[PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data

[Rajendra Nayak]

On Monday 19 May 2014 03:42 PM, Tomi Valkeinen wrote:
> On 19/05/14 12:24, Rajendra Nayak wrote:
>> On Friday 09 May 2014 05:26 PM, Tomi Valkeinen wrote:
>>> From: Sathya Prakash M R <sathyap at ti.com>
>>>
>>> Add DSS hwmod data for AM43xx.
>>>
>>> Signed-off-by: Sathya Prakash M R <sathyap at ti.com>
>>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
>>> ---
>>>  arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 104 +++++++++++++++++++++++++++++
>>>  arch/arm/mach-omap2/prcm43xx.h             |   1 +
>>>  2 files changed, 105 insertions(+)
>>>
>>> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>>> index 5c2cc8083fdd..8c14db2e1e47 100644
>>> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>>> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>>> @@ -19,6 +19,8 @@
>>>  #include "omap_hwmod.h"
>>>  #include "omap_hwmod_33xx_43xx_common_data.h"
>>>  #include "prcm43xx.h"
>>> +#include "omap_hwmod_common_data.h"
>>> +
>>>  
>>>  /* IP blocks */
>>>  static struct omap_hwmod am43xx_l4_hs_hwmod = {
>>> @@ -415,6 +417,76 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
>>>  	},
>>>  };
>>>  
>>> +/* Display sub system - DSS */
>>> +
>>> +static struct omap_hwmod_dma_info am43xx_dss_sdma_chs[] = {
>>> +	{ .name = "dispc", .dma_req = 5 },
>>> +	{ .dma_req = -1 },
>>> +};
>>
>> the dma info needs to come in from DT. Besides these are edma
>> request lines and not sdma.
> 
> Right, the sdma information is not needed anymore.
> 
>>> +
>>> +struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
>>> +	.manager_count		= 1,
>>> +	.has_framedonetv_irq	= 0
>>> +};
>>> +
>>> +
>> []..
>>
>>> +
>>>  /* Interfaces */
>>>  static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
>>>  	.master		= &am33xx_l3_main_hwmod,
>>> @@ -654,6 +726,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
>>>  	.user           = OCP_USER_MPU | OCP_USER_SDMA,
>>>  };
>>>  
>>> +static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
>>> +	.master		= &am43xx_dss_core_hwmod,
>>> +	.slave		= &am33xx_l3_main_hwmod,
>>> +	.clk		= "disp_clk",
>>
>> Isn't l3_gclk that clocks the l3 OCP master port?
> 
> Hmm, possibly... dispc_clk looks a bit odd there. It's been very
> difficult to figure out things like that, with the not-so-good am43xx
> documentation.
> 
> The documentation mentions "L3 Fast Interconnect" and "LCDL3OCPIFCLK"
> related to DSS's OCP master, but searching for those in the TRM doesn't
> reveal much.
> 
> Would the l3_gclk match the "L3 Fast Interconnect" and l3s_gclk match
> the "L3 Slow Interconnect".

Yeah, thats what it looks like to me. l3_gclk is the 200Mhz clock derived from 
core-m4 post divider and l3s_gclk/l4ls_gclk are half of that at 100Mhz, derived
using a fixed divider of 2.

regards,
Rajendra

> 
>  Tomi
> 
>