[PATCHv5 4/5] dt-bindings: add documentation for Exynos3250 clock controller

[Tomasz Figa]

Hi,

On 13.05.2014 15:05, Chanwoo Choi wrote:
> The Exynos3250 clocks are statically listed and registered using the
> Samsung specific common clock helper functions. Both device tree based
> clock lookup and clkdev based clock lookups are supported.
> 
> Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
> Signed-off-by: Tomasz Figa <t.figa at samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
> Cc: Mike Turquette <mturquette at linaro.org>
> Cc: Kukjin Kim <kgene.kim at samsung.com>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Pawel Moll <pawel.moll at arm.com>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: Ian Campbell <ijc+devicetree at hellion.org.uk>
> Cc: Kumar Gala <galak at codeaurora.org>
> Cc: Randy Dunlap <rdunlap at infradead.org>
> Cc: Tomasz Figa <t.figa at samsung.com>
> ---
>  .../devicetree/bindings/clock/exynos3250-clock.txt | 41 ++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/exynos3250-clock.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
> new file mode 100644
> index 0000000..aadc9c5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt
> @@ -0,0 +1,41 @@
> +* Samsung Exynos3250 Clock Controller
> +
> +The Exynos3250 clock controller generates and supplies clock to various
> +controllers within the Exynos3250 SoC.
> +
> +Required Properties:
> +
> +- compatible: should be one of the following.
> +  - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC.
> +
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +
> +- #clock-cells: should be 1.
> +
> +Each clock is assigned an identifier and client nodes can use this identifier
> +to specify the clock which they consume.
> +
> +All available clocks are defined as preprocessor macros in
> +dt-bindings/clock/exynos3250.h header and can be used in device
> +tree sources.
> +
> +Example 1: An example of a clock controller node is listed below.
> +
> +	cmu: clock-controller at 10030000 {
> +		compatible = "samsung,exynos3250-cmu";
> +		reg = <0x10030000 0x20000>;
> +		#clock-cells = <1>;
> +	};
> +
> +Example 2: UART controller node that consumes the clock generated by the clock
> +	   controller. Refer to the standard clock bindings for information
> +	   about 'clocks' and 'clock-names' property.
> +
> +	serial at 13800000 {
> +		compatible = "samsung,exynos4210-uart";
> +		reg = <0x13800000 0x100>;
> +		interrupts = <0 109 0>;
> +		clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
> +		clock-names = "uart", "clk_uart_baud0";
> +	};
> 

Oops, I've forgotten to apply this one. Since it doesn't have any
dependencies, Kukjin, could you apply it on top of my pull requests with
my Ack? Thanks in advance.

Acked-by: Tomasz Figa <t.figa at samsung.com>

Best regards,
Tomasz