[PATCH] ARM: dts: am43xx-clocks: use ti,fixed-factor-clock for dpll_per_clkdcoldo

[Tero Kristo]

On 03/28/2014 10:54 PM, Dave Gerlach wrote:
> Use the ti,fixed-factor-clock version so that autoidle for
> dpll_per_clkdcoldo is properly controlled after power management code
> is introduced. Without this the clock may be held active even when
> it is gated.
>
> Signed-off-by: Dave Gerlach <d-gerlach at ti.com>

Thanks, queued for 3.16/clk-dt.

> ---
>   arch/arm/boot/dts/am43xx-clocks.dtsi | 9 ++++++---
>   1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
> index 142009c..1d9b6bb 100644
> --- a/arch/arm/boot/dts/am43xx-clocks.dtsi
> +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
> @@ -609,10 +609,13 @@
>
>   	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
>   		#clock-cells = <0>;
> -		compatible = "fixed-factor-clock";
> +		compatible = "ti,fixed-factor-clock";
>   		clocks = <&dpll_per_ck>;
> -		clock-mult = <1>;
> -		clock-div = <1>;
> +		ti,clock-mult = <1>;
> +		ti,clock-div = <1>;
> +		ti,autoidle-shift = <8>;
> +		reg = <0x2e14>;
> +		ti,invert-autoidle-bit;
>   	};
>
>   	dll_aging_clk_div: dll_aging_clk_div {
>