[PATCH v3 02/19] arm64: initial support for GICv3
Christoffer Dall
christoffer.dall at linaro.org
Fri May 9 07:05:22 PDT 2014
On Wed, Apr 16, 2014 at 02:39:34PM +0100, Marc Zyngier wrote:
> The Generic Interrupt Controller (version 3) offers services that are
> similar to GICv2, with a number of additional features:
> - Affinity routing based on the CPU MPIDR (ARE)
> - System register for the CPU interfaces (SRE)
> - Support for more that 8 CPUs
> - Locality-specific Peripheral Interrupts (LPIs)
> - Interrupt Translation Services (ITS)
>
> This patch adds preliminary support for GICv3 with ARE and SRE,
> non-secure mode only. It relies on higher exception levels to grant ARE
> and SRE access.
>
> Support for LPI and ITS will be added at a later time.
>
> Cc: Thomas Gleixner <tglx at linutronix.de>
> Reviewed-by: Zi Shen Lim <zlim at broadcom.com>
> Acked-by: Catalin Marinas <catalin.marinas at arm.com>
> Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
> ---
> arch/arm64/Kconfig | 1 +
> arch/arm64/kernel/head.S | 18 +
> arch/arm64/kernel/hyp-stub.S | 1 +
> drivers/irqchip/Kconfig | 5 +
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-gic-v3.c | 681 +++++++++++++++++++++++++++++++++++++
> include/linux/irqchip/arm-gic-v3.h | 188 ++++++++++
> 7 files changed, 895 insertions(+)
> create mode 100644 drivers/irqchip/irq-gic-v3.c
> create mode 100644 include/linux/irqchip/arm-gic-v3.h
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 27bbcfc..5bd0dfe 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -9,6 +9,7 @@ config ARM64
> select ARM_AMBA
> select ARM_ARCH_TIMER
> select ARM_GIC
> + select ARM_GIC_V3
> select BUILDTIME_EXTABLE_SORT
> select CLONE_BACKWARDS
> select COMMON_CLK
> diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
> index 0b281ff..7c56e93 100644
> --- a/arch/arm64/kernel/head.S
> +++ b/arch/arm64/kernel/head.S
> @@ -22,6 +22,7 @@
>
> #include <linux/linkage.h>
> #include <linux/init.h>
> +#include <linux/irqchip/arm-gic-v3.h>
>
> #include <asm/assembler.h>
> #include <asm/ptrace.h>
> @@ -183,6 +184,23 @@ CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1
> msr cnthctl_el2, x0
> msr cntvoff_el2, xzr // Clear virtual offset
>
> +#ifdef CONFIG_ARM_GIC_V3
> + /* GICv3 system register access */
> + mrs x0, id_aa64pfr0_el1
> + ubfx x0, x0, #24, #4
> + cmp x0, #1
> + b.ne 3f
> +
> + mrs x0, ICC_SRE_EL2
> + orr x0, x0, #1 // Set ICC_SRE_EL2.SRE==1
> + orr x0, x0, #(1 << 3) // Set ICC_SRE_EL2.Enable==1
> + msr ICC_SRE_EL2, x0
> + isb // Make sure SRE is now 1
> + msr ICH_HCR_EL2, xzr // Reset ICC_HCR_EL2 to defaults
> +
> +3:
> +#endif
> +
> /* Populate ID registers. */
> mrs x0, midr_el1
> mrs x1, mpidr_el1
> diff --git a/arch/arm64/kernel/hyp-stub.S b/arch/arm64/kernel/hyp-stub.S
> index 0959611..a272f33 100644
> --- a/arch/arm64/kernel/hyp-stub.S
> +++ b/arch/arm64/kernel/hyp-stub.S
> @@ -19,6 +19,7 @@
>
> #include <linux/init.h>
> #include <linux/linkage.h>
> +#include <linux/irqchip/arm-gic-v3.h>
>
> #include <asm/assembler.h>
> #include <asm/ptrace.h>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 61ffdca..5b55c46 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -10,6 +10,11 @@ config ARM_GIC
> config GIC_NON_BANKED
> bool
>
> +config ARM_GIC_V3
> + bool
> + select IRQ_DOMAIN
> + select MULTI_IRQ_HANDLER
> +
> config ARM_NVIC
> bool
> select IRQ_DOMAIN
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 22e616c..4adfda8 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_ORION_IRQCHIP) += irq-orion.o
> obj-$(CONFIG_ARCH_SUNXI) += irq-sun4i.o
> obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
> obj-$(CONFIG_ARM_GIC) += irq-gic.o irq-gic-common.o
> +obj-$(CONFIG_ARM_GIC_V3) += irq-gic-v3.o irq-gic-common.o
> obj-$(CONFIG_ARM_NVIC) += irq-nvic.o
> obj-$(CONFIG_ARM_VIC) += irq-vic.o
> obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc.o
> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
> new file mode 100644
> index 0000000..b4c8140
> --- /dev/null
> +++ b/drivers/irqchip/irq-gic-v3.c
> @@ -0,0 +1,681 @@
> +/*
> + * Copyright (C) 2013, 2014 ARM Limited, All Rights Reserved.
