[PATCH V5 1/3] arm: dts: dra7: Add crossbar device binding

[Sricharan R]

This adds the irq crossbar device node.

There is a IRQ crossbar device in the soc, which
maps the irq requests from the peripherals to the
mpu interrupt controller's inputs. The Peripheral irq
requests are connected to only one crossbar
input and the output of the crossbar is connected to only one
controller's input line. The crossbar device is used to map
a peripheral input to a free mpu's interrupt controller line.

Cc: Benoit Cousson <bcousson at baylibre.com>
Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
Cc: Rajendra Nayak <rnayak at ti.com>
Cc: Tony Lindgren <tony at atomide.com>
Signed-off-by: Sricharan R <r.sricharan at ti.com>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
[V5] Rebased on top of 3.15-rc4 and corrected the
     irqs-reserved list

 arch/arm/boot/dts/dra7.dtsi |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 149b550..0274a86 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -790,6 +790,14 @@
 			status = "disabled";
 		};
 	};
+
+	crossbar_mpu: crossbar at 4a020000 {
+		compatible = "ti,irq-crossbar";
+		reg = <0x4a002a48 0x130>;
+		ti,max-irqs = <160>;
+		ti,reg-size = <2>;
+		ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
+	};
 };
 
 /include/ "dra7xx-clocks.dtsi"
-- 
1.7.9.5