[PATCH v5 3/5] clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support
Boris BREZILLON
boris.brezillon at free-electrons.com
Thu May 15 01:55:11 PDT 2014
The PRCM (Power/Reset/Clock Management) unit provides several clock
devices:
- AR100 clk: used to clock the Power Management co-processor
- AHB0 clk: used to clock the AHB0 bus
- APB0 clk and gates: used to clk peripherals connected to the APB0 bus
Add support for these clks in a separate driver so that they can be probed
as platform devices instead of registered during early init.
This is needed to be able to probe PRCM MFD subdevices.
Signed-off-by: Boris BREZILLON <boris.brezillon at free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
drivers/clk/sunxi/Makefile | 2 +
drivers/clk/sunxi/clk-sun6i-apb0-gates.c | 99 +++++++++++++
drivers/clk/sunxi/clk-sun6i-apb0.c | 77 ++++++++++
drivers/clk/sunxi/clk-sun6i-ar100.c | 233 +++++++++++++++++++++++++++++++
4 files changed, 411 insertions(+)
create mode 100644 drivers/clk/sunxi/clk-sun6i-apb0-gates.c
create mode 100644 drivers/clk/sunxi/clk-sun6i-apb0.c
create mode 100644 drivers/clk/sunxi/clk-sun6i-ar100.c
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index b5bac91..3d6c124 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -3,3 +3,5 @@
#
obj-y += clk-sunxi.o clk-factors.o
+
+obj-$(CONFIG_MFD_SUN6I_PRCM) += clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o
diff --git a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c
new file mode 100644
index 0000000..44cd27c
--- /dev/null
+++ b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2014 Free Electrons
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Boris BREZILLON <boris.brezillon at free-electrons.com>
+ *
+ * Allwinner A31 APB0 clock gates driver
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define SUN6I_APB0_GATES_MAX_SIZE 32
+
+static int sun6i_a31_apb0_gates_clk_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct clk_onecell_data *clk_data;
+ const char *clk_parent;
+ const char *clk_name;
+ struct resource *r;
+ void __iomem *reg;
+ int gate_id;
+ int ngates;
+ int i;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg = devm_ioremap_resource(&pdev->dev, r);
+ if (!reg)
+ return PTR_ERR(reg);
+
+ clk_parent = of_clk_get_parent_name(np, 0);
+ if (!clk_parent)
+ return -EINVAL;
+
+ ngates = of_property_count_strings(np, "clock-output-names");
+ if (ngates < 0)
+ return ngates;
+
+ if (!ngates || ngates > SUN6I_APB0_GATES_MAX_SIZE)
+ return -EINVAL;
+
+ clk_data = devm_kzalloc(&pdev->dev, sizeof(struct clk_onecell_data),
+ GFP_KERNEL);
+ if (!clk_data)
+ return -ENOMEM;
+
+ clk_data->clks = devm_kzalloc(&pdev->dev,
+ SUN6I_APB0_GATES_MAX_SIZE *
+ sizeof(struct clk *),
+ GFP_KERNEL);
+ if (!clk_data->clks)
+ return -ENOMEM;
+
+ for (i = 0; i < ngates; i++) {
+ of_property_read_string_index(np, "clock-output-names",
+ i, &clk_name);
+
+ gate_id = i;
+ of_property_read_u32_index(np, "clock-indices", i, &gate_id);
+
+ WARN_ON(gate_id >= SUN6I_APB0_GATES_MAX_SIZE);
+ if (gate_id >= SUN6I_APB0_GATES_MAX_SIZE)
+ continue;
+
+ clk_data->clks[gate_id] = clk_register_gate(&pdev->dev,
+ clk_name,
+ clk_parent, 0,
+ reg, gate_id,
+ 0, NULL);
+ WARN_ON(IS_ERR(clk_data->clks[gate_id]));
+ }
+
+ clk_data->clk_num = ngates;
+
+ return of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
+}
+
+const struct of_device_id sun6i_a31_apb0_gates_clk_dt_ids[] = {
+ { .compatible = "allwinner,sun6i-a31-apb0-gates-clk" },
+ { /* sentinel */ }
+};
+
+static struct platform_driver sun6i_a31_apb0_gates_clk_driver = {
+ .driver = {
+ .name = "sun6i-a31-apb0-gates-clk",
+ .owner = THIS_MODULE,
+ .of_match_table = sun6i_a31_apb0_gates_clk_dt_ids,
+ },
+ .probe = sun6i_a31_apb0_gates_clk_probe,
+};
+module_platform_driver(sun6i_a31_apb0_gates_clk_driver);
+
+MODULE_AUTHOR("Boris BREZILLON <boris.brezillon at free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner A31 APB0 gate clocks driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/sunxi/clk-sun6i-apb0.c b/drivers/clk/sunxi/clk-sun6i-apb0.c
new file mode 100644
index 0000000..11f17c3
--- /dev/null
+++ b/drivers/clk/sunxi/clk-sun6i-apb0.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2014 Free Electrons
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Boris BREZILLON <boris.brezillon at free-electrons.com>
+ *
+ * Allwinner A31 APB0 clock driver
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+/*
+ * The APB0 clk has a configurable divisor.
