[PATCH 0/7] ARM: EXYNOS: cpuidle: fix AFTR mode on boards with secure firmware enabled

[Bartlomiej Zolnierkiewicz]

Hi,

This patch series fixes support for AFTR idle mode on boards with
secure firmware enabled (it also includes fix for register setup on
EXYNOS4x12 SoCs).  It has been tested on Trats2 target but should
also work on (EXYNOS4412 based) Insignal Origen board.

This patchset depends on "[PATCH V5 00/20] ARM: exynos: cpuidle:
Move the driver to drivers/cpuidle" patch series from Daniel Lezcano
("http://www.spinics.net/lists/linux-samsung-soc/msg28494.html").

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics


Bartlomiej Zolnierkiewicz (5):
  ARM: EXYNOS: add AFTR mode support to firmware do_idle method
  ARM: EXYNOS: PM: replace EXYNOS_BOOT_VECTOR_* macros by static inlines
  ARM: EXYNOS: PM: use c15resume firmware method if secure firmware is
    enabled
  ARM: EXYNOS: PM: fix register setup on EXYNOS4x12 for AFTR mode code
  ARM: EXYNOS: cpuidle: add secure firmware support to AFTR mode code

Kyungmin Park (1):
  arm: firmware: Check firmware is running or not

Tomasz Figa (1):
  ARM: EXYNOS: add support for firmware-assisted c15resume

 arch/arm/common/firmware.c       |  5 +++++
 arch/arm/include/asm/firmware.h  | 14 +++++++++++++-
 arch/arm/mach-exynos/firmware.c  | 18 ++++++++++++++++--
 arch/arm/mach-exynos/pm.c        | 40 ++++++++++++++++++++++++++++++++--------
 drivers/cpuidle/cpuidle-exynos.c |  7 ++++++-
 5 files changed, 72 insertions(+), 12 deletions(-)

-- 
1.8.2.3