[PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support

[Belisko Marek]

Hi Tomi,

On Wed, May 7, 2014 at 9:03 AM, Tomi Valkeinen <tomi.valkeinen at ti.com> wrote:
> On 23/04/14 23:15, Marek Belisko wrote:
>> This patch add support for lcd display on gta04 board. Display control
>> is connected on spi (used spi bitbang driver).
>>
>> Signed-off-by: Marek Belisko <marek at goldelico.com>
>> ---
>>  arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 86 insertions(+)
>
> <snip>
>
>> +&dss {
>> +     pinctrl-names = "default";
>> +     pinctrl-0 = < &dss_dpi_pins >;
>> +
>> +     status = "okay";
>> +
>> +     vdds_dsi-supply = <&vpll2>;
>> +
>> +     dpi_out: endpoint {
>> +               remote-endpoint = <&lcd_in>;
>> +               data-lines = <24>;
>> +       };
>> +
>> +};
>>
>
> Did you try this on 3.15-rc? The above is not right, and I don't think
> it works. You need 'port' node for the dpi_out endpoint.
This patches was tested against 3.15 series and it works. I'l recheck.
>
>  Tomi
>
>

BR,

marek

-- 
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com