> + * Author: Marc Zyngier <marc.zyngier at arm.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/cpu.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/percpu.h>
> +#include <linux/slab.h>
> +
> +#include <linux/irqchip/arm-gic-v3.h>
> +
> +#include <asm/cputype.h>
> +#include <asm/exception.h>
> +#include <asm/smp_plat.h>
> +
> +#include "irq-gic-common.h"
> +#include "irqchip.h"
> +
> +struct gic_chip_data {
> + void __iomem *dist_base;
> + void __iomem **redist_base;
> + void __percpu __iomem **rdist;
> + struct irq_domain *domain;
> + u64 redist_stride;
> + u32 redist_regions;
> + unsigned int irq_nr;
> +};
> +
> +static struct gic_chip_data gic_data __read_mostly;
> +
> +#define gic_data_rdist() (this_cpu_ptr(gic_data.rdist))
> +#define gic_data_rdist_rd_base() (*gic_data_rdist())
> +#define gic_data_rdist_sgi_base() (gic_data_rdist_rd_base() + SZ_64K)
> +
> +#define DEFAULT_PMR_VALUE 0xf0
> +
> +static inline unsigned int gic_irq(struct irq_data *d)
> +{
> + return d->hwirq;
> +}
> +
> +static inline int gic_irq_in_rdist(struct irq_data *d)
> +{
> + return gic_irq(d) < 32;
> +}
> +
> +static inline void __iomem *gic_dist_base(struct irq_data *d)
> +{
> + if (gic_irq_in_rdist(d)) /* SGI+PPI -> SGI_base for this CPU */
> + return gic_data_rdist_sgi_base();
> +
> + if (d->hwirq <= 1023) /* SPI -> dist_base */
> + return gic_data.dist_base;
> +
> + if (d->hwirq >= 8192)
> + BUG(); /* LPI Detected!!! */
> +
> + return NULL;
> +}
> +
> +static void gic_do_wait_for_rwp(void __iomem *base)
> +{
> + u32 count = 1000000; /* 1s! */
> +
> + while (readl_relaxed(base + GICD_CTLR) & GICD_CTLR_RWP) {
> + count--;
> + if (!count) {
> + pr_err_ratelimited("RWP timeout, gone fishing\n");
> + return;
> + }
> + cpu_relax();
> + udelay(1);
> + };
> +}
> +
> +/* Wait for completion of a distributor change */
> +static void gic_dist_wait_for_rwp(void)
> +{
> + gic_do_wait_for_rwp(gic_data.dist_base);
> +}
> +
> +/* Wait for completion of a redistributor change */
> +static void gic_redist_wait_for_rwp(void)
> +{
> + gic_do_wait_for_rwp(gic_data_rdist_rd_base());
> +}
> +
> +/* Low level accessors */
> +static u64 gic_read_iar(void)
> +{
> + u64 irqstat;
> +
> + asm volatile("mrs %0, " __stringify(ICC_IAR1_EL1) : "=r" (irqstat));
> + return irqstat;
> +}
> +
> +static void gic_write_pmr(u64 val)
> +{
> + asm volatile("msr " __stringify(ICC_PMR_EL1) ", %0" : : "r" (val));
> +}
> +
> +static void gic_write_ctlr(u64 val)
> +{
> + asm volatile("msr " __stringify(ICC_CTLR_EL1) ", %0" : : "r" (val));
> + isb();
> +}
> +
> +static void gic_write_grpen1(u64 val)
> +{
> + asm volatile("msr " __stringify(ICC_GRPEN1_EL1) ", %0" : : "r" (val));
> + isb();
> +}
> +
> +static void gic_write_sgi1r(u64 val)
> +{
> + asm volatile("msr " __stringify(ICC_SGI1R_EL1) ", %0" : : "r" (val));
> +}
> +
> +static void gic_enable_sre(void)
> +{
> + u64 val;
> +
> + asm volatile("mrs %0, " __stringify(ICC_SRE_EL1) : "=r" (val));
> + val |= GICC_SRE_EL1_SRE;
> + asm volatile("msr " __stringify(ICC_SRE_EL1) ", %0" : : "r" (val));
> + isb();
> +
> + /*
> + * Need to check that the SRE bit has actually been set. If
> + * not, it means that SRE is disabled at EL2. We're going to
> + * die painfully, and there is nothing we can do about it.
