[PATCH 8/8] usb: ohci-da8xx can only be built-in

[Arnd Bergmann]

The PHY setup code of the TI DaVinci DA8xx OHCI controller
uses ad-hoc register access using a pointer that is meant to
be used only by the DaVinci platform implementation and that
is intentionally not exported to loadable modules. This results
in a link error on configurations that use a modular OHCI
code on this platform.

While the proper solution for this problem would be to
implement a real PHY driver shared by ohci-da8xx and musb-da8xx,
this patch for now just works around the build error by
only allowing the ohci-da8xx code to be built-in.

Signed-off-by: Arnd Bergmann <arnd at arndb.de>
Cc: Alan Stern <stern at rowland.harvard.edu>
---
 drivers/usb/host/Kconfig    | 10 ++++++++++
 drivers/usb/host/ohci-hcd.c |  2 +-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index e229a47..3af10b7 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -417,6 +417,16 @@ config USB_OHCI_HCD_OMAP3
 	  Enables support for the on-chip OHCI controller on
 	  OMAP3 and later chips.
 
+config USB_OHCI_HCD_DAVINCI
+	bool "OHCI support for TI DaVinci DA8xx"
+	depends on ARCH_DAVINCI_DA8XX
+	depends on USB_OHCI_HCD=y
+	default y
+	help
+	  Enables support for the DaVinci DA8xx integrated OHCI
+	  controller. This driver cannot currently be a loadable
+	  module because it lacks a proper PHY abstraction.
+
 config USB_OHCI_ATH79
 	bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
 	depends on (SOC_AR71XX || SOC_AR724X)
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 3586460..f98d03f 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1178,7 +1178,7 @@ MODULE_LICENSE ("GPL");
 #define SA1111_DRIVER		ohci_hcd_sa1111_driver
 #endif
 
-#ifdef CONFIG_ARCH_DAVINCI_DA8XX
+#ifdef CONFIG_USB_OHCI_HCD_DAVINCI
 #include "ohci-da8xx.c"
 #define DAVINCI_PLATFORM_DRIVER	ohci_hcd_da8xx_driver
 #endif
-- 
1.8.3.2