[PATCH 2/7] clk: qcom: Fix mmcc-8974's PLL configurations

Stephen Boyd sboyd at codeaurora.org
Fri May 16 16:07:09 PDT 2014


We forgot to add the status bit for the PLLs and we were using
the wrong register and masks for configuration, leading to
unexpected PLL configurations. Fix this.

Fixes: d8b212014e69 (clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC))
Signed-off-by: Stephen Boyd <sboyd at codeaurora.org>
---
 drivers/clk/qcom/mmcc-msm8974.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c
index 60b7c24a5cd6..62200bbc759e 100644
--- a/drivers/clk/qcom/mmcc-msm8974.c
+++ b/drivers/clk/qcom/mmcc-msm8974.c
@@ -170,6 +170,7 @@ static struct clk_pll mmpll0 = {
 	.config_reg = 0x0014,
 	.mode_reg = 0x0000,
 	.status_reg = 0x001c,
+	.status_bit = 17,
         .clkr.hw.init = &(struct clk_init_data){
                 .name = "mmpll0",
                 .parent_names = (const char *[]){ "xo" },
@@ -193,9 +194,10 @@ static struct clk_pll mmpll1 = {
 	.l_reg = 0x0044,
 	.m_reg = 0x0048,
 	.n_reg = 0x004c,
-	.config_reg = 0x0054,
+	.config_reg = 0x0050,
 	.mode_reg = 0x0040,
 	.status_reg = 0x005c,
+	.status_bit = 17,
         .clkr.hw.init = &(struct clk_init_data){
                 .name = "mmpll1",
                 .parent_names = (const char *[]){ "xo" },
@@ -219,7 +221,7 @@ static struct clk_pll mmpll2 = {
 	.l_reg = 0x4104,
 	.m_reg = 0x4108,
 	.n_reg = 0x410c,
-	.config_reg = 0x4114,
+	.config_reg = 0x4110,
 	.mode_reg = 0x4100,
 	.status_reg = 0x411c,
         .clkr.hw.init = &(struct clk_init_data){
@@ -234,9 +236,10 @@ static struct clk_pll mmpll3 = {
 	.l_reg = 0x0084,
 	.m_reg = 0x0088,
 	.n_reg = 0x008c,
-	.config_reg = 0x0094,
+	.config_reg = 0x0090,
 	.mode_reg = 0x0080,
 	.status_reg = 0x009c,
+	.status_bit = 17,
         .clkr.hw.init = &(struct clk_init_data){
                 .name = "mmpll3",
                 .parent_names = (const char *[]){ "xo" },
@@ -2319,7 +2322,7 @@ static const struct pll_config mmpll1_config = {
 	.vco_val = 0x0,
 	.vco_mask = 0x3 << 20,
 	.pre_div_val = 0x0,
-	.pre_div_mask = 0x3 << 12,
+	.pre_div_mask = 0x7 << 12,
 	.post_div_val = 0x0,
 	.post_div_mask = 0x3 << 8,
 	.mn_ena_mask = BIT(24),
@@ -2333,7 +2336,7 @@ static struct pll_config mmpll3_config = {
 	.vco_val = 0x0,
 	.vco_mask = 0x3 << 20,
 	.pre_div_val = 0x0,
-	.pre_div_mask = 0x3 << 12,
+	.pre_div_mask = 0x7 << 12,
 	.post_div_val = 0x0,
 	.post_div_mask = 0x3 << 8,
 	.mn_ena_mask = BIT(24),
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation




More information about the linux-arm-kernel mailing list