> + *
> + * Kindly inform the luser.
> + */
> + asm volatile("mrs %0, " __stringify(ICC_SRE_EL1) : "=r" (val));
> + if (!(val & GICC_SRE_EL1_SRE))
> + pr_err("GIC: unable to set SRE (disabled at EL2), panic ahead\n");
> +}
> +
> +static void gic_enable_redist(void)
> +{
> + void __iomem *rbase;
> + u32 count = 1000000; /* 1s! */
> + u32 val;
> +
> + rbase = gic_data_rdist_rd_base();
> +
> + /* Wake up this CPU redistributor */
> + val = readl_relaxed(rbase + GICR_WAKER);
> + val &= ~GICR_WAKER_ProcessorSleep;
> + writel_relaxed(val, rbase + GICR_WAKER);
> +
> + while (readl_relaxed(rbase + GICR_WAKER) & GICR_WAKER_ChildrenAsleep) {
> + count--;
> + if (!count) {
> + pr_err_ratelimited("redist didn't wake up...\n");
> + return;
> + }
> + cpu_relax();
> + udelay(1);
> + };
> +}
> +
> +/*
> + * Routines to acknowledge, disable and enable interrupts
> + */
> +static void gic_poke_irq(struct irq_data *d, u32 offset)
> +{
> + u32 mask = 1 << (gic_irq(d) % 32);
> + void (*rwp_wait)(void);
> + void __iomem *base;
> +
> + if (gic_irq_in_rdist(d)) {
> + base = gic_data_rdist_sgi_base();
> + rwp_wait = gic_redist_wait_for_rwp;
> + } else {
> + base = gic_data.dist_base;
> + rwp_wait = gic_dist_wait_for_rwp;
> + }
> +
> + writel_relaxed(mask, base + offset + (gic_irq(d) / 32) * 4);
> + rwp_wait();
> +}
> +
> +static int gic_peek_irq(struct irq_data *d, u32 offset)
> +{
> + u32 mask = 1 << (gic_irq(d) % 32);
> + void __iomem *base;
> +
> + if (gic_irq_in_rdist(d))
> + base = gic_data_rdist_sgi_base();
> + else
> + base = gic_data.dist_base;
> +
> + return !!(readl_relaxed(base + offset + (gic_irq(d) / 32) * 4) & mask);
> +}
> +
> +static void gic_mask_irq(struct irq_data *d)
> +{
> + gic_poke_irq(d, GICD_ICENABLER);
> +}
> +
> +static void gic_unmask_irq(struct irq_data *d)
> +{
> + gic_poke_irq(d, GICD_ISENABLER);
> +}
> +
> +static void gic_eoi_irq(struct irq_data *d)
> +{
> + gic_write_eoir(gic_irq(d));
> +}
> +
> +static int gic_set_type(struct irq_data *d, unsigned int type)
> +{
> + unsigned int irq = gic_irq(d);
> + void (*rwp_wait)(void);
> + void __iomem *base;
> +
> + if (gic_irq_in_rdist(d)) {
> + base = gic_data_rdist_sgi_base();
> + rwp_wait = gic_redist_wait_for_rwp;
> + } else {
> + base = gic_data.dist_base;
> + rwp_wait = gic_dist_wait_for_rwp;
> + }
> +
> + /* Interrupt configuration for SGIs can't be changed */
> + if (irq < 16)
> + return -EINVAL;
> +
> + if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
> + return -EINVAL;
> +
> + gic_configure_irq(irq, type, base, rwp_wait);
I'm noticing here that we're only waiting for the write to config/enable
if the IRQ was already enabled in gic_configure_irq, but gic_unmask_irq
just enables the IRQ without waiting for operation to complete.
So I'm wondering if there isn't a disconnect between configuring a
disabled IRQ and immediately unmasking it, versus configuring an enabled
IRQ?
