[PATCH v3 6/6] ARM: EXYNOS: Refactoring to remove soc_is_exynos macros from exynos
Olof Johansson
olof at lixom.net
Sun May 11 00:10:08 PDT 2014
On Sat, May 10, 2014 at 12:18 AM, <y at samsung.com> wrote:
> From: Pankaj Dubey <pankaj.dubey at samsung.com>
>
> This patch enables chipid driver for ARCH_EXYNOS and refactors
> machine code as well as exynos cpufreq driver code for using
> chipid driver for identification of SoC ID and SoC rev.
>
> This patch also updates DT binding information in exynos4 and
> exynos5 dtsi file. As to differentiate product id bit-mask we need
> separate compatible string for exynos4 and exynos5. Hoping this will
> be helpful in future as bit-mask and bit-shift bit may differ.
> Added binding information as well.
>
> Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
> ---
> .../bindings/arm/samsung/exynos-chipid.txt | 21 ++++++++
> arch/arm/Kconfig | 1 +
> arch/arm/boot/dts/exynos4.dtsi | 2 +-
> arch/arm/boot/dts/exynos5.dtsi | 2 +-
> arch/arm/mach-exynos/exynos.c | 47 ++++------------
> arch/arm/mach-exynos/platsmp.c | 11 ++--
> arch/arm/mach-exynos/pm.c | 26 ++++-----
> arch/arm/plat-samsung/include/plat/cpu.h | 57 --------------------
> drivers/clk/samsung/clk-exynos4.c | 2 +-
> drivers/cpufreq/exynos-cpufreq.c | 9 ++--
> drivers/cpufreq/exynos-cpufreq.h | 1 -
> drivers/cpufreq/exynos4x12-cpufreq.c | 5 +-
> 12 files changed, 61 insertions(+), 123 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt
> new file mode 100644
> index 0000000..a496459
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.txt
> @@ -0,0 +1,21 @@
> +SAMSUNG Exynos4/Exynos5 SoCs Chipid driver.
> +
> +Required properties:
> +- compatible : Should at least contain "samsung,exynos4210-chipid". More
> + specific compatible string specify which SoC version (exynos4 or
> + exynos5) are paired with.
> + Details:
> + samsung,exynos4-chipid: Exynos4 SoCs has Chip ID block that can provide
> + product id, revision number and package information.
> + It has different product-id bit-mask than Exynos5 series SoC.
> + samsung,exynos5-chipid: Exynos5 SoCs has Chip ID block that can provide
> + product id, revision number and package information.
> + It has different product-id bit-mask then Exynos4 series SoC.
> +
> +- reg: offset and length of the register set
> +
> +Example:
> + chipid at 10000000 {
> + compatible = "samsung,exynos4210-chipid", "samsung,exynos4-chipid";
> + reg = <0x10000000 0x100>;
> + };
This needs to go with the patch adding the driver.
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index a4eac2f..06f14a4 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -856,6 +856,7 @@ config ARCH_EXYNOS
> select SRAM
> select USE_OF
> select MFD_SYSCON
> + select EXYNOS_CHIPID
> help
> Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
>
> diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> index 2f8bcd0..d4c0657 100644
> --- a/arch/arm/boot/dts/exynos4.dtsi
> +++ b/arch/arm/boot/dts/exynos4.dtsi
> @@ -46,7 +46,7 @@
> };
>
> chipid at 10000000 {
> - compatible = "samsung,exynos4210-chipid";
> + compatible = "samsung,exynos4210-chipid", "samsung,exynos4-chipid";
Only 4210-chipid. We normally don't use generic names on any drivers
(we might on system level, but not on drivers).
> reg = <0x10000000 0x100>;
> };
>
> diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
> index 3027e37..1d0b569 100644
> --- a/arch/arm/boot/dts/exynos5.dtsi
> +++ b/arch/arm/boot/dts/exynos5.dtsi
> @@ -19,7 +19,7 @@
> interrupt-parent = <&gic>;
>
> chipid at 10000000 {
> - compatible = "samsung,exynos4210-chipid";
> + compatible = "samsung,exynos4210-chipid", "samsung,exynos5-chipid";
Same here. Each SoC should probably have:
samsung,exynos<soc>-chipid, samsung,exynos4210-chipid
At least if you think there will ever be a difference in how the
driver has to work when interacting with this IP block compared to
4210.
