[PATCH v3 03/13] ARM: edma: Do not change TC -> Queue mapping, leave it to default.
Peter Ujfalusi
peter.ujfalusi at ti.com
Fri May 16 05:17:10 PDT 2014
There is no need to change the default TC -> Queue mapping. By default the
mapping is: TC0 -> Q0, TC1 -> Q1, etc.
Changing this has no benefits at all and all the board files are just setting
the same mapping back to the HW.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
arch/arm/common/edma.c | 28 +---------------------------
1 file changed, 1 insertion(+), 27 deletions(-)
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index d42c84a3432a..0bc5ed6fc249 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -290,12 +290,6 @@ static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
~(0x7 << bit), queue_no << bit);
}
-static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no)
-{
- int bit = queue_no * 4;
- edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
-}
-
static void __init assign_priority_to_queue(unsigned ctlr, int queue_no,
int priority)
{
@@ -1470,7 +1464,7 @@ static int edma_of_parse_dt(struct device *dev,
struct property *prop;
size_t sz;
struct edma_rsv_info *rsv_info;
- s8 (*queue_tc_map)[2], (*queue_priority_map)[2];
+ s8 (*queue_priority_map)[2];
ret = of_property_read_u32(node, "dma-channels", &value);
if (ret < 0)
@@ -1495,19 +1489,6 @@ static int edma_of_parse_dt(struct device *dev,
return -ENOMEM;
pdata->rsv = rsv_info;
- queue_tc_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
- if (!queue_tc_map)
- return -ENOMEM;
-
- for (i = 0; i < 3; i++) {
- queue_tc_map[i][0] = i;
- queue_tc_map[i][1] = i;
- }
- queue_tc_map[i][0] = -1;
- queue_tc_map[i][1] = -1;
-
- pdata->queue_tc_mapping = queue_tc_map;
-
queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
if (!queue_priority_map)
return -ENOMEM;
@@ -1568,7 +1549,6 @@ static int edma_probe(struct platform_device *pdev)
struct edma_soc_info **info = pdev->dev.platform_data;
struct edma_soc_info *ninfo[EDMA_MAX_CC] = {NULL};
s8 (*queue_priority_mapping)[2];
- s8 (*queue_tc_mapping)[2];
int i, j, off, ln, found = 0;
int status = -1;
const s16 (*rsv_chans)[2];
@@ -1735,14 +1715,8 @@ static int edma_probe(struct platform_device *pdev)
for (i = 0; i < edma_cc[j]->num_channels; i++)
map_dmach_queue(j, i, info[j]->default_queue);
- queue_tc_mapping = info[j]->queue_tc_mapping;
queue_priority_mapping = info[j]->queue_priority_mapping;
- /* Event queue to TC mapping */
- for (i = 0; queue_tc_mapping[i][0] != -1; i++)
- map_queue_tc(j, queue_tc_mapping[i][0],
- queue_tc_mapping[i][1]);
-
/* Event queue priority mapping */
for (i = 0; queue_priority_mapping[i][0] != -1; i++)
assign_priority_to_queue(j,
--
1.9.3
More information about the linux-arm-kernel
mailing list