> +
> + return 0;
> +}
> +
> +static u64 gic_mpidr_to_affinity(u64 mpidr)
> +{
> + u64 aff;
> +
> + aff = (MPIDR_AFFINITY_LEVEL(mpidr, 3) << 32 |
> + MPIDR_AFFINITY_LEVEL(mpidr, 2) << 16 |
> + MPIDR_AFFINITY_LEVEL(mpidr, 1) << 8 |
> + MPIDR_AFFINITY_LEVEL(mpidr, 0)) & ~GICD_IROUTER_SPI_MODE_ANY;
> +
> + return aff;
> +}
> +
> +static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
> +{
> + u64 irqnr;
> +
> + do {
> + irqnr = gic_read_iar();
> +
> + if (likely(irqnr > 15 && irqnr < 1021)) {
> + irqnr = irq_find_mapping(gic_data.domain, irqnr);
> + handle_IRQ(irqnr, regs);
> + continue;
> + }
> + if (irqnr < 16) {
> + gic_write_eoir(irqnr);
> +#ifdef CONFIG_SMP
> + handle_IPI(irqnr, regs);
> +#else
> + WARN_ONCE(true, "Unexpected SGI received!\n");
> +#endif
> + continue;
> + }
> + } while (irqnr != 0x3ff);
> +}
> +
> +static void __init gic_dist_init(void)
> +{
> + unsigned int i;
> + u64 affinity;
> + void __iomem *base = gic_data.dist_base;
> +
> + /* Disable the distributor */
> + writel_relaxed(0, base + GICD_CTLR);
> +
> + gic_dist_config(base, gic_data.irq_nr, gic_dist_wait_for_rwp);
> +
> + /* Enable distributor with ARE, Group1 */
> + writel_relaxed(GICD_CTLR_ARE_NS | GICD_CTLR_ENABLE_G1A | GICD_CTLR_ENABLE_G1,
> + base + GICD_CTLR);
> +
> + /*
> + * Set all global interrupts to the boot CPU only. ARE must be
> + * enabled.
> + */
> + affinity = gic_mpidr_to_affinity(cpu_logical_map(smp_processor_id()));
> + for (i = 32; i < gic_data.irq_nr; i++)
> + writeq_relaxed(affinity, base + GICD_IROUTER + i * 8);
> +}
> +
> +static int gic_populate_rdist(void)
> +{
> + u64 mpidr = cpu_logical_map(smp_processor_id());
> + u64 typer;
> + u32 aff;
> + int i;
> +
> + /* Convery affinity to a 32bit value... */
s/Convery/Convert/
while you're at it, you could go the extra mile and specify "that can be
matched to GICR_TYPER bits [63:32]". If you really wanted to.
> + aff = (MPIDR_AFFINITY_LEVEL(mpidr, 3) << 24 |
> + MPIDR_AFFINITY_LEVEL(mpidr, 2) << 16 |
> + MPIDR_AFFINITY_LEVEL(mpidr, 1) << 8 |
> + MPIDR_AFFINITY_LEVEL(mpidr, 0));
> +
> + for (i = 0; i < gic_data.redist_regions; i++) {
> + void __iomem *ptr = gic_data.redist_base[i];
> + u32 reg;
> +
> + reg = readl_relaxed(ptr + GICR_PIDR2) & GIC_PIDR2_ARCH_MASK;
> + if (reg != 0x30 && reg != 0x40) { /* We're in trouble... */
> + pr_warn("No redistributor present @%p\n", ptr);
> + break;
> + }
> +
> + do {
> + typer = readq_relaxed(ptr + GICR_TYPER);
> + if ((typer >> 32) == aff) {
> + gic_data_rdist_rd_base() = ptr;
> + pr_info("CPU%d: found redistributor %llx @%p\n",
> + smp_processor_id(),
> + (unsigned long long)mpidr, ptr);
> + return 0;
> + }
> +
> + if (gic_data.redist_stride) {
> + ptr += gic_data.redist_stride;
> + } else {
> + ptr += SZ_64K * 2; /* Skip RD_base + SGI_base */
> + if (typer & GICR_TYPER_VLPIS)
> + ptr += SZ_64K * 2; /* Skip VLPI_base + reserved page */
> + }
> + } while (!(typer & GICR_TYPER_LAST));
> + }
> +
> + /* We couldn't even deal with ourselves... */
> + WARN(true, "CPU%d: mpidr %llx has no re-distributor!\n",
> + smp_processor_id(), (unsigned long long)mpidr);
> + return -ENODEV;
> +}
> +
> +static void gic_cpu_init(void)
> +{
> + void __iomem *rbase;
> +
> + /* Register ourselves with the rest of the world */
> + if (gic_populate_rdist())
> + return;
> +
> + gic_enable_redist();
> +
> + rbase = gic_data_rdist_sgi_base();
> +
> + gic_cpu_config(rbase, gic_redist_wait_for_rwp);
> +
> + /* Enable system registers */
> + gic_enable_sre();
> +
> + /* Set priority mask register */
> + gic_write_pmr(DEFAULT_PMR_VALUE);
> +
> + /* EOI deactivates interrupt too (mode 0) */
> + gic_write_ctlr(GICC_CTLR_EL1_EOImode_drop_dir);
> +
> + /* ... and let's hit the road... */
> + gic_write_grpen1(1);
> +}
> +
> +#ifdef CONFIG_SMP
> +static int gic_secondary_init(struct notifier_block *nfb,
> + unsigned long action, void *hcpu)
> +{
> + if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
> + gic_cpu_init();
> + return NOTIFY_OK;
> +}
> +
> +/*
> + * Notifier for enabling the GIC CPU interface. Set an arbitrarily high
> + * priority because the GIC needs to be up before the ARM generic timers.
