[STLinux Kernel] [PATCH v4 5/6] ARM: dts: Add STiH407 SoC support

Patrice Chotard patrice.chotard at st.com
Tue May 13 05:04:35 PDT 2014


On 03/12/2014 09:50 AM, Maxime COQUELIN wrote:
> The STiH407 is advanced multi-HD AVC processor with 3D graphics acceleration
> and 1.5-GHz ARM Cortex-A9 SMP CPU.
>
> Acked-by: Giuseppe Cavallaro <peppe.cavallaro at st.com>
> Acked-by: Lee Jones <lee.jones at linaro.org>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro at st.com>
> Signed-off-by: Maxime Coquelin <maxime.coquelin at st.com>
> ---
>   arch/arm/boot/dts/stih407-clock.dtsi   |  40 +++
>   arch/arm/boot/dts/stih407-pinctrl.dtsi | 615 +++++++++++++++++++++++++++++++++
>   arch/arm/boot/dts/stih407.dtsi         | 263 ++++++++++++++
>   3 files changed, 918 insertions(+)
>   create mode 100644 arch/arm/boot/dts/stih407-clock.dtsi
>   create mode 100644 arch/arm/boot/dts/stih407-pinctrl.dtsi
>   create mode 100644 arch/arm/boot/dts/stih407.dtsi
>
> diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
> new file mode 100644
> index 0000000..ae8068c
> --- /dev/null
> +++ b/arch/arm/boot/dts/stih407-clock.dtsi
> @@ -0,0 +1,40 @@
> +/*
> + * Copyright (C) 2014 STMicroelectronics R&D Limited
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/ {
> +	clocks {
> +		/*
> +		 * Fixed 30MHz oscillator inputs to SoC
> +		 */
> +		CLK_SYSIN: CLK_SYSIN {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <30000000>;
> +			clock-output-names = "CLK_SYSIN";
> +		};
> +
> +		/*
> +		 * ARM Peripheral clock for timers
> +		 */
> +		arm_periph_clk: arm_periph_clk {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <600000000>;
> +		};
> +
> +		/*
> +		 * Bootloader initialized system infrastructure clock for
> +		 * serial devices.
> +		 */
> +		CLK_EXT2F_A9: clockgenC0 at 13 {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <200000000>;
> +			clock-output-names = "CLK_S_ICN_REG_0";
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
> new file mode 100644
> index 0000000..74aac5a
> --- /dev/null
> +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
> @@ -0,0 +1,615 @@
> +/*
> + * Copyright (C) 2014 STMicroelectronics Limited.
> + * Author: Giuseppe Cavallaro <peppe.cavallaro at st.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * publishhed by the Free Software Foundation.
> + */
> +#include "st-pincfg.h"
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +/ {
> +
> +	aliases {
> +		/* 0-5: PIO_SBC */
> +		gpio0 = &PIO0;
> +		gpio1 = &PIO1;
> +		gpio2 = &PIO2;
> +		gpio3 = &PIO3;
> +		gpio4 = &PIO4;
> +		gpio5 = &PIO5;
> +		/* 10-19: PIO_FRONT0 */
> +		gpio6 = &PIO10;
> +		gpio7 = &PIO11;
> +		gpio8 = &PIO12;
> +		gpio9 = &PIO13;
> +		gpio10 = &PIO14;
> +		gpio11 = &PIO15;
> +		gpio12 = &PIO16;
> +		gpio13 = &PIO17;
> +		gpio14 = &PIO18;
> +		gpio15 = &PIO19;
> +		/* 20: PIO_FRONT1 */
> +		gpio16 = &PIO20;
> +		/* 30-35: PIO_REAR */
> +		gpio17 = &PIO30;
> +		gpio18 = &PIO31;
> +		gpio19 = &PIO32;
> +		gpio20 = &PIO33;