+ *
+ * We must use a clk_div_table and not a regular power of 2
+ * divisor here, because the first 2 values divide the clock
+ * by 2.
+ */
+static const struct clk_div_table sun6i_a31_apb0_divs[] = {
+ { .val = 0, .div = 2, },
+ { .val = 1, .div = 2, },
+ { .val = 2, .div = 4, },
+ { .val = 3, .div = 8, },
+ { /* sentinel */ },
+};
+
+static int sun6i_a31_apb0_clk_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ const char *clk_name = np->name;
+ const char *clk_parent;
+ struct resource *r;
+ void __iomem *reg;
+ struct clk *clk;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
+ clk_parent = of_clk_get_parent_name(np, 0);
+ if (!clk_parent)
+ return -EINVAL;
+
+ of_property_read_string(np, "clock-output-names", &clk_name);
+
+ clk = clk_register_divider_table(&pdev->dev, clk_name, clk_parent,
+ 0, reg, 0, 2, 0, sun6i_a31_apb0_divs,
+ NULL);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ return of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+const struct of_device_id sun6i_a31_apb0_clk_dt_ids[] = {
+ { .compatible = "allwinner,sun6i-a31-apb0-clk" },
+ { /* sentinel */ }
+};
+
+static struct platform_driver sun6i_a31_apb0_clk_driver = {
+ .driver = {
+ .name = "sun6i-a31-apb0-clk",
+ .owner = THIS_MODULE,
+ .of_match_table = sun6i_a31_apb0_clk_dt_ids,
+ },
+ .probe = sun6i_a31_apb0_clk_probe,
+};
+module_platform_driver(sun6i_a31_apb0_clk_driver);
+
+MODULE_AUTHOR("Boris BREZILLON <boris.brezillon at free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner A31 APB0 clock Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/sunxi/clk-sun6i-ar100.c b/drivers/clk/sunxi/clk-sun6i-ar100.c
new file mode 100644
index 0000000..f73cc05
--- /dev/null
+++ b/drivers/clk/sunxi/clk-sun6i-ar100.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2014 Free Electrons
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Boris BREZILLON <boris.brezillon at free-electrons.com>
+ *
+ * Allwinner A31 AR100 clock driver
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define SUN6I_AR100_MAX_PARENTS 4
+#define SUN6I_AR100_SHIFT_MASK 0x3
+#define SUN6I_AR100_SHIFT_MAX SUN6I_AR100_SHIFT_MASK
+#define SUN6I_AR100_SHIFT_SHIFT 4
+#define SUN6I_AR100_DIV_MASK 0x1f
+#define SUN6I_AR100_DIV_MAX (SUN6I_AR100_DIV_MASK + 1)
+#define SUN6I_AR100_DIV_SHIFT 8
+#define SUN6I_AR100_MUX_MASK 0x3
+#define SUN6I_AR100_MUX_SHIFT 16
+
+struct ar100_clk {
+ struct clk_hw hw;
+ void __iomem *reg;
+};
+
+static inline struct ar100_clk *to_ar100_clk(struct clk_hw *hw)
+{
+ return container_of(hw, struct ar100_clk, hw);
+}
+
+static unsigned long ar100_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct ar100_clk *clk = to_ar100_clk(hw);
+ u32 val = readl(clk->reg);
+ int shift = (val >> SUN6I_AR100_SHIFT_SHIFT) & SUN6I_AR100_SHIFT_MASK;
+ int div = (val >> SUN6I_AR100_DIV_SHIFT) & SUN6I_AR100_DIV_MASK;
+
+ return (parent_rate >> shift) / (div + 1);
+}
+
+static long ar100_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_clk)
+{
+ int nparents = __clk_get_num_parents(hw->clk);
+ long best_rate = -EINVAL;
+ int i;
+
+ *best_parent_clk = NULL;
+
+ for (i = 0; i < nparents; i++) {
+ unsigned long parent_rate;
+ unsigned long tmp_rate;
+ struct clk *parent;
+ unsigned long div;
+ int shift;
+
+ parent = clk_get_parent_by_index(hw->clk, i);
+ parent_rate = __clk_get_rate(parent);
+ div = DIV_ROUND_UP(parent_rate, rate);
+
+ /*
+ * The AR100 clk contains 2 divisors:
+ * - one power of 2 divisor
+ * - one regular divisor
+ *
+ * First check if we can safely shift (or divide by a power
+ * of 2) without losing precision on the requested rate.
+ */
+ shift = ffs(div) - 1;
+ if (shift > SUN6I_AR100_SHIFT_MAX)
+ shift = SUN6I_AR100_SHIFT_MAX;
+
+ div >>= shift;
+
+ /*
+ * Then if the divisor is still bigger than what the HW
+ * actually supports, use a bigger shift (or power of 2
+ * divider) value and accept to lose some precision.