> + */
> +static struct notifier_block gic_cpu_notifier = {
> + .notifier_call = gic_secondary_init,
> + .priority = 100,
> +};
> +
> +static u16 gic_compute_target_list(int *base_cpu, const struct cpumask *mask,
> + u64 cluster_id)
> +{
> + int cpu = *base_cpu;
> + u64 mpidr = cpu_logical_map(cpu);
> + u16 tlist = 0;
> +
> + while (cpu < nr_cpu_ids) {
> + /*
> + * If we ever get a cluster of more than 16 CPUs, just
> + * scream and skip that CPU.
> + */
> + if (WARN_ON((mpidr & 0xff) >= 16))
> + goto out;
> +
> + tlist |= 1 << (mpidr & 0xf);
> +
> + cpu = cpumask_next(cpu, mask);
> + if (cpu == nr_cpu_ids)
> + goto out;
> +
> + mpidr = cpu_logical_map(cpu);
> +
> + if (cluster_id != (mpidr & ~0xffUL)) {
> + cpu--;
> + goto out;
> + }
> + }
> +out:
> + *base_cpu = cpu;
> + return tlist;
> +}
> +
> +static void gic_send_sgi(u64 cluster_id, u16 tlist, unsigned int irq)
> +{
> + u64 val;
> +
> + val = (MPIDR_AFFINITY_LEVEL(cluster_id, 3) << 48 |
> + MPIDR_AFFINITY_LEVEL(cluster_id, 2) << 32 |
> + irq << 24 |
> + MPIDR_AFFINITY_LEVEL(cluster_id, 1) << 16 |
> + tlist);
> +
> + pr_debug("CPU%d: ICC_SGI1R_EL1 %llx\n", smp_processor_id(), val);
> + gic_write_sgi1r(val);
> +}
> +
> +static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
> +{
> + int cpu;
> +
> + if (WARN_ON(irq >= 16))
> + return;
> +
> + /*
> + * Ensure that stores to Normal memory are visible to the
> + * other CPUs before issuing the IPI.
> + */
> + smp_wmb();
> +
> + for_each_cpu_mask(cpu, *mask) {
> + u64 cluster_id = cpu_logical_map(cpu) & ~0xffUL;
> + u16 tlist;
> +
> + tlist = gic_compute_target_list(&cpu, mask, cluster_id);
> + gic_send_sgi(cluster_id, tlist, irq);
> + }
> +
> + /* Force the above writes to ICC_SGI1R_EL1 to be executed */
> + isb();
> +}
> +
> +static void gic_smp_init(void)
> +{
> + set_smp_cross_call(gic_raise_softirq);
> + register_cpu_notifier(&gic_cpu_notifier);
> +}
> +
> +static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
> + bool force)
> +{
> + unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
> + void __iomem *reg;
> + int enabled;
> + u64 val;
> +
> + if (gic_irq_in_rdist(d))
> + return -EINVAL;
> +
> + /* If interrupt was enabled, disable it first */
> + enabled = gic_peek_irq(d, GICD_ISENABLER);
> + if (enabled)
> + gic_mask_irq(d);
> +
> + reg = gic_dist_base(d) + GICD_IROUTER + (gic_irq(d) * 8);
> + val = gic_mpidr_to_affinity(cpu_logical_map(cpu));
> +
> + writeq_relaxed(val, reg);
> +
> + /*
> + * If the interrupt was enabled, enabled it again. Otherwise,
> + * just wait for the distributor to have digested our changes.
> + */
> + if (enabled)
> + gic_unmask_irq(d);
> + else
> + gic_dist_wait_for_rwp();
If we don't need to wait for RWP when enabling the interrupt, why do we
need to wait if we're not going to enable it (presumably nothing ever
takes effect until someone later enables the interrupt, in which case
the effect would be the same? no?)?
