[RFC PATCH] ARM: dts: imx6: add new board RIoTboard
Shawn Guo
shawn.guo at freescale.com
Wed May 7 22:41:13 PDT 2014
On Tue, May 06, 2014 at 11:03:32PM +0100, Iain Paton wrote:
> add element14s RIoTboard http://www.riotboard.org which is an i.MX6Solo
> based design targeted at makers.
>
> Where upstream drivers exist I've enabled them, the only exception being i2c3
> which has been sacrificed for the fec interrupt workaround. i2c3 is only
> currently being used for element14s LCD8000-97C lvds connected touch screen,
> but as no upstream driver exists for the touch controller I deem this to be
> an acceptable compromise for now.
> I've also left out enabling ldb due to current problems to coexist with hdmi
> although I have tested that it can work on the board with hdmi disabled.
>
> The fec interrupt errata seems to suggest that a different gpio could be used
> but I can't find any documentation or example dts that does so. Suggestions
> welcome.
Take a look at commit 6261c4c (ARM: dts: imx6qdl-sabrelite: use GPIO_6
for FEC interrupt.). It seems you already has it for your board.
>
>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx6s-riotboard.dts | 23 ++
> arch/arm/boot/dts/imx6sdl-riotboard.dtsi | 588 +++++++++++++++++++++++++++++++
We do not use imx6s as a SoC name in the kernel tree. It's just an
imx6dl with the second CPU core fused out. So please name the file
imx6dl-riotboard.dts.
Also, I'm not sure why you need an additional level with that .dtsi
file, if it will only be soldered with imx6dl. We have that .dtsi for
boards like sabresd, because the board support both imx6q and imx6dl.
> 3 files changed, 612 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6s-riotboard.dts
> create mode 100644 arch/arm/boot/dts/imx6sdl-riotboard.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 377b7c3..fa955af 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -202,6 +202,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
> imx6q-sbc6x.dtb \
> imx6q-udoo.dtb \
> imx6q-wandboard.dtb \
> + imx6s-riotboard.dtb \
> imx6sl-evk.dtb \
> vf610-cosmic.dtb \
> vf610-twr.dtb
> diff --git a/arch/arm/boot/dts/imx6s-riotboard.dts b/arch/arm/boot/dts/imx6s-riotboard.dts
> new file mode 100644
> index 0000000..ed1c9e4
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6s-riotboard.dts
> @@ -0,0 +1,23 @@
> +/*
> + * Copyright 2014 Iain Paton <ipaton0 at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +/dts-v1/;
> +#include "imx6dl.dtsi"
> +#include "imx6sdl-riotboard.dtsi"
> +
> +/ {
> + model = "RIoTboard i.MX6S";
> + compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
> +
> + memory {
> + reg = <0x10000000 0x40000000>;
> + };
> +
> +};
> +
> diff --git a/arch/arm/boot/dts/imx6sdl-riotboard.dtsi b/arch/arm/boot/dts/imx6sdl-riotboard.dtsi
> new file mode 100644
> index 0000000..b7bf58c
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6sdl-riotboard.dtsi
> @@ -0,0 +1,588 @@
> +/*
> + * Copyright 2014 Iain Paton <ipaton0 at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + regulators {
> + compatible = "simple-bus";
> +
> + reg_2p5v: 2p5v {
Please follow commit 56160e3 (ARM: dts: imx6: use generic node name for
fixed regulator) to code fixed regulators.
