[PATCH 0/2] Add VTT regulators for DDR3 AMx3xx Boards

[Tony Lindgren]

* Dave Gerlach <d-gerlach at ti.com> [140505 12:59]:
> The am335x-evmsk and am437x-gp-evm both have a gpio controlled regulator
> for DDR3 VTT voltage. This is configured by boot loader and previously
> just left at that but it is better to define a fixed regulator to control
> the gpio so that the kernel is aware of it.
> 
> Previous discussion here [1].
> 
> Original am437x-gp-evm patch has been updated to reflect actual voltage
> supplied by VTT regulator.

Thanks applying both into omap-for-v3.16/dt.

Tony