> +
> + return IRQ_SET_MASK_OK;
> +}
> +#else
> +#define gic_set_affinity NULL
> +#define gic_smp_init() do { } while(0)
> +#endif
> +
> +static struct irq_chip gic_chip = {
> + .name = "GICv3",
> + .irq_mask = gic_mask_irq,
> + .irq_unmask = gic_unmask_irq,
> + .irq_eoi = gic_eoi_irq,
> + .irq_set_type = gic_set_type,
> + .irq_set_affinity = gic_set_affinity,
> +};
> +
> +static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
> + irq_hw_number_t hw)
> +{
> + /* SGIs are private to the core kernel */
> + if (hw < 16)
> + return -EPERM;
> + /* PPIs */
> + if (hw < 32) {
> + irq_set_percpu_devid(irq);
> + irq_set_chip_and_handler(irq, &gic_chip,
> + handle_percpu_devid_irq);
> + set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
> + }
> + /* SPIs */
> + if (hw >= 32 && hw < gic_data.irq_nr) {
> + irq_set_chip_and_handler(irq, &gic_chip,
> + handle_fasteoi_irq);
> + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
> + }
> + irq_set_chip_data(irq, d->host_data);
> + return 0;
> +}
> +
> +static int gic_irq_domain_xlate(struct irq_domain *d,
> + struct device_node *controller,
> + const u32 *intspec, unsigned int intsize,
> + unsigned long *out_hwirq, unsigned int *out_type)
> +{
> + if (d->of_node != controller)
> + return -EINVAL;
> + if (intsize < 3)
> + return -EINVAL;
> +
> + switch(intspec[0]) {
> + case 0: /* SPI */
> + *out_hwirq = intspec[1] + 32;
> + break;
> + case 1: /* PPI */
> + *out_hwirq = intspec[1] + 16;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + *out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
> + return 0;
> +}
> +
> +static const struct irq_domain_ops gic_irq_domain_ops = {
> + .map = gic_irq_domain_map,
> + .xlate = gic_irq_domain_xlate,
> +};
> +
> +static int __init gic_of_init(struct device_node *node, struct device_node *parent)
> +{
> + void __iomem *dist_base;
> + void __iomem **redist_base;
> + u64 redist_stride;
> + u32 redist_regions;
> + u32 reg;
> + int gic_irqs;
> + int err;
> + int i;
> +
> + dist_base = of_iomap(node, 0);
> + if (!dist_base) {
> + pr_err("%s: unable to map gic dist registers\n",
> + node->full_name);
> + return -ENXIO;
> + }
> +
> + reg = readl_relaxed(dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK;
> + if (reg != 0x30 && reg != 0x40) {
> + pr_err("%s: no distributor detected, giving up\n",
> + node->full_name);
> + err = -ENODEV;
> + goto out_unmap_dist;
> + }
> +
> + if (of_property_read_u32(node, "#redistributor-regions", &redist_regions))
> + redist_regions = 1;
> +
> + redist_base = kzalloc(sizeof(*redist_base) * redist_regions, GFP_KERNEL);
> + if (!redist_base) {
> + err = -ENOMEM;
> + goto out_unmap_dist;
> + }
> +
> + for (i = 0; i < redist_regions; i++) {
> + redist_base[i] = of_iomap(node, 1 + i);
> + if (!redist_base[i]) {
> + pr_err("%s: couldn't map region %d\n",
> + node->full_name, i);
> + err = -ENODEV;
> + goto out_unmap_rdist;
> + }
> + }
> +
> + if (of_property_read_u64(node, "redistributor-stride", &redist_stride))
> + redist_stride = 0;
> +
> + gic_data.dist_base = dist_base;
> + gic_data.redist_base = redist_base;
> + gic_data.redist_regions = redist_regions;
> + gic_data.redist_stride = redist_stride;
> +
> + /*
> + * Find out how many interrupts are supported.
> + * The GIC only supports up to 1020 interrupt sources (SGI+PPI+SPI)
> + */
> + gic_irqs = readl_relaxed(gic_data.dist_base + GICD_TYPER) & 0x1f;
> + gic_irqs = (gic_irqs + 1) * 32;
> + if (gic_irqs > 1020)
> + gic_irqs = 1020;
> + gic_data.irq_nr = gic_irqs;
> +
> + gic_data.domain = irq_domain_add_tree(node, &gic_irq_domain_ops,
> + &gic_data);
> + gic_data.rdist = alloc_percpu(typeof(*gic_data.rdist));
> +
> + if (WARN_ON(!gic_data.domain) || WARN_ON(!gic_data.rdist)) {
> + err = -ENOMEM;
> + goto out_free;
> + }
> +
> + set_handle_irq(gic_handle_irq);
> +
> + gic_smp_init();
> + gic_dist_init();
> + gic_cpu_init();
> +
> + return 0;
> +
> +out_free:
> + if (gic_data.domain)
> + irq_domain_remove(gic_data.domain);
> + free_percpu(gic_data.rdist);
> +out_unmap_rdist:
> + for (i = 0; i < redist_regions; i++)
> + if (redist_base[i])
> + iounmap(redist_base[i]);
> + kfree(redist_base);
> +out_unmap_dist:
> + iounmap(dist_base);
> + return err;
> +}
> +
> +IRQCHIP_DECLARE(gic_v3, "arm,gic-v3", gic_of_init);
> diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
> new file mode 100644
> index 0000000..16c8b05
> --- /dev/null
> +++ b/include/linux/irqchip/arm-gic-v3.h
> @@ -0,0 +1,188 @@
> +/*
> + * Copyright (C) 2013, 2014 ARM Limited, All Rights Reserved.
