[PATCH v4 2/4] ARM: at91/dt: define sam9x5 clocks

Boris BREZILLON boris.brezillon at free-electrons.com
Tue May 13 07:51:24 PDT 2014


Define sam9x5 clocks in sam9x5 dt files and make use of them in peripheral
definitions.

Signed-off-by: Boris BREZILLON <boris.brezillon at free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
---
Hello,

Sorry for the noise, I modified the wrong compatible property (main_clk
instead of main_osc_clk).

This version revert the modification introduced in v3 and fix the
main_osc_clk compatible property.

Best Regards,

Boris

Changes since v3:
- revert v2 fix and fix main osc clk compatible string

Changes since v2:
- fix main clk compatible string

 arch/arm/boot/dts/at91sam9x5.dtsi        | 355 ++++++++++++++++++++++++++++++-
 arch/arm/boot/dts/at91sam9x5_can.dtsi    |  31 +++
 arch/arm/boot/dts/at91sam9x5_isi.dtsi    |  26 +++
 arch/arm/boot/dts/at91sam9x5_lcd.dtsi    |  26 +++
 arch/arm/boot/dts/at91sam9x5_macb0.dtsi  |  11 +
 arch/arm/boot/dts/at91sam9x5_macb1.dtsi  |  11 +
 arch/arm/boot/dts/at91sam9x5_usart3.dtsi |  11 +
 7 files changed, 470 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/at91sam9x5_can.dtsi
 create mode 100644 arch/arm/boot/dts/at91sam9x5_isi.dtsi
 create mode 100644 arch/arm/boot/dts/at91sam9x5_lcd.dtsi

diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index fc13c92..1a57298 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
 	model = "Atmel AT91SAM9x5 family SoC";
@@ -51,6 +52,24 @@
 		reg = <0x20000000 0x10000000>;
 	};
 
+	slow_xtal: slow_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	main_xtal: main_xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	adc_op_clk: adc_op_clk{
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <5000000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -77,8 +96,272 @@
 			};
 
 			pmc: pmc at fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
+				compatible = "atmel,at91sam9x5-pmc";
 				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <50000000>;
+				};
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc>, <&main_osc>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <2000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <745000000 800000000 0 0
+								       695000000 750000000 1 0
+								       645000000 700000000 2 0
+								       595000000 650000000 3 0
+								       545000000 600000000 0 1
+								       495000000 555000000 1 1
+								       445000000 500000000 1 2
+								       400000000 450000000 1 3>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKU>;
+					clocks = <&main>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+					atmel,clk-output-range = <0 133333333>;
+					atmel,clk-divisors = <1 2 4 3>;
+					atmel,master-clk-have-div3-pres;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9x5-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+				};
+
+				smd: smdclk {
+					compatible = "atmel,at91sam9x5-clk-smd";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					smdck: smdck {
+						#clock-cells = <0>;
+						reg = <4>;
+						clocks = <&smd>;
+					};
+
+					uhpck: uhpck {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					pioAB_clk: pioAB_clk {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					pioCD_clk: pioCD_clk {
+						#clock-cells = <0>;
+						reg = <3>;
+					};
+
+					smd_clk: smd_clk {
+						#clock-cells = <0>;
+						reg = <4>;
+					};
+
+					usart0_clk: usart0_clk {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					usart1_clk: usart1_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart2_clk: usart2_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					twi0_clk: twi0_clk {
+						reg = <9>;
+						#clock-cells = <0>;
+					};
+
+					twi1_clk: twi1_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					twi2_clk: twi2_clk {
+						#clock-cells = <0>;
+						reg = <11>;
+					};
+
+					mci0_clk: mci0_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					spi1_clk: spi1_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					uart0_clk: uart0_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					uart1_clk: uart1_clk {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tcb0_clk: tcb0_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					pwm_clk: pwm_clk {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					adc_clk: adc_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					dma0_clk: dma0_clk {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					dma1_clk: dma1_clk {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+
+					uhphs_clk: uhphs_clk {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					udphs_clk: udphs_clk {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+
+					mci1_clk: mci1_clk {
+						#clock-cells = <0>;
+						reg = <26>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+				};
 			};
 
 			rstc at fffffe00 {
@@ -95,18 +378,47 @@
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			sckc at fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc>, <&slow_osc>;
+				};
 			};
 