> +		gpio21 = &PIO34;
> +		gpio22 = &PIO35;
> +		/* 40-42: PIO_FLASH */
> +		gpio23 = &PIO40;
> +		gpio24 = &PIO41;
> +		gpio25 = &PIO42;
> +	};
> +
> +	soc {
> +		pin-controller-sbc {
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			compatible = "st,stih407-sbc-pinctrl";
> +			st,syscfg = <&syscfg_sbc>;
> +			reg = <0x0961f080 0x4>;
> +			reg-names = "irqmux";
> +			interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
> +			interrupts-names = "irqmux";
> +			ranges = <0 0x09610000 0x6000>;
> +
> +			PIO0: gpio at 09610000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x0 0x100>;
> +				st,bank-name = "PIO0";
> +			};
> +			PIO1: gpio at 09611000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x1000 0x100>;
> +				st,bank-name = "PIO1";
> +			};
> +			PIO2: gpio at 09612000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x2000 0x100>;
> +				st,bank-name = "PIO2";
> +			};
> +			PIO3: gpio at 09613000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x3000 0x100>;
> +				st,bank-name = "PIO3";
> +			};
> +			PIO4: gpio at 09614000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x4000 0x100>;
> +				st,bank-name = "PIO4";
> +			};
> +
> +			PIO5: gpio at 09615000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x5000 0x100>;
> +				st,bank-name = "PIO5";
> +			};
> +
> +			rc {
> +				pinctrl_ir: ir0 {
> +					st,pins {
> +						ir = <&PIO4 0 ALT2 IN>;
> +					};
> +				};
> +			};
> +
> +			/* SBC_ASC0 - UART10 */
> +			sbc_serial0 {
> +				pinctrl_sbc_serial0: sbc_serial0-0 {
> +					st,pins {
> +						tx = <&PIO3 4 ALT1 OUT>;
> +						rx = <&PIO3 5 ALT1 IN>;
> +					};
> +				};
> +			};
> +			/* SBC_ASC1 - UART11 */
> +			sbc_serial1 {
> +				pinctrl_sbc_serial1: sbc_serial1-0 {
> +					st,pins {
> +						tx = <&PIO2 6 ALT3 OUT>;
> +						rx = <&PIO2 7 ALT3 IN>;
> +					};
> +				};
> +			};
> +
> +			i2c10 {
> +				pinctrl_i2c10_default: i2c10-default {
> +					st,pins {
> +						sda = <&PIO4 6 ALT1 BIDIR>;
> +						scl = <&PIO4 5 ALT1 BIDIR>;
> +					};
> +				};
> +			};
> +
> +			i2c11 {
> +				pinctrl_i2c11_default: i2c11-default {
> +					st,pins {
> +						sda = <&PIO5 1 ALT1 BIDIR>;
> +						scl = <&PIO5 0 ALT1 BIDIR>;
> +					};
> +				};
> +			};
> +
> +			keyscan {
> +				pinctrl_keyscan: keyscan {
> +					st,pins {
> +						keyin0 = <&PIO4 0 ALT6 IN>;
> +						keyin1 = <&PIO4 5 ALT4 IN>;
> +						keyin2 = <&PIO0 4 ALT2 IN>;
> +						keyin3 = <&PIO2 6 ALT2 IN>;
> +
> +						keyout0 = <&PIO4 6 ALT4 OUT>;
> +						keyout1 = <&PIO1 7 ALT2 OUT>;
> +						keyout2 = <&PIO0 6 ALT2 OUT>;
> +						keyout3 = <&PIO2 7 ALT2 OUT>;
> +					};
> +				};
> +			};
> +
> +			gmac1 {
> +				/*
> +				 * Almost all the boards based on STiH407 SoC have an embedded
> +				 * switch where the mdio/mdc have been used for managing the SMI
> +				 * iface via I2C. For this reason these lines can be allocated
> +				 * by using dedicated configuration (in case of there will be a
> +				 * standard PHY transceiver on-board).