> reg = <0x10000000 0x100>;
> };
>
> diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
> index 9902e52..26f5e8c 100644
> --- a/arch/arm/mach-exynos/exynos.c
> +++ b/arch/arm/mach-exynos/exynos.c
> @@ -21,6 +21,7 @@
> #include <linux/pm_domain.h>
> #include <linux/mfd/syscon.h>
> #include <linux/regmap.h>
> +#include <linux/exynos-soc.h>
>
> #include <asm/cacheflush.h>
> #include <asm/hardware/cache-l2x0.h>
> @@ -28,7 +29,6 @@
> #include <asm/mach/map.h>
> #include <asm/memory.h>
>
> -#include <plat/cpu.h>
> #include <mach/map.h>
>
> #include "common.h"
> @@ -171,29 +171,6 @@ static void __init exynos_init_late(void)
> exynos_pm_init();
> }
>
> -static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
> - int depth, void *data)
> -{
> - struct map_desc iodesc;
> - __be32 *reg;
> - unsigned long len;
> -
> - if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") &&
> - !of_flat_dt_is_compatible(node, "samsung,exynos5440-clock"))
> - return 0;
> -
> - reg = of_get_flat_dt_prop(node, "reg", &len);
> - if (reg == NULL || len != (sizeof(unsigned long) * 2))
> - return 0;
> -
> - iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0]));
> - iodesc.length = be32_to_cpu(reg[1]) - 1;
> - iodesc.virtual = (unsigned long)S5P_VA_CHIPID;
> - iodesc.type = MT_DEVICE;
> - iotable_init(&iodesc, 1);
> - return 1;
> -}
> -
> static const struct of_device_id exynos_dt_pmu_match[] = {
> { .compatible = "samsung,exynos4210-pmu" },
> { .compatible = "samsung,exynos4212-pmu" },
> @@ -202,25 +179,15 @@ static const struct of_device_id exynos_dt_pmu_match[] = {
> {},
> };
>
> -static void __init exynos_init_io(void)
> -{
> - debug_ll_io_init();
> -
> - of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
> -
> - /* detect cpu id and rev. */
> - s5p_init_cpu(S5P_VA_CHIPID);
> -}
> -
> static void __init exynos5_init_io(void)
> {
> - exynos_init_io();
> + debug_ll_io_init();
> iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
> }
>
> static void __init exynos4_init_io(void)
> {
> - exynos_init_io();
> + debug_ll_io_init();
> iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
> }
>
> @@ -279,14 +246,18 @@ void __init exynos_map_pmu(void)
>
> static void __init exynos_dt_machine_init(void)
> {
> + struct device *parent;
> +
> exynos_map_pmu();
>
> - if (!soc_is_exynos5440())
> + parent = exynos_soc_device_init();
> +
> + if (is_soc_id_compatible(EXYNOS5440))
> platform_device_register(&exynos_cpuidle);
>
> platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
>
> - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
> }
>
> static char const *exynos4_dt_compat[] __initconst = {
> diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
> index d0482c2..9d6ec84 100644
> --- a/arch/arm/mach-exynos/platsmp.c
> +++ b/arch/arm/mach-exynos/platsmp.c
> @@ -20,13 +20,13 @@
> #include <linux/smp.h>
> #include <linux/io.h>
> #include <linux/of_address.h>
> +#include <linux/exynos-soc.h>
>
> #include <asm/cacheflush.h>
> #include <asm/smp_plat.h>
> #include <asm/smp_scu.h>
> #include <asm/firmware.h>
>
> -#include <plat/cpu.h>
> #include <mach/map.h>
>
> #include "common.h"
> @@ -59,7 +59,8 @@ static void __init exynos_smp_prepare_sram(void)
>
> static inline void __iomem *cpu_boot_reg_base(void)
> {
> - if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
> + if (is_soc_id_compatible(EXYNOS4210) &&
> + is_soc_rev_compatible(EXYNOS4210_REV_1_1))
> return pmu_base + S5P_INFORM5;
>
> return sram_base_addr;
> @@ -72,9 +73,10 @@ static inline void __iomem *cpu_boot_reg(int cpu)
> boot_reg = cpu_boot_reg_base();
> if (!boot_reg)
> return ERR_PTR(-ENODEV);
> - if (soc_is_exynos4412())
> +
> + if (is_soc_id_compatible(EXYNOS4412))
> boot_reg += 4*cpu;
> - else if (soc_is_exynos5420())
> + else if (is_soc_id_compatible(EXYNOS5420))
> boot_reg += 4;
This won't work much longer. You'll need to add another check for any
other SoC that has another register layout. This is probably one of
these cases where it makes more sense to describe the register
offset/layout in the DT.
