[PATCH v3 3/6] ARM: EXYNOS: Remove soc_is_exynos4/5 from exynos.c

[Olof Johansson]

On Sat, May 10, 2014 at 12:18 AM,  <y at samsung.com> wrote:
> From: Pankaj Dubey <pankaj.dubey at samsung.com>
>
> This patch removes usage of soc_is_exynos4/5 from exynos.c.
> For this we need to separate machine descriptors for exynos4
> and exynos5. While doing this patch does some consolidation also.
>
> CC: Russell King <linux at arm.linux.org.uk>
> CC: Thomas Abraham <thomas.abraham at linaro.org>
> Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
> ---
>  arch/arm/mach-exynos/exynos.c            |   52 +++++++++++++++++++-----------
>  arch/arm/plat-samsung/include/plat/cpu.h |    3 --
>  2 files changed, 33 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
> index 09063ee..9902e52 100644
> --- a/arch/arm/mach-exynos/exynos.c
> +++ b/arch/arm/mach-exynos/exynos.c
> @@ -202,20 +202,6 @@ static const struct of_device_id exynos_dt_pmu_match[] = {
>         {},
>  };
>
> -/*
> - * exynos_map_io
> - *
> - * register the standard cpu IO areas
> - */
> -static void __init exynos_map_io(void)
> -{
> -       if (soc_is_exynos4())
> -               iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
> -
> -       if (soc_is_exynos5())
> -               iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
> -}
> -
>  static void __init exynos_init_io(void)
>  {
>         debug_ll_io_init();
> @@ -224,8 +210,18 @@ static void __init exynos_init_io(void)
>
>         /* detect cpu id and rev. */
>         s5p_init_cpu(S5P_VA_CHIPID);
> +}
> +
> +static void __init exynos5_init_io(void)
> +{
> +       exynos_init_io();
> +       iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
> +}
>
> -       exynos_map_io();
> +static void __init exynos4_init_io(void)
> +{
> +       exynos_init_io();
> +       iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
>  }
>
>  struct bus_type exynos_subsys = {
> @@ -293,11 +289,15 @@ static void __init exynos_dt_machine_init(void)
>         of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
>  }
>
> -static char const *exynos_dt_compat[] __initconst = {
> +static char const *exynos4_dt_compat[] __initconst = {
>         "samsung,exynos4",
>         "samsung,exynos4210",
>         "samsung,exynos4212",
>         "samsung,exynos4412",
> +       NULL
> +};
> +
> +static char const *exynos5_dt_compat[] __initconst = {
>         "samsung,exynos5",
>         "samsung,exynos5250",
>         "samsung,exynos5420",
> @@ -321,15 +321,29 @@ static void __init exynos_reserve(void)
>  #endif
>  }
>
> -DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
> +DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")

SAMSUNG EXYNOS5

> +       /* Maintainer: Thomas Abraham <thomas.abraham at linaro.org> */
> +       /* Maintainer: Kukjin Kim <kgene.kim at samsung.com> */
> +       .smp            = smp_ops(exynos_smp_ops),
> +       .map_io         = exynos5_init_io,
> +       .init_early     = exynos_firmware_init,
> +       .init_machine   = exynos_dt_machine_init,
> +       .init_late      = exynos_init_late,
> +       .dt_compat      = exynos5_dt_compat,
> +       .restart        = exynos_restart,
> +       .reserve        = exynos_reserve,
> +MACHINE_END
> +
> +
> +DT_MACHINE_START(EXYNOS4_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")

SAMSUNG EXYNOS4

... so you can tell the difference if you for some reason probed with
the wrong one.

Also, you should order these with 4 before 5.


-Olof