[Patch v2] pinctrl: msm: Add more MSM8X74 pin definitions

[Bjorn Andersson]

On Fri 09 May 10:52 PDT 2014, Andy Gross wrote:

> This patch adds pin definitiones for the MSM8x74 TLMM.  New definitions
> include:
> 
> BLSP devices (I2C, UART, UART flow control, SPI, and UIM), mi2s, gp clk, pdm,
> gcc clk, cci_timer, cci_i2c, cam_clk, hsic, tsif, sdc3, sdc4, and other assorted
> pins.
> 
> Signed-off-by: Andy Gross <agross at codeaurora.org>

Awesome stuff, only have some minor comments.

> +       MSM_MUX_blsp_uart1,
> +       MSM_MUX_blsp_uart1_flow,
[...]
> +static const char * const blsp_uim1_groups[] = { "gpio0", "gpio1" };
> +static const char * const blsp_uart1_flow_groups[] = { "gpio2", "gpio3" };

You don't need to separate uart and flow control into two different functions
here.  If you have gpio0-gpio3 in a group named uart1 both of the following
snippets are valid:

uart1 {
	pins = "gpio0", "gpio1";
	function = "uart1";
};

uart1 {
	pins = "gpio0", "gpio1", "gpio2", "gpio3";
	function = "uart1";
};

This is how I had to handle gsbis in family a, where a gsbi is pairs of pins
with different configurations.

[...]
> +static const char * const hdmi_cec_groups[] = { "gpio31" };
> +static const char * const hdmi_ddc_groups[] = { "gpio32", "gpio33" };
> +static const char * const hdmi_hpd_groups[] = { "gpio34" };

As with the uart vs uart_flow you could group these as "hdmi", but maybe not as
useful.

[...]
> +       PINGROUP(35,  NA, sdc3, NA, NA, NA, NA, NA),
> +       PINGROUP(36,  NA, sdc3, NA, NA, NA, NA, NA),
> +       PINGROUP(37,  NA, sdc3, NA, NA, NA, NA, NA),
> +       PINGROUP(38,  NA, sdc3, NA, NA, NA, NA, NA),
> +       PINGROUP(39,  NA, sdc3, NA, NA, NA, NA, NA),
> +       PINGROUP(40,  NA, sdc3, NA, NA, NA, NA, NA),
> +       PINGROUP(41,  NA, blsp_spi7, blsp_uart7, blsp_uim7, NA, NA, NA),
> +       PINGROUP(42,  NA, blsp_spi7, blsp_uart7, blsp_uim7, NA, NA, NA),
> +       PINGROUP(43,  NA, blsp_spi7, blsp_uart7_flow, blsp_i2c7, NA, NA, NA),
> +       PINGROUP(44,  NA, blsp_spi7, blsp_uart7_flow, blsp_i2c7, NA, NA, NA),

I was expecting wcnss, bt and fm as function 1 for pins 35-44. Adding those and
I think we have everything we use in our devices.

[...]
> +       PINGROUP(72,  NA, spkr_mi2s, NA, NA, NA, NA, NA),

spkr_mi2s is function 1 for pin 72.

Regards,
Bjorn