> + compatible = "regulator-fixed";
> + regulator-name = "2P5V";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <2500000>;
> + regulator-always-on;
> + };
> +
> + reg_3p3v: 3p3v {
> + compatible = "regulator-fixed";
> + regulator-name = "3P3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + reg_usb_otg_vbus: usb_otg_vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usb_otg_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio3 22 0>;
> + enable-active-high;
> + };
> +
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led0: user1 {
> + label = "user1";
> + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
> + default-state = "on";
> + linux,default-trigger = "heartbeat";
> + };
> +
> + led1: user2 {
> + label = "user2";
> + gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> + };
> +
> + sound {
> + compatible = "fsl,imx-audio-sgtl5000";
> + model = "imx6-riotboard-sgtl5000";
> + ssi-controller = <&ssi1>;
> + audio-codec = <&codec>;
> + audio-routing =
> + "MIC_IN", "Mic Jack",
> + "Mic Jack", "Mic Bias",
> + "Headphone Jack", "HP_OUT";
> + mux-int-port = <1>;
> + mux-ext-port = <3>;
> + };
> +
> +};
> +
> +
> +&audmux {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_audmux>;
> + status = "okay";
> +};
> +
> +
> +
> +&ecspi1 {
> + fsl,spi-num-chipselects = <1>;
> + cs-gpios = <&gpio5 17 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>;
> + status = "okay";
> +
> + spidev at 1 {
> + spi-max-frequency = <24000000>;
> + reg = <0>;
> + compatible = "spidev";
> + };
> +};
> +
> +&ecspi2 {
> + fsl,spi-num-chipselects = <2>;
> + cs-gpios = <&gpio5 9 0>, <&gpio5 12 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2>;
> + status = "okay";
> +
> + spidev at 1 {
> + spi-max-frequency = <24000000>;
> + reg = <0>;
> + compatible = "spidev";
> + };
> + spidev at 2 {
> + spi-max-frequency = <24000000>;
> + reg = <1>;
> + compatible = "spidev";
> + };
> +};
> +
> +&ecspi3 {
> + fsl,spi-num-chipselects = <2>;
> + cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi3>;
> + status = "okay";
> +
> + spidev at 1 {
> + spi-max-frequency = <24000000>;
> + reg = <0>;
> + compatible = "spidev";
> + };
> + spidev at 2 {
> + spi-max-frequency = <24000000>;
> + reg = <1>;
> + compatible = "spidev";
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rgmii";
> + phy-reset-gpios = <&gpio3 31 0>;
> + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
> + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + compatible = "fsl,imx6dl-hdmi";
> + ddc-i2c-bus = <&i2c2>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +
> + codec: sgtl5000 at 0a {
> + compatible = "fsl,sgtl5000";
> + reg = <0x0a>;
> + clocks = <&clks 201>;
> + VDDA-supply = <®_2p5v>;
> + VDDIO-supply = <®_3p3v>;
> + };
> +
> + pmic: pf0100 at 08 {
> + compatible = "fsl,pfuze100";
> + reg = <0x08>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <16 8>;
> +
> + regulators {
> +
> + reg_vddcore: sw1ab { /* VDDARM_IN */
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-always-on;
> + };
> +
> + reg_vddsoc: sw1c { /* VDDSOC_IN */
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-always-on;
> + };
> +
> + reg_gen_3v3: sw2 { /* VDDHIGH_IN */
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + reg_ddr_1v5a: sw3a { /* NVCC_DRAM, NVCC_RGMII */
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-always-on;
> + };
> +
> + reg_ddr_1v5b: sw3b { /* NVCC_DRAM, NVCC_RGMII */
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-always-on;
> + };
> +
> + reg_ddr_vtt: sw4 { /* MIPI conn */
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-always-on;
> + };
> +
> + reg_5v_600mA: swbst { /* not used */
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5150000>;
> + };
> +
> + reg_snvs_3v: vsnvs { /* VDD_SNVS_IN */
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + };
> +
> + vref_reg: vrefddr { /* VREF_DDR */
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + reg_vgen1_1v5: vgen1 { /* not used */
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + reg_vgen2_1v2_eth: vgen2 { /* pcie ? */
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + regulator-always-on;
> + };
> +
> + reg_vgen3_2v8: vgen3 { /* not used */
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + reg_vgen4_1v8: vgen4 { /* NVCC_SD3 */
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + reg_vgen5_2v5_sgtl: vgen5 { /* Pwr LED & 5V0_delayed enable */
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + reg_vgen6_3v3: vgen6 { /* #V#_DELAYED enable, MIPI */
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +};
> +
> +&i2c4 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c4>;
> + clocks = <&clks 116>;
> + status = "okay";
> +};
> +
> +
> +&iomuxc {
Putting this iomuxc node which has a big mount of data at the bottom of
the file can slightly make the dts file more readable.
