[PATCH 4/7] usb: ehci-platform: add optional reset controller retrieval
maxime.ripard at free-electrons.com
Wed May 7 15:00:49 PDT 2014
On Wed, May 07, 2014 at 10:25:55AM -0400, Alan Stern wrote:
> On Tue, 6 May 2014, Maxime Ripard wrote:
> > From: Boris BREZILLON <boris.brezillon at free-electrons.com>
> > On the Allwinner's A31 SoC the reset line connected to the EHCI IP has to
> > be deasserted for the EHCI block to be usable.
> > Add support for an optional reset controller that will be deasserted on
> > power off and asserted on power on.
> > Signed-off-by: Boris BREZILLON <boris.brezillon at free-electrons.com>
> > Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> Is this really a _reset_ line? That is, when you assert the reset
> line, does it actually reset the EHCI controller, or does it merely
> leave the controller in a partially powered-down state?
It actually resets the whole controller.
> The difference is important. During suspend, the controller is
> supposed to remember the state of the port connections as well as other
> settings. If it doesn't, the controller and all attached USB devices
> will have to be reinitialized every time the controller resumes, which
> will increase the latency.
So you're saying that we should move this to the probe then?
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 836 bytes
Desc: Digital signature
More information about the linux-arm-kernel