> +				 */
> +				pinctrl_rgmii1: rgmii1-0 {
> +					st,pins {
> +
> +						txd0 = <&PIO0 0 ALT1 OUT DE_IO 0 CLK_A>;
> +						txd1 = <&PIO0 1 ALT1 OUT DE_IO 0 CLK_A>;
> +						txd2 = <&PIO0 2 ALT1 OUT DE_IO 0 CLK_A>;
> +						txd3 = <&PIO0 3 ALT1 OUT DE_IO 0 CLK_A>;
> +						txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>;
> +						txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
> +						rxd0 = <&PIO1 4 ALT1 IN DE_IO 0 CLK_A>;
> +						rxd1 = <&PIO1 5 ALT1 IN DE_IO 0 CLK_A>;
> +						rxd2 = <&PIO1 6 ALT1 IN DE_IO 0 CLK_A>;
> +						rxd3 = <&PIO1 7 ALT1 IN DE_IO 0 CLK_A>;
> +						rxdv = <&PIO2 0 ALT1 IN DE_IO 0 CLK_A>;
> +						rxclk = <&PIO2 2 ALT1 IN NICLK 500 CLK_A>;
> +						clk125 = <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
> +						phyclk = <&PIO2 3 ALT4 OUT NICLK 1750 CLK_B>;
> +					};
> +				};
> +
> +				pinctrl_rgmii1_mdio: rgmii1-mdio {
> +					st,pins {
> +						mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
> +						mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
> +						mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
> +					};
> +				};
> +
> +				pinctrl_mii1: mii1 {
> +					st,pins {
> +						txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> +						txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> +						txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> +						txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> +						txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> +						txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
> +						txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
> +						col = <&PIO0 7 ALT1 IN BYPASS 1000>;
> +
> +						mdio = <&PIO1 0 ALT1 OUT BYPASS 1500>;
> +						mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
> +						crs = <&PIO1 2 ALT1 IN BYPASS 1000>;
> +						mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
> +						rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> +						rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> +						rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> +						rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> +
> +						rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> +						rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
> +						rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
> +						phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>;
> +					};
> +				};
> +			};
> +
> +			pwm1 {
> +				pinctrl_pwm1_chan0_default: pwm1-0-default {
> +					st,pins {
> +						pwm-out = <&PIO3 0 ALT1 OUT>;
> +					};
> +				};
> +				pinctrl_pwm1_chan1_default: pwm1-1-default {
> +					st,pins {
> +						pwm-out = <&PIO4 4 ALT1 OUT>;
> +					};
> +				};
> +				pinctrl_pwm1_chan2_default: pwm1-2-default {
> +					st,pins {
> +						pwm-out = <&PIO4 6 ALT3 OUT>;
> +					};
> +				};
> +				pinctrl_pwm1_chan3_default: pwm1-3-default {
> +					st,pins {
> +						pwm-out = <&PIO4 7 ALT3 OUT>;
> +					};
> +				};
> +			};
> +		};
> +
> +		pin-controller-front0 {
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			compatible = "st,stih407-front-pinctrl";
> +			st,syscfg = <&syscfg_front>;
> +			reg = <0x0920f080 0x4>;
> +			reg-names = "irqmux";
> +			interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
> +			interrupts-names = "irqmux";
> +			ranges = <0 0x09200000 0x10000>;
> +
> +			PIO10: PIO at 09200000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x0 0x100>;
> +				st,bank-name = "PIO10";
> +			};
> +			PIO11: PIO at 09201000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x1000 0x100>;
> +				st,bank-name = "PIO11";