> return boot_reg;
> }
> @@ -264,6 +266,7 @@ static void __init exynos_smp_init_cpus(void)
> static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
> {
> int i;
> + early_exynos_chipid_init();
>
> pmu_base = pmu_base_addr();
>
> diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
> index 59e5604..5cb5449 100644
> --- a/arch/arm/mach-exynos/pm.c
> +++ b/arch/arm/mach-exynos/pm.c
> @@ -22,13 +22,13 @@
> #include <linux/err.h>
> #include <linux/clk.h>
> #include <linux/regmap.h>
> +#include <linux/exynos-soc.h>
>
> #include <asm/cacheflush.h>
> #include <asm/hardware/cache-l2x0.h>
> #include <asm/smp_scu.h>
> #include <asm/suspend.h>
>
> -#include <plat/cpu.h>
> #include <plat/pm-common.h>
> #include <plat/pll.h>
> #include <plat/regs-srom.h>
> @@ -82,7 +82,7 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
> {
> const struct exynos_wkup_irq *wkup_irq;
>
> - if (soc_is_exynos5250())
> + if (is_soc_id_compatible(EXYNOS5250))
> wkup_irq = exynos5250_wkup_irq;
> else
> wkup_irq = exynos4_wkup_irq;
> @@ -101,11 +101,11 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
> return -ENOENT;
> }
>
> -#define EXYNOS_BOOT_VECTOR_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \
> - S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
> +#define EXYNOS_BOOT_VECTOR_ADDR (is_soc_rev_compatible(EXYNOS4210_REV_1_1) ? \
> + S5P_INFORM7 : (is_soc_rev_compatible(EXYNOS4210_REV_1_0) ? \
> 0x24 : S5P_INFORM0))
> -#define EXYNOS_BOOT_VECTOR_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
> - S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
> +#define EXYNOS_BOOT_VECTOR_FLAG (is_soc_rev_compatible(EXYNOS4210_REV_1_1) ? \
> + S5P_INFORM6 : (is_soc_rev_compatible(EXYNOS4210_REV_1_0) ? \
> 0x20 : S5P_INFORM1))
>
> #define S5P_CHECK_AFTR 0xFCBA0D10
> @@ -119,7 +119,7 @@ static void exynos_set_wakeupmask(long mask)
>
> static void exynos_cpu_set_boot_vector(long flags)
> {
> - if (samsung_rev() == EXYNOS4210_REV_1_0) {
> + if (is_soc_rev_compatible(EXYNOS4210_REV_1_0)) {
> __raw_writel(virt_to_phys(exynos_cpu_resume),
> S5P_VA_SYSRAM + EXYNOS_BOOT_VECTOR_ADDR);
> __raw_writel(flags, S5P_VA_SYSRAM + EXYNOS_BOOT_VECTOR_FLAG);
> @@ -183,7 +183,7 @@ static int exynos_cpu_suspend(unsigned long arg)
> outer_flush_all();
> #endif
>
> - if (soc_is_exynos5250())
> + if (is_soc_id_compatible(EXYNOS5250))
> flush_cache_all();
>
> /* issue the standby signal into the pm unit. */
> @@ -205,7 +205,7 @@ static void exynos_pm_prepare(void)
>
> s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
>
> - if (soc_is_exynos5250()) {
> + if (is_soc_id_compatible(EXYNOS5250)) {
> /* Disable USE_RETENTION of JPEG_MEM_OPTION */
> regmap_read(pmu_regmap, EXYNOS5_JPEG_MEM_OPTION, &tmp);
> tmp &= ~EXYNOS5_OPTION_USE_RETENTION;
> @@ -243,7 +243,7 @@ static int exynos_pm_suspend(void)
> tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
> regmap_write(pmu_regmap, S5P_CENTRAL_SEQ_OPTION, tmp);
>
> - if (!soc_is_exynos5250())
> + if (!is_soc_id_compatible(EXYNOS5250))
> exynos_cpu_save_register();
These kind of constructs don't work well, you will have to address
them too. I know there'll be need for code here for 5420/5422 already,
for example.
> diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
> index b4f9672..7b0ea1f 100644
> --- a/drivers/clk/samsung/clk-exynos4.c
> +++ b/drivers/clk/samsung/clk-exynos4.c
> @@ -1030,7 +1030,7 @@ static unsigned long exynos4_get_xom(void)
> void __iomem *chipid_base;
> struct device_node *np;
>
> - np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-chipid");
> + np = of_find_compatible_node(NULL, NULL, "samsung,exynos4-chipid");
This should likely still say 4210.
> if (np) {
> chipid_base = of_iomap(np, 0);
>
> diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
> index f99cfe2..5fe84a1 100644
> --- a/drivers/cpufreq/exynos-cpufreq.c
> +++ b/drivers/cpufreq/exynos-cpufreq.c
> @@ -17,8 +17,7 @@
> #include <linux/regulator/consumer.h>
> #include <linux/cpufreq.h>
> #include <linux/platform_device.h>
> -
> -#include <plat/cpu.h>
> +#include <linux/exynos-soc.h>
>
> #include "exynos-cpufreq.h"
>
> @@ -163,11 +162,11 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
> if (!exynos_info)
> return -ENOMEM;
>
> - if (soc_is_exynos4210())
> + if (is_soc_id_compatible(EXYNOS4210))
> ret = exynos4210_cpufreq_init(exynos_info);
> - else if (soc_is_exynos4212() || soc_is_exynos4412())
> + else if (is_soc_id_compatible(EXYNOS4212) || is_soc_id_compatible(EXYNOS4412))
> ret = exynos4x12_cpufreq_init(exynos_info);
> - else if (soc_is_exynos5250())
> + else if (is_soc_id_compatible(EXYNOS5250))
> ret = exynos5250_cpufreq_init(exynos_info);
Many drivers tend to use of_machine_is_compatible here. I wonder if
that'll solve most of your problems in a more generic way. Any machine
based on an SoC should have the SoC somewhere in the compatible array
for the board anyway.
Actually, I think using that approach in most of your patch set will
remove the need for the chipid driver alltogether, and just using
machine compatibles instead.
-Olof
More information about the linux-arm-kernel
mailing list