[PATCH] ARM: dts: Add stdout-path property to i.MX boards
Sascha Hauer
s.hauer at pengutronix.de
Wed May 7 06:19:00 PDT 2014
This adds the stdout-path property to various i.MX boards. Values
of the property have been taken from barebox, so they should be
correct. Also, the older linux,stdout-path property is converted
to stdout-path.
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/boot/dts/imx25-karo-tx25.dts | 4 ++++
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts | 4 ++++
arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts | 4 ++++
arch/arm/boot/dts/imx51-babbage.dts | 4 ++++
arch/arm/boot/dts/imx53-mba53.dts | 4 ++++
arch/arm/boot/dts/imx53-qsb-common.dtsi | 4 ++++
arch/arm/boot/dts/imx6dl-hummingboard.dts | 4 ++++
arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 4 ++++
arch/arm/boot/dts/imx6q-gk802.dts | 2 +-
arch/arm/boot/dts/imx6q-phytec-pbab01.dts | 4 ++++
arch/arm/boot/dts/imx6q-udoo.dts | 4 ++++
arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 4 ++++
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 4 ++++
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 4 ++++
15 files changed, 54 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
index f8db366..c83dce9 100644
--- a/arch/arm/boot/dts/imx25-karo-tx25.dts
+++ b/arch/arm/boot/dts/imx25-karo-tx25.dts
@@ -16,6 +16,10 @@
model = "Ka-Ro TX25";
compatible = "karo,imx25-tx25", "fsl,imx25";
+ chosen {
+ stdout-path = &uart1;
+ };
+
memory {
reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 3c3964a..7c869fe 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -15,6 +15,10 @@
model = "Phytec pca100 rapid development kit";
compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
+ chosen {
+ stdout-path = &uart1;
+ };
+
display: display {
model = "Primeview-PD050VL1";
native-mode = <&timing0>;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index df3b2e7..6ad29b0 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -12,6 +12,10 @@
/ {
model = "Phytec pcm970";
compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
+
+ chosen {
+ stdout-path = &uart1;
+ };
};
&cspi1 {
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 9e9deb2..b5483e5 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -17,6 +17,10 @@
model = "Freescale i.MX51 Babbage Board";
compatible = "fsl,imx51-babbage", "fsl,imx51";
+ chosen {
+ stdout-path = &uart1;
+ };
+
memory {
reg = <0x90000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index 7c8c129..3f2400b 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -17,6 +17,10 @@
model = "TQ MBa53 starter kit";
compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
+ chosen {
+ stdout-path = &uart2;
+ };
+
backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 50000>;
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index ede04fa..76c6306 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -13,6 +13,10 @@
#include "imx53.dtsi"
/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
memory {
reg = <0x70000000 0x20000000>,
<0xb0000000 0x20000000>;
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index 5bfae54..121991c 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -11,6 +11,10 @@
model = "SolidRun HummingBoard DL/Solo";
compatible = "solidrun,hummingboard", "fsl,imx6dl";
+ chosen {
+ stdout-path = &uart1;
+ };
+
ir_recv: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio1 2 1>;
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index e4ae38f..52446ea 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -18,6 +18,10 @@
model = "Data Modul eDM-QMX6 Board";
compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
+ chosen {
+ stdout-path = &uart2;
+ };
+
aliases {
gpio7 = &stmpe_gpio1;
gpio8 = &stmpe_gpio2;
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index 4a9b4dc..5c0e674 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -14,7 +14,7 @@
compatible = "zealz,imx6q-gk802", "fsl,imx6q";
chosen {
- linux,stdout-path = &uart4;
+ stdout-path = &uart4;
};
memory {
diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
index 5607c33..c8fa69d 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
+++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
@@ -15,6 +15,10 @@
/ {
model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board";
compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q";
+
+ chosen {
+ stdout-path = &uart4;
+ };
};
&fec {
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
index ed397d1..7cc0267 100644
--- a/arch/arm/boot/dts/imx6q-udoo.dts
+++ b/arch/arm/boot/dts/imx6q-udoo.dts
@@ -16,6 +16,10 @@
model = "Udoo i.MX6 Quad Board";
compatible = "udoo,imx6q-udoo", "fsl,imx6q";
+ chosen {
+ stdout-path = &uart2;
+ };
+
memory {
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 25cf035..2c253d6 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -22,7 +22,7 @@
};
chosen {
- linux,stdout-path = &uart1;
+ stdout-path = &uart1;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 99be301..4c4b175 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -14,6 +14,10 @@
#include <dt-bindings/input/input.h>
/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
memory {
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 3bec128..6df6127 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -13,6 +13,10 @@
#include <dt-bindings/input/input.h>
/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
memory {
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 0d816d3..fc00d19 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -14,6 +14,10 @@
#include <dt-bindings/input/input.h>
/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
memory {
reg = <0x10000000 0x40000000>;
};
--
2.0.0.rc0
More information about the linux-arm-kernel
mailing list