 			tcb0: timer at f8008000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>;
+				clock-names = "t0_clk";
 			};
 
 			tcb1: timer at f800c000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf800c000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>;
+				clock-names = "t0_clk";
 			};
 
 			dma0: dma-controller at ffffec00 {
@@ -114,6 +426,8 @@
 				reg = <0xffffec00 0x200>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
 			};
 
 			dma1: dma-controller at ffffee00 {
@@ -121,6 +435,8 @@
 				reg = <0xffffee00 0x200>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
+				clocks = <&dma1_clk>;
+				clock-names = "dma_clk";
 			};
 
 			pinctrl at fffff400 {
@@ -453,6 +769,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioAB_clk>;
 				};
 
 				pioB: gpio at fffff600 {
@@ -464,6 +781,7 @@
 					#gpio-lines = <19>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioAB_clk>;
 				};
 
 				pioC: gpio at fffff800 {
@@ -474,6 +792,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioCD_clk>;
 				};
 
 				pioD: gpio at fffffa00 {
@@ -485,6 +804,7 @@
 					#gpio-lines = <22>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
+					clocks = <&pioCD_clk>;
 				};
 			};
 
@@ -497,6 +817,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
 				status = "disabled";
 			};
 
@@ -507,6 +829,8 @@
 				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
 				pinctrl-names = "default";
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -519,6 +843,8 @@
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
 				pinctrl-names = "default";
+				clocks = <&mci1_clk>;
+				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -530,6 +856,8 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -539,6 +867,8 @@
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -548,6 +878,8 @@
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -557,6 +889,8 @@
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -571,6 +905,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&twi0_clk>;
 				status = "disabled";
 			};
 
@@ -585,6 +920,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&twi1_clk>;
 				status = "disabled";
 			};
 
@@ -599,6 +935,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c2>;
+				clocks = <&twi2_clk>;
 				status = "disabled";
 			};
 
@@ -608,6 +945,8 @@
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -617,6 +956,8 @@
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 
@@ -626,6 +967,9 @@
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xf804c000 0x100>;
 				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&adc_clk>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
 				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0xffff>;
 				atmel,adc-vref = <3300>;
@@ -673,6 +1017,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
@@ -687,6 +1033,8 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
@@ -805,6 +1153,9 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
+				 <&uhpck>;
+			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 
@@ -812,6 +1163,8 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi
new file mode 100644
index 0000000..f44ab77
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi
@@ -0,0 +1,31 @@
+/*
+ * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pmc: pmc at fffffc00 {
+				periphck {
+					can0_clk: can0_clk {
+						#clock-cells = <0>;
+						reg = <29>;
+					};
+
+                                        can1_clk: can1_clk {
+                                                #clock-cells = <0>;
+                                                reg = <30>;
+                                        };
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
new file mode 100644
index 0000000..98bc877
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
@@ -0,0 +1,26 @@
+/*
+ * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * Image Sensor Interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pmc: pmc at fffffc00 {
+				periphck {
+					isi_clk: isi_clk {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
new file mode 100644
index 0000000..485302e
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
@@ -0,0 +1,26 @@
+/*
+ * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * LCD controller.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pmc: pmc at fffffc00 {
+				periphck {
+					lcdc_clk: lcdc_clk {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
index 55731ff..57e89d1 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
@@ -43,12 +43,23 @@
 				};
 			};
 
+			pmc: pmc at fffffc00 {
+				periphck {
+					macb0_clk: macb0_clk {
+						#clock-cells = <0>;
+						reg = <24>;
+					};
+				};
+			};
+
 			macb0: ethernet at f802c000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
index 77425a6..663676c 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
@@ -31,12 +31,23 @@
 				};
 			};
 
+			pmc: pmc at fffffc00 {
+				periphck {
+					macb1_clk: macb1_clk {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+				};
+			};
+
 			macb1: ethernet at f8030000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xf8030000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				clocks = <&macb1_clk>, <&macb1_clk>;
+				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index 6801106..140217a5 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -42,12 +42,23 @@
 				};
 			};
 
+			pmc: pmc at fffffc00 {
+				periphck {
+					usart3_clk: usart3_clk {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+				};
+			};
+
 			usart3: serial at f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x200>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
 				status = "disabled";
 			};
 		};
-- 
1.8.3.2




More information about the linux-arm-kernel mailing list