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + imx6-embest {
Why 'embest'? It's more sensible to use 'riotboard'?
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* user led0 */
> + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x80000000 /* user led1 */
These should be in a pinctrl entry for led rather than hog group.
> + >;
> + };
> +
> + pinctrl_audmux: audmuxgrp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x8000000
> + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x8000000
> + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x8000000
> + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x8000000
> + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */
> + >;
> + };
> +
> + pinctrl_ecspi1: ecspi1grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
> + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
> + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
> + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x000b1 /* CS0 */
> + >;
> + };
> +
> + pinctrl_ecspi2: ecspi2grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x000b1 /* CS1 */
> + MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1
> + MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1
> + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1 /* CS0 */
> + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1
> + >;
> + };
> +
> + pinctrl_ecspi3: ecspi3grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
> + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
> + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
> + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 /* CS0 */
> + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x000b1 /* CS1 */
> + >;
> + };
> +
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000
> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 /* AR8035 pin strapping: IO voltage: pull up */
> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 /* AR8035 pin strapping: PHYADDR#0: pull down */
> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0 /* AR8035 pin strapping: PHYADDR#1: pull down */
> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 /* AR8035 pin strapping: MODE#1: pull up */
> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 /* AR8035 pin strapping: MODE#3: pull up */
> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */
> + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 /* GPIO16 -> AR8035 25MHz */
> + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */
> + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* AR8035 interrupt */
> + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
> + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
> + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_i2c4: i2c4grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
> + MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
> + >;
> + };
> +
> + pinctrl_pwm2: pwm2grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1
> + >;
> + };
> +
> + pinctrl_pwm3: pwm3grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
> + >;
> + };
> +
> + pinctrl_pwm4: pwm4grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
> + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart3: uart3grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
> + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart5: uart5grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
> + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
> + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
> + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x80000000
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
> + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
> + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
> + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
> + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
> + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* SD2 CD */
> + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* SD2 WP */
> + >;
> + };
> +
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
> + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
> + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
> + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
> + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
> + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
> + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3 CD */
> + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x80000000 /* SD3 WP */
> + >;
> + };
> +
> + pinctrl_usdhc4: usdhc4grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
> + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
> + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
> + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
> + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
> + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
> + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x80000000 /* SD4 RST (eMMC) */
> + >;
> + };
> +
> + };
> +};
> +
> +
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1>;
> + status = "okay";
> +};
> +
> +&pwm2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm2>;
> + status = "okay";
> +};
> +
> +&pwm3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm3>;
> + status = "okay";
> +};
> +
> +&pwm4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm4>;
> + status = "okay";
> +};
> +
> +&ssi1 {
> + fsl,mode = "i2s-slave";
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + status = "okay";
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + status = "okay";
> +};
> +
> +&uart4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + status = "okay";
> +};
> +
> +&uart5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart5>;
> + status = "okay";
> +};
> +
> +&usbh1 {
> + status = "okay";
Add 'status' at the end of the property list.
Shawn
> + dr_mode = "host";
> + disable-over-current;
> +};
> +
> +&usbotg {
> + vbus-supply = <®_usb_otg_vbus>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg>;
> + disable-over-current;
> + dr_mode = "otg";
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + cd-gpios = <&gpio1 4 0>;
> + wp-gpios = <&gpio1 2 0>;
> + vmmc-supply = <®_3p3v>;
> + status = "okay";
> +};
> +
> +&usdhc3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + cd-gpios = <&gpio7 0 0>;
> + wp-gpios = <&gpio7 1 0>;
> + vmmc-supply = <®_3p3v>;
> + status = "okay";
> +};
> +
> +&usdhc4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc4>;
> + vmmc-supply = <®_3p3v>;
> + non-removable;
> + status = "okay";
> +};
> --
> 1.8.5.1
>
More information about the linux-arm-kernel
mailing list