> + * Author: Marc Zyngier <marc.zyngier at arm.com>
> + *
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +#ifndef __LINUX_IRQCHIP_ARM_GIC_V3_H
> +#define __LINUX_IRQCHIP_ARM_GIC_V3_H
> +
> +/*
> + * Distributor registers. We assume we're running non-secure, with ARE
> + * being set. Secure-only and non-ARE registers are not described.
> + */
> +#define GICD_CTLR 0x0000
> +#define GICD_TYPER 0x0004
> +#define GICD_IIDR 0x0008
> +#define GICD_STATUSR 0x0010
> +#define GICD_SETSPI_NSR 0x0040
> +#define GICD_CLRSPI_NSR 0x0048
> +#define GICD_SETSPI_SR 0x0050
> +#define GICD_CLRSPI_SR 0x0058
> +#define GICD_SEIR 0x0068
> +#define GICD_ISENABLER 0x0100
> +#define GICD_ICENABLER 0x0180
> +#define GICD_ISPENDR 0x0200
> +#define GICD_ICPENDR 0x0280
> +#define GICD_ISACTIVER 0x0300
> +#define GICD_ICACTIVER 0x0380
> +#define GICD_IPRIORITYR 0x0400
> +#define GICD_ICFGR 0x0C00
> +#define GICD_IROUTER 0x6000
> +#define GICD_PIDR2 0xFFE8
> +
> +#define GICD_CTLR_RWP (1U << 31)
> +#define GICD_CTLR_ARE_NS (1U << 4)
> +#define GICD_CTLR_ENABLE_G1A (1U << 1)
> +#define GICD_CTLR_ENABLE_G1 (1U << 0)
> +
> +#define GICD_IROUTER_SPI_MODE_ONE (0U << 31)
> +#define GICD_IROUTER_SPI_MODE_ANY (1U << 31)
> +
> +#define GIC_PIDR2_ARCH_MASK 0xf0
> +
> +/*
> + * Re-Distributor registers, offsets from RD_base
> + */
> +#define GICR_CTLR GICD_CTLR
> +#define GICR_IIDR 0x0004
> +#define GICR_TYPER 0x0008
> +#define GICR_STATUSR GICD_STATUSR
> +#define GICR_WAKER 0x0014
> +#define GICR_SETLPIR 0x0040
> +#define GICR_CLRLPIR 0x0048
> +#define GICR_SEIR GICD_SEIR
> +#define GICR_PROPBASER 0x0070
> +#define GICR_PENDBASER 0x0078
> +#define GICR_INVLPIR 0x00A0
> +#define GICR_INVALLR 0x00B0
> +#define GICR_SYNCR 0x00C0
> +#define GICR_MOVLPIR 0x0100
> +#define GICR_MOVALLR 0x0110
> +#define GICR_PIDR2 GICD_PIDR2
> +
> +#define GICR_WAKER_ProcessorSleep (1U << 1)
> +#define GICR_WAKER_ChildrenAsleep (1U << 2)
> +
> +/*
> + * Re-Distributor registers, offsets from SGI_base
> + */
> +#define GICR_ISENABLER0 GICD_ISENABLER
> +#define GICR_ICENABLER0 GICD_ICENABLER
> +#define GICR_ISPENDR0 GICD_ISPENDR
> +#define GICR_ICPENDR0 GICD_ICPENDR
> +#define GICR_ISACTIVER0 GICD_ISACTIVER
> +#define GICR_ICACTIVER0 GICD_ICACTIVER
> +#define GICR_IPRIORITYR0 GICD_IPRIORITYR
> +#define GICR_ICFGR0 GICD_ICFGR
> +
> +#define GICR_TYPER_VLPIS (1U << 1)
> +#define GICR_TYPER_LAST (1U << 4)
> +
> +/*
> + * CPU interface registers
> + */
> +#define GICC_CTLR_EL1_EOImode_drop_dir (0U << 1)
> +#define GICC_CTLR_EL1_EOImode_drop (1U << 1)
> +#define GICC_SRE_EL1_SRE (1U << 0)
> +
> +/*
> + * Hypervisor interface registers (SRE only)
> + */
> +#define GICH_LR_VIRTUAL_ID_MASK ((1UL << 32) - 1)
> +
> +#define GICH_LR_EOI (1UL << 41)
> +#define GICH_LR_GROUP (1UL << 60)
> +#define GICH_LR_STATE (3UL << 62)
> +#define GICH_LR_PENDING_BIT (1UL << 62)
