[PATCH v4 14/15] clk: exynos5420: add misc clocks

[Shaik Ameer Basha]

Hi Tomasz,

On Tue, May 6, 2014 at 11:19 PM, Tomasz Figa <tomasz.figa at gmail.com> wrote:
> Shaik,
>
>
> On 06.05.2014 18:26, Shaik Ameer Basha wrote:
>>
>> This patch adds some missing miscellaneous clocks specific
>> to exynos5420.
>>
>> Signed-off-by: Rahul Sharma <rahul.sharma at samsung.com>
>> Signed-off-by: Shaik Ameer Basha <shaik.ameer at samsung.com>
>> ---
>>   drivers/clk/samsung/clk-exynos5420.c   |   14 +++++++++++---
>>   include/dt-bindings/clock/exynos5420.h |    2 ++
>>   2 files changed, 13 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/clk/samsung/clk-exynos5420.c
>> b/drivers/clk/samsung/clk-exynos5420.c
>> index e0e749d..e69e820 100644
>> --- a/drivers/clk/samsung/clk-exynos5420.c
>> +++ b/drivers/clk/samsung/clk-exynos5420.c
>> @@ -273,7 +273,8 @@ PNAME(mout_group5_p) = {"mout_sclk_vpll",
>> "mout_sclk_dpll"};
>>
>>   PNAME(mout_fimd1_final_p) = {"mout_fimd1", "mout_fimd1_opt"};
>>   PNAME(mout_sw_aclk66_p)       = {"dout_aclk66", "mout_sclk_spll"};
>> -PNAME(mout_user_aclk66_peric_p)        = { "fin_pll", "mout_sw_aclk66" };
>> +PNAME(mout_user_aclk66_peric_p)        = { "fin_pll", "mout_sw_aclk66"};
>> +PNAME(mout_user_pclk66_gpio_p) = {"mout_sw_aclk66", "ffactor_sw_aclk66"};
>>
>>   PNAME(mout_sw_aclk200_fsys_p) = {"dout_aclk200_fsys", "mout_sclk_spll"};
>>   PNAME(mout_sw_pclk200_fsys_p) = {"dout_pclk200_fsys", "mout_sclk_spll"};
>> @@ -372,10 +373,13 @@ static struct samsung_fixed_rate_clock
>> exynos5420_fixed_rate_clks[] __initdata =
>>   };
>>
>>   static struct samsung_fixed_factor_clock exynos5420_fixed_factor_clks[]
>> __initdata = {
>> -       FFACTOR(0, "sclk_hsic_12m", "fin_pll", 1, 2, 0),
>> +       FFACTOR(0, "ffactor_hsic_12m", "fin_pll", 1, 2, 0),
>> +       FFACTOR(0, "ffactor_sw_aclk66", "mout_sw_aclk66", 1, 2, 0),
>
>
> Is the "ffactor_" prefix also present in the datasheet? If not, it should be
> removed from clock names as well.

Its not there in manual.
As we are differentiating muxes and dividers with "mout" and "dout"
this prefix is added
to differentiate fixed factor clocks.

shall I keep it or not?

Regards,
Shaik Ameer Basha

>
> Best regards,
> Tomasz