[PATCH] ARM: shmobile: henninger: add QSPI DT support

[Sergei Shtylyov]

Define the Henninger board dependent part of the QSPI device node.
Add device nodes for Spansion S25FL512S SPI flash and MTD partitions on it.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>

---
This patch is against 'renesas-devel-v3.15-rc3-20140502' tag of Simon Horman's
'renesas.git' repo and SDHI0/2 DT support patch posted last weekend.

 arch/arm/boot/dts/r8a7791-henninger.dts |   38 ++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -109,6 +109,11 @@
 		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
 		renesas,function = "sdhi2";
 	};
+
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
 };
 
 &scif0 {
@@ -158,3 +163,36 @@
 	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl512s";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		partition at 0 {
+			label = "loader_prg";
+			reg = <0x00000000 0x00040000>;
+			read-only;
+		};
+		partition at 40000 {
+			label = "user_prg";
+			reg = <0x00040000 0x00400000>;
+			read-only;
+		};
+		partition at 440000 {
+			label = "flash_fs";
+			reg = <0x00440000 0x03bc0000>;
+		};
+	};
+};