> +			};
> +			PIO12: PIO at 09202000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x2000 0x100>;
> +				st,bank-name = "PIO12";
> +			};
> +			PIO13: PIO at 09203000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x3000 0x100>;
> +				st,bank-name = "PIO13";
> +			};
> +			PIO14: PIO at 09204000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x4000 0x100>;
> +				st,bank-name = "PIO14";
> +			};
> +			PIO15: PIO at 09205000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x5000 0x100>;
> +				st,bank-name = "PIO15";
> +			};
> +			PIO16: PIO at 09206000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x6000 0x100>;
> +				st,bank-name = "PIO16";
> +			};
> +			PIO17: PIO at 09207000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x7000 0x100>;
> +				st,bank-name = "PIO17";
> +			};
> +			PIO18: PIO at 09208000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x8000 0x100>;
> +				st,bank-name = "PIO18";
> +			};
> +			PIO19: PIO at 09209000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x9000 0x100>;
> +				st,bank-name = "PIO19";
> +			};
> +
> +			/* Comms */
> +			serial0 {
> +				pinctrl_serial0: serial0-0 {
> +					st,pins {
> +						tx = <&PIO17 0 ALT1 OUT>;
> +						rx = <&PIO17 1 ALT1 IN>;
> +					};
> +				};
> +			};
> +
> +			serial1 {
> +				pinctrl_serial1: serial1-0 {
> +					st,pins {
> +						tx = <&PIO16 0 ALT1 OUT>;
> +						rx = <&PIO16 1 ALT1 IN>;
> +					};
> +				};
> +			};
> +
> +			serial2 {
> +				pinctrl_serial2: serial2-0 {
> +					st,pins {
> +						tx = <&PIO15 0 ALT1 OUT>;
> +						rx = <&PIO15 1 ALT1 IN>;
> +					};
> +				};
> +			};
> +
> +			mmc1 {
> +				pinctrl_sd1: sd1-0 {
> +					st,pins {
> +						sd_clk = <&PIO19 3 ALT5 BIDIR NICLK 0 CLK_B>;
> +						sd_cmd = <&PIO19 2 ALT5 BIDIR_PU BYPASS 0>;
> +						sd_dat0 = <&PIO19 4 ALT5 BIDIR_PU BYPASS 0>;
> +						sd_dat1 = <&PIO19 5 ALT5 BIDIR_PU BYPASS 0>;
> +						sd_dat2 = <&PIO19 6 ALT5 BIDIR_PU BYPASS 0>;
> +						sd_dat3 = <&PIO19 7 ALT5 BIDIR_PU BYPASS 0>;
> +						sd_led = <&PIO16 6 ALT6 OUT>;
> +						sd_pwren = <&PIO16 7 ALT6 OUT>;
> +						sd_cd = <&PIO19 0 ALT6 IN>;
> +						sd_wp = <&PIO19 1 ALT6 IN>;
> +					};
> +				};
> +			};
> +
> +
> +			i2c0 {
> +				pinctrl_i2c0_default: i2c0-default {
> +					st,pins {
> +						sda = <&PIO10 6 ALT2 BIDIR>;
> +						scl = <&PIO10 5 ALT2 BIDIR>;
> +					};
> +				};
> +			};
> +
> +			i2c1 {
> +				pinctrl_i2c1_default: i2c1-default {
> +					st,pins {
> +						sda = <&PIO11 1 ALT2 BIDIR>;
> +						scl = <&PIO11 0 ALT2 BIDIR>;
> +					};
> +				};
> +			};
> +
> +			i2c2 {
> +				pinctrl_i2c2_default: i2c2-default {
> +					st,pins {
> +						sda = <&PIO15 6 ALT2 BIDIR>;
> +						scl = <&PIO15 5 ALT2 BIDIR>;
> +					};
> +				};
> +			};
> +
> +			i2c3 {
> +				pinctrl_i2c3_default: i2c3-default {
> +					st,pins {
> +						sda = <&PIO18 6 ALT1 BIDIR>;
> +						scl = <&PIO18 5 ALT1 BIDIR>;
> +					};
> +				};
> +			};
> +
> +			spi0 {
> +				pinctrl_spi0_default: spi0-default {
> +					st,pins {
> +						mtsr = <&PIO12 6 ALT2 BIDIR>;
> +						mrst = <&PIO12 7 ALT2 BIDIR>;
> +						scl = <&PIO12 5 ALT2 BIDIR>;
> +					};
> +				};
> +			};
> +		};
> +
> +		pin-controller-front1 {
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			compatible = "st,stih407-front-pinctrl";
> +			st,syscfg = <&syscfg_front>;
> +			reg = <0x0921f080 0x4>;
> +			reg-names = "irqmux";
> +			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
> +			interrupts-names = "irqmux";
> +			ranges = <0 0x09210000 0x10000>;
> +
> +			PIO20: PIO at 09210000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x0 0x100>;