> +#define GICH_LR_ACTIVE_BIT (1UL << 63)
> +
> +#define GICH_MISR_EOI (1 << 0)
> +#define GICH_MISR_U (1 << 1)
> +
> +#define GICH_HCR_EN (1 << 0)
> +#define GICH_HCR_UIE (1 << 1)
> +
> +#define GICH_VMCR_CTLR_SHIFT 0
> +#define GICH_VMCR_CTLR_MASK (0x21f << GICH_VMCR_CTLR_SHIFT)
> +#define GICH_VMCR_BPR1_SHIFT 18
> +#define GICH_VMCR_BPR1_MASK (7 << GICH_VMCR_BPR1_SHIFT)
> +#define GICH_VMCR_BPR0_SHIFT 21
> +#define GICH_VMCR_BPR0_MASK (7 << GICH_VMCR_BPR0_SHIFT)
> +#define GICH_VMCR_PMR_SHIFT 24
> +#define GICH_VMCR_PMR_MASK (0xffUL << GICH_VMCR_PMR_SHIFT)
> +
> +#define ICC_EOIR1_EL1 S3_0_C12_C12_1
> +#define ICC_IAR1_EL1 S3_0_C12_C12_0
> +#define ICC_SGI1R_EL1 S3_0_C12_C11_5
> +#define ICC_PMR_EL1 S3_0_C4_C6_0
> +#define ICC_CTLR_EL1 S3_0_C12_C12_4
> +#define ICC_SRE_EL1 S3_0_C12_C12_5
> +#define ICC_GRPEN1_EL1 S3_0_C12_C12_7
> +
> +#define ICC_SRE_EL2 S3_4_C12_C9_5
> +
> +#define ICH_VSEIR_EL2 S3_4_C12_C9_4
> +#define ICH_HCR_EL2 S3_4_C12_C11_0
> +#define ICH_VTR_EL2 S3_4_C12_C11_1
> +#define ICH_MISR_EL2 S3_4_C12_C11_2
> +#define ICH_EISR_EL2 S3_4_C12_C11_3
> +#define ICH_ELSR_EL2 S3_4_C12_C11_5
> +#define ICH_VMCR_EL2 S3_4_C12_C11_7
> +
> +#define __LR0_EL2(x) S3_4_C12_C12_ ## x
> +#define __LR8_EL2(x) S3_4_C12_C13_ ## x
> +
> +#define ICH_LR0_EL2 __LR0_EL2(0)
> +#define ICH_LR1_EL2 __LR0_EL2(1)
> +#define ICH_LR2_EL2 __LR0_EL2(2)
> +#define ICH_LR3_EL2 __LR0_EL2(3)
> +#define ICH_LR4_EL2 __LR0_EL2(4)
> +#define ICH_LR5_EL2 __LR0_EL2(5)
> +#define ICH_LR6_EL2 __LR0_EL2(6)
> +#define ICH_LR7_EL2 __LR0_EL2(7)
> +#define ICH_LR8_EL2 __LR8_EL2(0)
> +#define ICH_LR9_EL2 __LR8_EL2(1)
> +#define ICH_LR10_EL2 __LR8_EL2(2)
> +#define ICH_LR11_EL2 __LR8_EL2(3)
> +#define ICH_LR12_EL2 __LR8_EL2(4)
> +#define ICH_LR13_EL2 __LR8_EL2(5)
> +#define ICH_LR14_EL2 __LR8_EL2(6)
> +#define ICH_LR15_EL2 __LR8_EL2(7)
> +
> +#define __AP0Rx_EL2(x) S3_4_C12_C8_ ## x
> +#define ICH_AP0R0_EL2 __AP0Rx_EL2(0)
> +#define ICH_AP0R1_EL2 __AP0Rx_EL2(1)
> +#define ICH_AP0R2_EL2 __AP0Rx_EL2(2)
> +#define ICH_AP0R3_EL2 __AP0Rx_EL2(3)
> +
> +#define __AP1Rx_EL2(x) S3_4_C12_C9_ ## x
> +#define ICH_AP1R0_EL2 __AP1Rx_EL2(0)
> +#define ICH_AP1R1_EL2 __AP1Rx_EL2(1)
> +#define ICH_AP1R2_EL2 __AP1Rx_EL2(2)
> +#define ICH_AP1R3_EL2 __AP1Rx_EL2(3)
> +
> +#ifndef __ASSEMBLY__
> +
> +#include <linux/stringify.h>
> +
> +static inline void gic_write_eoir(u64 irq)
> +{
> + asm volatile("msr " __stringify(ICC_EOIR1_EL1) ", %0" : : "r" (irq));
> + isb();
> +}
> +
> +#endif
> +
> +#endif
> --
> 1.8.3.4
>
I noticed that you removed all the dist_lock locks here. I assume there
was some rationale behind this, and given you can share that explanation
with me and address the other tiny issues:
Reviewed-by: Christoffer Dall <christoffer.dall at linaro.org>
More information about the linux-arm-kernel
mailing list