USB with 3.14.3 not working on Freescale i.mx6

[Fabio Estevam]

On Fri, May 16, 2014 at 1:31 PM, Alexander Shiyan <shc_work at mail.ru> wrote:
> Fri, 16 May 2014 13:20:29 -0300 от Fabio Estevam <festevam at gmail.com>:
>> On Wed, May 14, 2014 at 6:17 AM, Till Klocke <till.klocke at yetu.com> wrote:
>> > Hello,
>> >
>> > Currently I am trying to get a recent and stable Linux kernel running
>> > on a Phytec PhyFlex board based on the i.mx6 processor from Freescale.
>>
>> Which dts file do you use?
>>
>> USB is functional on other mx6 boards.
>
> It's just words. Fabio, just give portion of the log (if it possible) where we
> see that USB is works with this kernel version and similar hardware.

Also tested on 3.14.4:

root at freescale /$ uname -r
3.14.4
root at freescale /$ lsusb
Bus 001 Device 002: ID 0457:0151
Bus 001 Device 001: ID 1d6b:0002

USB is working fine on this board and others, so it is 'not only
words' as you said :-)

I am not familiar with "Phytec PhyFlex board" and don't know which dts
file it uses. Also, I haven't seen any kernel logs, so it is difficult
to tell what is wrong with this hardware.