[PATCH v1 3/5] phy: pci serdes phy driver for keystone

Arnd Bergmann arnd at arndb.de
Thu May 15 09:14:03 PDT 2014


On Thursday 15 May 2014 12:01:30 Murali Karicheri wrote:
> +static struct serdes_config ks_100mhz_pcie_5gbps_serdes[] = {
> +       {0x0000, 0x00000800, 0x0000ff00},
> +       {0x0060, 0x00041c5c, 0x00ffffff},
> +       {0x0064, 0x0343c700, 0xffffff00},
> +       {0x006c, 0x00000012, 0x000000ff},
> +       {0x0068, 0x00070000, 0x00ff0000},
> +       {0x0078, 0x0000c000, 0x0000ff00},

It looks like the PHY is generic, but the configuration above is
PCI specific. If this is true, you should have #phy-cells=<1>
and document the possible modes, adding a lookup table here to
pick the configuration based on the argument. It's fine to just
implement pcie-5ghz initially, but the binding should list all
the modes that the PHY can support.

Also, please list the exact name of the phy if you can find it
out. You mention that you don't know the register descriptions,
but you should at least be able to let us know what phy this
is, in case some other SoC reuses the same thing.

> +static int ks_phy_init(struct phy *phy)
> +{
> +       struct serdes_config *p;
> +       struct phy_keystone *ks_phy = phy_get_drvdata(phy);
> +
> +       int i;
> +
> +       for (i = 0, p = &ks_100mhz_pcie_5gbps_serdes[0];
> +               i < ARRAY_SIZE(ks_100mhz_pcie_5gbps_serdes);
> +               i++, p++) {
> +               reg_rmw((ks_phy->base + p->reg), p->val, p->mask);
> +               reg_dump((ks_phy->base + p->reg), p->mask);
> +       }
> +       udelay(2000);

This should probably be msleep(2);

	Arnd



More information about the linux-arm-kernel mailing list