> +				st,bank-name = "PIO20";
> +			};
> +		};
> +
> +		pin-controller-rear {
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			compatible = "st,stih407-rear-pinctrl";
> +			st,syscfg = <&syscfg_rear>;
> +			reg = <0x0922f080 0x4>;
> +			reg-names = "irqmux";
> +			interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
> +			interrupts-names = "irqmux";
> +			ranges = <0 0x09220000 0x6000>;
> +
> +			PIO30: gpio at 09220000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x0 0x100>;
> +				st,bank-name = "PIO30";
> +			};
> +			PIO31: gpio at 09221000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x1000 0x100>;
> +				st,bank-name = "PIO31";
> +			};
> +			PIO32: gpio at 09222000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x2000 0x100>;
> +				st,bank-name = "PIO32";
> +			};
> +			PIO33: gpio at 09223000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x3000 0x100>;
> +				st,bank-name = "PIO33";
> +			};
> +			PIO34: gpio at 09224000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x4000 0x100>;
> +				st,bank-name = "PIO34";
> +			};
> +			PIO35: gpio at 09225000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x5000 0x100>;
> +				st,bank-name = "PIO35";
> +			};
> +
> +			i2c4 {
> +				pinctrl_i2c4_default: i2c4-default {
> +					st,pins {
> +						sda = <&PIO30 1 ALT1 BIDIR>;
> +						scl = <&PIO30 0 ALT1 BIDIR>;
> +					};
> +				};
> +			};
> +
> +			i2c5 {
> +				pinctrl_i2c5_default: i2c5-default {
> +					st,pins {
> +						sda = <&PIO34 4 ALT1 BIDIR>;
> +						scl = <&PIO34 3 ALT1 BIDIR>;
> +					};
> +				};
> +			};
> +
> +			usb3 {
> +				pinctrl_usb3: usb3-2 {
> +					st,pins {
> +						usb-oc-detect = <&PIO35 4 ALT1 IN>;
> +						usb-pwr-enable = <&PIO35 5 ALT1 OUT>;
> +						usb-vbus-valid = <&PIO35 6 ALT1 IN>;
> +					};
> +				};
> +			};
> +
> +			pwm0 {
> +				pinctrl_pwm0_chan0_default: pwm0-0-default {
> +					st,pins {
> +						pwm-out = <&PIO31 1 ALT1 OUT>;
> +					};
> +				};
> +			};
> +		};
> +
> +		pin-controller-flash {
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			compatible = "st,stih407-flash-pinctrl";
> +			st,syscfg = <&syscfg_flash>;
> +			reg = <0x0923f080 0x4>;
> +			reg-names = "irqmux";
> +			interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
> +			interrupts-names = "irqmux";
> +			ranges = <0 0x09230000 0x3000>;
> +
> +			PIO40: gpio at 09230000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0 0x100>;
> +				st,bank-name = "PIO40";
> +			};
> +			PIO41: gpio at 09231000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x1000 0x100>;
> +				st,bank-name = "PIO41";
> +			};
> +			PIO42: gpio at 09232000 {
> +				gpio-controller;
> +				#gpio-cells = <1>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				reg = <0x2000 0x100>;
> +				st,bank-name = "PIO42";
> +			};
> +
> +			mmc0 {
> +				pinctrl_mmc0: mmc0-0 {
> +					st,pins {
> +						emmc_clk = <&PIO40 6 ALT1 BIDIR>;
> +						emmc_cmd = <&PIO40 7 ALT1 BIDIR_PU>;
> +						emmc_d0 = <&PIO41 0 ALT1 BIDIR_PU>;
> +						emmc_d1 = <&PIO41 1 ALT1 BIDIR_PU>;
> +						emmc_d2 = <&PIO41 2 ALT1 BIDIR_PU>;
> +						emmc_d3 = <&PIO41 3 ALT1 BIDIR_PU>;
> +						emmc_d4 = <&PIO41 4 ALT1 BIDIR_PU>;
> +						emmc_d5 = <&PIO41 5 ALT1 BIDIR_PU>;
> +						emmc_d6 = <&PIO41 6 ALT1 BIDIR_PU>;
> +						emmc_d7 = <&PIO41 7 ALT1 BIDIR_PU>;
> +					};
> +				};
> +			};
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
> new file mode 100644
> index 0000000..b14a377
> --- /dev/null
> +++ b/arch/arm/boot/dts/stih407.dtsi
> @@ -0,0 +1,263 @@
> +/*
> + * Copyright (C) 2014 STMicroelectronics Limited.
