[PATCH] ARM: dts: imx6qdl-sabresd: Configure the ECSPI1 chip select pin

[Shawn Guo]

On Wed, May 14, 2014 at 04:53:55PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> GPIO4_9 is used as ECSPI1 chip select and it needs to be configured as GPIO.
> 
> Configure the pin functionality explicitly in the dts file instead of relying
> on the fact that it comes configured as GPIO from POR or from the bootloader.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Applied, thanks.