[PATCH RFC 3/3] clk: berlin: add driver for BG2x simple PLLs
Sebastian Hesselbarth
sebastian.hesselbarth at gmail.com
Thu May 8 13:16:52 PDT 2014
This is a clock driver for the simple PLLs found on Berlin SoCs.
With repect to PLL registers and features, BG2/BG2CD and BG2Q are
slightly different, e.g. different allowed VCO dividers and bit
shifts.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
---
Cc: Mike Turquette <mturquette at linaro.org>
Cc: Alexandre Belloni <alexandre.belloni at free-electrons.com>
Cc: Antoine Tenart <antoine.tenart at free-electrons.com>
Cc: Jason Cooper <jason at lakedaemon.net>
Cc: Andrew Lunn <andrew at lunn.ch>
Cc: Gregory Clement <gregory.clement at free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
drivers/clk/berlin/berlin2-pll.c | 104 +++++++++++++++++++++++++++++++++++++++
1 file changed, 104 insertions(+)
create mode 100644 drivers/clk/berlin/berlin2-pll.c
diff --git a/drivers/clk/berlin/berlin2-pll.c b/drivers/clk/berlin/berlin2-pll.c
new file mode 100644
index 000000000000..aef4ddd8db10
--- /dev/null
+++ b/drivers/clk/berlin/berlin2-pll.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <asm/div64.h>
+
+#include "common.h"
+
+struct berlin2_pll {
+ struct clk_hw hw;
+ void __iomem *base;
+ struct berlin2_pll_map map;
+};
+
+#define to_berlin2_pll(hw) container_of(hw, struct berlin2_pll, hw)
+
+#define SPLL_CTRL0 0x00
+#define SPLL_CTRL1 0x04
+#define SPLL_CTRL2 0x08
+#define SPLL_CTRL3 0x0c
+#define SPLL_CTRL4 0x10
+
+#define FBDIV_MASK 0x1ff
+#define RFDIV_MASK 0x1f
+#define DIVSEL_MASK 0xf
+
+/*
+ * The output frequency formula for the pll is:
+ * clkout = fbdiv / refdiv * parent / vcodiv
+ */
+static unsigned long
+berlin2_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct berlin2_pll *pll = to_berlin2_pll(hw);
+ struct berlin2_pll_map *map = &pll->map;
+ u32 val, fbdiv, rfdiv, vcodivsel, vcodiv;
+ u64 rate = parent_rate;
+
+ val = readl_relaxed(pll->base + SPLL_CTRL0);
+ fbdiv = (val >> map->fbdiv_shift) & FBDIV_MASK;
+ rfdiv = (val >> map->rfdiv_shift) & RFDIV_MASK;
+ if (rfdiv == 0) {
+ pr_warn("%s has zero rfdiv\n", __clk_get_name(hw->clk));
+ rfdiv = 1;
+ }
+
+ val = readl_relaxed(pll->base + SPLL_CTRL1);
+ vcodivsel = (val >> map->divsel_shift) & DIVSEL_MASK;
+ vcodiv = map->vcodiv[vcodivsel];
+ if (vcodiv == 0) {
+ pr_warn("%s has zero vcodiv (index %d)\n",
+ __clk_get_name(hw->clk), vcodivsel);
+ vcodiv = 1;
+ }
+
+ rate *= fbdiv * map->mult;
+ do_div(rate, rfdiv * vcodiv);
+
+ return (unsigned long)rate;
+}
+
+static const struct clk_ops berlin2_pll_ops = {
+ .recalc_rate = berlin2_pll_recalc_rate,
+};
+
+struct clk * __init
+berlin2_pll_register(const struct berlin2_pll_map *map,
+ void __iomem *base, const char *name,
+ const char *parent_name, unsigned long flags)
+{
+ struct clk_init_data init;
+ struct berlin2_pll *pll;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ /* copy pll_map to allow __initconst */
+ memcpy(&pll->map, map, sizeof(*map));
+ pll->base = base;
+ pll->hw.init = &init;
+ init.name = name;
+ init.ops = &berlin2_pll_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = flags;
+
+ return clk_register(NULL, &pll->hw);
+}
--
1.9.1
More information about the linux-arm-kernel
mailing list