+ */
+ while (div > SUN6I_AR100_DIV_MAX) {
+ shift++;
+ div >>= 1;
+ if (shift > SUN6I_AR100_SHIFT_MAX)
+ break;
+ }
+
+ /*
+ * If the shift value (or power of 2 divider) is bigger
+ * than what the HW actually support, skip this parent.
+ */
+ if (shift > SUN6I_AR100_SHIFT_MAX)
+ continue;
+
+ tmp_rate = (parent_rate >> shift) / div;
+ if (!*best_parent_clk || tmp_rate > best_rate) {
+ *best_parent_clk = parent;
+ *best_parent_rate = parent_rate;
+ best_rate = tmp_rate;
+ }
+ }
+
+ return best_rate;
+}
+
+static int ar100_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct ar100_clk *clk = to_ar100_clk(hw);
+ u32 val = readl(clk->reg);
+
+ if (index >= SUN6I_AR100_MAX_PARENTS)
+ return -EINVAL;
+
+ val &= ~(SUN6I_AR100_MUX_MASK << SUN6I_AR100_MUX_SHIFT);
+ val |= (index << SUN6I_AR100_MUX_SHIFT);
+ writel(val, clk->reg);
+
+ return 0;
+}
+
+static u8 ar100_get_parent(struct clk_hw *hw)
+{
+ struct ar100_clk *clk = to_ar100_clk(hw);
+ return (readl(clk->reg) >> SUN6I_AR100_MUX_SHIFT) &
+ SUN6I_AR100_MUX_MASK;
+}
+
+static int ar100_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ unsigned long div = parent_rate / rate;
+ struct ar100_clk *clk = to_ar100_clk(hw);
+ u32 val = readl(clk->reg);
+ int shift;
+
+ if (parent_rate % rate)
+ return -EINVAL;
+
+ shift = ffs(div) - 1;
+ if (shift > SUN6I_AR100_SHIFT_MAX)
+ shift = SUN6I_AR100_SHIFT_MAX;
+
+ div >>= shift;
+
+ if (div > SUN6I_AR100_DIV_MAX)
+ return -EINVAL;
+
+ val &= ~((SUN6I_AR100_SHIFT_MASK << SUN6I_AR100_SHIFT_SHIFT) |
+ (SUN6I_AR100_DIV_MASK << SUN6I_AR100_DIV_SHIFT));
+ val |= (shift << SUN6I_AR100_SHIFT_SHIFT) |
+ (div << SUN6I_AR100_DIV_SHIFT);
+ writel(val, clk->reg);
+
+ return 0;
+}
+
+struct clk_ops ar100_ops = {
+ .recalc_rate = ar100_recalc_rate,
+ .determine_rate = ar100_determine_rate,
+ .set_parent = ar100_set_parent,
+ .get_parent = ar100_get_parent,
+ .set_rate = ar100_set_rate,
+};
+
+static int sun6i_a31_ar100_clk_probe(struct platform_device *pdev)
+{
+ const char *parents[SUN6I_AR100_MAX_PARENTS];
+ struct device_node *np = pdev->dev.of_node;
+ const char *clk_name = np->name;
+ struct clk_init_data init;
+ struct ar100_clk *ar100;
+ struct resource *r;
+ struct clk *clk;
+ int nparents;
+ int i;
+
+ ar100 = devm_kzalloc(&pdev->dev, sizeof(*ar100), GFP_KERNEL);
+ if (!ar100)
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ar100->reg = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(ar100->reg))
+ return PTR_ERR(ar100->reg);
+
+ nparents = of_clk_get_parent_count(np);
+ if (nparents > SUN6I_AR100_MAX_PARENTS)
+ nparents = SUN6I_AR100_MAX_PARENTS;
+
+ for (i = 0; i < nparents; i++)
+ parents[i] = of_clk_get_parent_name(np, i);
+
+ of_property_read_string(np, "clock-output-names", &clk_name);
+
+ init.name = clk_name;
+ init.ops = &ar100_ops;
+ init.parent_names = parents;
+ init.num_parents = nparents;
+ init.flags = 0;
+
+ ar100->hw.init = &init;
+
+ clk = clk_register(&pdev->dev, &ar100->hw);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ return of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+const struct of_device_id sun6i_a31_ar100_clk_dt_ids[] = {
+ { .compatible = "allwinner,sun6i-a31-ar100-clk" },
+ { /* sentinel */ }
+};
+
+static struct platform_driver sun6i_a31_ar100_clk_driver = {
+ .driver = {
+ .name = "sun6i-a31-ar100-clk",
+ .owner = THIS_MODULE,
+ .of_match_table = sun6i_a31_ar100_clk_dt_ids,
+ },
+ .probe = sun6i_a31_ar100_clk_probe,
+};
+module_platform_driver(sun6i_a31_ar100_clk_driver);
+
+MODULE_AUTHOR("Boris BREZILLON <boris.brezillon at free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner A31 AR100 clock Driver");
+MODULE_LICENSE("GPL v2");
--
1.8.3.2
More information about the linux-arm-kernel
mailing list