> + * Author: Giuseppe Cavallaro <peppe.cavallaro at st.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * publishhed by the Free Software Foundation.
> + */
> +#include "stih407-clock.dtsi"
> +#include "stih407-pinctrl.dtsi"
> +/ {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		cpu at 0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a9";
> +			reg = <0>;
> +		};
> +		cpu at 1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a9";
> +			reg = <1>;
> +		};
> +	};
> +
> +	intc: interrupt-controller at 08761000 {
> +		compatible = "arm,cortex-a9-gic";
> +		#interrupt-cells = <3>;
> +		interrupt-controller;
> +		reg = <0x08761000 0x1000>, <0x08760100 0x100>;
> +	};
> +
> +	scu at 08760000 {
> +		compatible = "arm,cortex-a9-scu";
> +		reg = <0x08760000 0x1000>;
> +	};
> +
> +	timer at 08760200 {
> +		interrupt-parent = <&intc>;
> +		compatible = "arm,cortex-a9-global-timer";
> +		reg = <0x08760200 0x100>;
> +		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&arm_periph_clk>;
> +	};
> +
> +	L2: cache-controller {
> +		compatible = "arm,pl310-cache";
> +		reg = <0x08762000 0x1000>;
> +		arm,data-latency = <3 3 3>;
> +		arm,tag-latency = <2 2 2>;
> +		cache-unified;
> +		cache-level = <2>;
> +	};
> +
> +	soc {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		interrupt-parent = <&intc>;
> +		ranges;
> +		compatible = "simple-bus";
> +
> +		syscfg_sbc: sbc-syscfg at 9620000 {
> +			compatible = "st,stih407-sbc-syscfg", "syscon";
> +			reg = <0x9620000 0x1000>;
> +		};
> +
> +		syscfg_front: front-syscfg at 9280000 {
> +			compatible = "st,stih407-front-syscfg", "syscon";
> +			reg = <0x9280000 0x1000>;
> +		};
> +
> +		syscfg_rear: rear-syscfg at 9290000 {
> +			compatible = "st,stih407-rear-syscfg", "syscon";
> +			reg = <0x9290000 0x1000>;
> +		};
> +
> +		syscfg_flash: flash-syscfg at 92a0000 {
> +			compatible = "st,stih407-flash-syscfg", "syscon";
> +			reg = <0x92a0000 0x1000>;
> +		};
> +
> +		syscfg_sbc_reg: fvdp-lite-syscfg at 9600000 {
> +			compatible = "st,stih407-sbc-reg-syscfg", "syscon";
> +			reg = <0x9600000 0x1000>;
> +		};
> +
> +		syscfg_core: core-syscfg at 92b0000 {
> +			compatible = "st,stih407-core-syscfg", "syscon";
> +			reg = <0x92b0000 0x1000>;
> +		};
> +
> +		syscfg_lpm: lpm-syscfg at 94b5100 {
> +			compatible = "st,stih407-lpm-syscfg", "syscon";
> +			reg = <0x94b5100 0x1000>;
> +		};
> +
> +		serial at 9830000 {
> +			compatible = "st,asc";
> +			reg = <0x9830000 0x2c>;
> +			interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_serial0>;
> +			clocks = <&CLK_EXT2F_A9>;
> +
> +			status = "disabled";
> +		};
> +
> +		serial at 9831000 {
> +			compatible = "st,asc";
> +			reg = <0x9831000 0x2c>;
> +			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_serial1>;
> +			clocks = <&CLK_EXT2F_A9>;
> +
> +			status = "disabled";
> +		};
> +
> +		serial at 9832000 {
> +			compatible = "st,asc";
> +			reg = <0x9832000 0x2c>;
> +			interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_serial2>;
> +			clocks = <&CLK_EXT2F_A9>;
> +
> +			status = "disabled";
> +		};
> +
> +		/* SBC_ASC0 - UART10 */
