/mach-imx/mach-imx50.c
+++ b/arch/arm/mach-imx/mach-imx50.c
@@ -29,7 +29,6 @@ static const char *imx50_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
-	.map_io		= mx53_map_io,
 	.init_irq	= tzic_init_irq,
 	.init_machine	= imx50_dt_init,
 	.dt_compat	= imx50_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c
index a2027d2..92806ad 100644
--- a/arch/arm/mach-imx/mach-imx51.c
+++ b/arch/arm/mach-imx/mach-imx51.c
@@ -74,7 +74,6 @@ static const char *imx51_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
-	.map_io		= mx51_map_io,
 	.init_early	= imx51_init_early,
 	.init_irq	= tzic_init_irq,
 	.init_machine	= imx51_dt_init,
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 40005b8..754c491 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -48,7 +48,6 @@ static const char *imx53_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
-	.map_io		= mx53_map_io,
 	.init_early	= imx53_init_early,
 	.init_irq	= tzic_init_irq,
 	.init_machine	= imx53_dt_init,
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
deleted file mode 100644
index 768fede..0000000
--- a/arch/arm/mach-imx/mm-imx5.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License.  You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/of_address.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v3.h"
-
-/*
- * Define the MX51 memory map.
- */
-static struct map_desc mx51_io_desc[] __initdata = {
-	imx_map_entry(MX51, TZIC, MT_DEVICE),
-	imx_map_entry(MX51, IRAM, MT_DEVICE),
-	imx_map_entry(MX51, AIPS1, MT_DEVICE),
-	imx_map_entry(MX51, SPBA0, MT_DEVICE),
-	imx_map_entry(MX51, AIPS2, MT_DEVICE),
-};
-
-/*
- * Define the MX53 memory map.
- */
-static struct map_desc mx53_io_desc[] __initdata = {
-	imx_map_entry(MX53, TZIC, MT_DEVICE),
-	imx_map_entry(MX53, AIPS1, MT_DEVICE),
-	imx_map_entry(MX53, SPBA0, MT_DEVICE),
-	imx_map_entry(MX53, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx51_map_io(void)
-{
-	iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
-}
-
-void __init mx53_map_io(void)
-{
-	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
-}
-- 
1.8.3.2