[PATCH v3 00/20] USB support for Armada 38x and Armada 375

[Sebastian Hesselbarth]

[Adding back the original Cc-List]

On 05/07/2014 10:33 AM, Hans de Goede wrote:
> Hi Gregory,
>
> Gregory CLEMENT <gregory.clement <at> free-electrons.com> writes:
>
>> This patch set adds the USB support for the Armada 38x Armada
>> 375. These SoCs use an xHCI but still need specific initialization,
>> mainly to setup the windows memory on the mbus. They also use the same
>> controller that the other mvebu SoC for EHCI.
>
> <snip>
>
>> Gregory CLEMENT (20):
>>    usb: ehci-orion: Fix clock reference leaking
>>    usb: ehci-orion: Add the optional PHY support
>
> If you're using a proper phy driver, do you really need a soc specific ehci
> driver? I've spend a lot of time during the last release cycle to make
> ehci-platform a lot more generic, including adding (optional) phy support to
> it. It would be great if the new Armada SoCs could use ehci-platform instead
> of extending ehci-orion to cover more models (ideally most ehci-foo drivers
> would go away completely). I've no idea how feasible it is to use
> ehci-platform in your case, but IMHO it should at least be considered.

Hans,

unfortunately we currently have no USB-PHY driver for the other mvebu
SoCs. I have started some code grabbing for barebox bootloader and plan
to add proper USB-PHYs for Linux later.

There is one thing very specific to mvebu SoCs, which is the mbus:
you need to setup upstream memory windows for the usb bus master.
 From my current understanding, that will require at least a minimal
stub to remain for ehci-orion.

I do think that most of the stuff in ehci-orion can (and should) be
replaced with ehci-platform then. So, we definitely consider reusing
the generic foo-platform drivers on all opportunities but IMHO we are
not yet ready for it.

Sebastian