> +		sbc_serial0: serial at 9530000 {
> +			compatible = "st,asc";
> +			reg = <0x9530000 0x2c>;
> +			interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_sbc_serial0>;
> +			clocks = <&CLK_SYSIN>;
> +
> +			status = "disabled";
> +		};
> +
> +		serial at 9531000 {
> +			compatible = "st,asc";
> +			reg = <0x9531000 0x2c>;
> +			interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_sbc_serial1>;
> +			clocks = <&CLK_SYSIN>;
> +
> +			status = "disabled";
> +		};
> +
> +		i2c at 9840000 {
> +			compatible = "st,comms-ssc4-i2c";
> +			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> +			reg = <0x9840000 0x110>;
> +			clocks = <&CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +			clock-frequency = <400000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_i2c0_default>;
> +
> +			status = "disabled";
> +		};
> +
> +		i2c at 9841000 {
> +			compatible = "st,comms-ssc4-i2c";
> +			reg = <0x9841000 0x110>;
> +			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +			clock-frequency = <400000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_i2c1_default>;
> +
> +			status = "disabled";
> +		};
> +
> +		i2c at 9842000 {
> +			compatible = "st,comms-ssc4-i2c";
> +			reg = <0x9842000 0x110>;
> +			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +			clock-frequency = <400000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_i2c2_default>;
> +
> +			status = "disabled";
> +		};
> +
> +		i2c at 9843000 {
> +			compatible = "st,comms-ssc4-i2c";
> +			reg = <0x9843000 0x110>;
> +			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +			clock-frequency = <400000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_i2c3_default>;
> +
> +			status = "disabled";
> +		};
> +
> +		i2c at 9844000 {
> +			compatible = "st,comms-ssc4-i2c";
> +			reg = <0x9844000 0x110>;
> +			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +			clock-frequency = <400000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_i2c4_default>;
> +
> +			status = "disabled";
> +		};
> +
> +		i2c at 9845000 {
> +			compatible = "st,comms-ssc4-i2c";
> +			reg = <0x9845000 0x110>;
> +			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +			clock-frequency = <400000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_i2c5_default>;
> +
> +			status = "disabled";
> +		};
> +
> +
> +		/* SSCs on SBC */
> +		i2c at 9540000 {
> +			compatible = "st,comms-ssc4-i2c";
> +			reg = <0x9540000 0x110>;
> +			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&CLK_SYSIN>;
> +			clock-names = "ssc";
> +			clock-frequency = <400000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_i2c10_default>;
> +
> +			status = "disabled";
> +		};
> +
> +		i2c at 9541000 {
> +			compatible = "st,comms-ssc4-i2c";
> +			reg = <0x9541000 0x110>;
> +			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&CLK_SYSIN>;
> +			clock-names = "ssc";
> +			clock-frequency = <400000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_i2c11_default>;
> +
> +			status = "disabled";
> +		};
> +	};
> +};
Acked-by: Patrice Chotard <patrice.chotard at st.com>





More information about the linux-arm-kernel mailing list