[PATCH v2 0/8] pinctrl-rockchip: Change wrong initial assumptions
heiko at sntech.de
Mon May 5 04:57:31 PDT 2014
Initially due to lack of documentation and (personal) understanding
I assumed that the area holding the iomux settings would be separate
from everything else, while in fact the grf registers contain not only
pinctrl stuff but also dma, usb-phy and general soc-status settings.
Also things like drive-strength we do not support currently are intermixed.
The same is true for the pmu, which does not only contain power domains
but also the system reset as well as well as general registers surviving
system-resets. Additionally the rk3188 moved parts of the pull-setting
registers into the pmu space.
While this wasn't a problem until now, the upcoming rk3288 introduces
additional changes to both the grf and pmu areas. On it even part of
the pinmux registers move into the pmu space.
The code in it's current form supports both the old as well as the
As stated in the v1 thread, this is also a first step to deprecate the
wrongly included gpio-controllers which now duplicate the recently added
gpio-dwapb, that should be used instead.
changes since v1:
- add select MFD_SYSCON as suggested by Max
Heiko Stuebner (8):
pinctrl: rockchip: do not require 2nd register area
pinctrl: rockchip: use regmaps instead of raw mappings
pinctrl: rockchip: rockchip_pinctrl in rockchip_get_bank_data
pinctrl: rockchip: let pmu registers be supplied by a syscon
pinctrl: rockchip: only map bank0-pull-region when pmu regmap missing
pinctrl: rockchip: base regmap supplied by a syscon
dt-bindings: adapt rockchip-pinctrl doc to changed bindings
ARM: dts: rockchip: convert pinctrl nodes to new bindings
.../bindings/pinctrl/rockchip,pinctrl.txt | 28 +++-
arch/arm/boot/dts/rk3066a.dtsi | 2 +-
arch/arm/boot/dts/rk3188.dtsi | 9 +-
arch/arm/boot/dts/rk3xxx.dtsi | 9 +-
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/pinctrl-rockchip.c | 178 +++++++++++++++------
6 files changed, 165 insertions(+), 62 deletions(-)
More information about the linux-arm-kernel