[PATCH 1/2] ARM: shmobile: lager: Enable SCIF0 and SCIF1 serial ports in DT

Simon Horman horms+renesas at verge.net.au
Thu May 15 17:58:08 PDT 2014


From: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>

SCIF0 and SCIF1 are used as debug serial ports. Enable them and
configure pinmuxing appropriately. We can now remove the clkdev
registration hack for SCIF devices from the Lager reference board file.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
[horms+renesas at verge.net.au: updated changelog to remove references to
                             device renaming]
[horms+renesas at verge.net.au: resolved conflicts]
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7790-lager.dts            | 21 ++++++++++++++++++++-
 arch/arm/mach-shmobile/board-lager-reference.c | 10 ----------
 arch/arm/mach-shmobile/setup-r8a7790.c         | 10 +++++-----
 3 files changed, 25 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 6e99eb2..25e0485 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -17,6 +17,11 @@
 	model = "Lager";
 	compatible = "renesas,lager", "renesas,r8a7790";
 
+	aliases {
+		serial6 = &scif0;
+		serial7 = &scif1;
+	};
+
 	chosen {
 		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
 	};
@@ -112,7 +117,7 @@
 };
 
 &pfc {
-	pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>;
+	pinctrl-0 = <&du_pins>;
 	pinctrl-names = "default";
 
 	du_pins: du {
@@ -221,6 +226,20 @@
 	};
 };
 
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 1bca2748..749832e 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -91,16 +91,6 @@ static void __init lager_add_du_device(void)
  */
 static const struct clk_name clk_names[] __initconst = {
 	{ "cmt0", "fck", "sh-cmt-48-gen2.0" },
-	{ "scifa0", NULL, "sh-sci.0" },
-	{ "scifa1", NULL, "sh-sci.1" },
-	{ "scifb0", NULL, "sh-sci.2" },
-	{ "scifb1", NULL, "sh-sci.3" },
-	{ "scifb2", NULL, "sh-sci.4" },
-	{ "scifa2", NULL, "sh-sci.5" },
-	{ "scif0", NULL, "sh-sci.6" },
-	{ "scif1", NULL, "sh-sci.7" },
-	{ "hscif0", NULL, "sh-sci.8" },
-	{ "hscif1", NULL, "sh-sci.9" },
 	{ "du0", "du.0", "rcar-du-r8a7790" },
 	{ "du1", "du.1", "rcar-du-r8a7790" },
 	{ "du2", "du.2", "rcar-du-r8a7790" },
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 87327f3..5fc9b17 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -287,6 +287,11 @@ static struct resource cmt0_resources[] = {
 
 void __init r8a7790_add_dt_devices(void)
 {
+	r8a7790_register_cmt(0);
+}
+
+void __init r8a7790_add_standard_devices(void)
+{
 	r8a7790_register_scif(0);
 	r8a7790_register_scif(1);
 	r8a7790_register_scif(2);
@@ -297,11 +302,6 @@ void __init r8a7790_add_dt_devices(void)
 	r8a7790_register_scif(7);
 	r8a7790_register_scif(8);
 	r8a7790_register_scif(9);
-	r8a7790_register_cmt(0);
-}
-
-void __init r8a7790_add_standard_devices(void)
-{
 	r8a7790_add_dt_devices();
 	r8a7790_register_irqc(0);
 	r8a7790_register_thermal();
-- 
1.8.5.2




More information about the linux-arm-kernel mailing list