[PATCH v3 02/16] clk: exynos5420: add clocks for ISP block
Shaik Ameer Basha
shaik.samsung at gmail.com
Sun May 4 21:14:45 PDT 2014
Hi Tomasz,
On Fri, May 2, 2014 at 3:03 AM, Tomasz Figa <tomasz.figa at gmail.com> wrote:
> On 24.04.2014 15:03, Shaik Ameer Basha wrote:
>>
>> This patch adds missing clocks for ISP block
>>
>> Signed-off-by: Rahul Sharma <rahul.sharma at samsung.com>
>> Signed-off-by: Shaik Ameer Basha <shaik.ameer at samsung.com>
>> ---
>> drivers/clk/samsung/clk-exynos5420.c | 80
>> ++++++++++++++++++++++++++++++++++
>> 1 file changed, 80 insertions(+)
>>
>> diff --git a/drivers/clk/samsung/clk-exynos5420.c
>> b/drivers/clk/samsung/clk-exynos5420.c
>> index 389d4b1..972da5d 100755
>> --- a/drivers/clk/samsung/clk-exynos5420.c
>> +++ b/drivers/clk/samsung/clk-exynos5420.c
>> @@ -57,6 +57,7 @@
>> #define SRC_FSYS 0x10244
>> #define SRC_PERIC0 0x10250
>> #define SRC_PERIC1 0x10254
>> +#define SRC_ISP 0x10270
>> #define SRC_TOP10 0x10280
>> #define SRC_TOP11 0x10284
>> #define SRC_TOP12 0x10288
>> @@ -77,12 +78,15 @@
>> #define DIV_PERIC2 0x10560
>> #define DIV_PERIC3 0x10564
>> #define DIV_PERIC4 0x10568
>> +#define SCLK_DIV_ISP0 0x10580
>> +#define SCLK_DIV_ISP1 0x10584
>> #define GATE_BUS_TOP 0x10700
>> #define GATE_BUS_FSYS0 0x10740
>> #define GATE_BUS_PERIC 0x10750
>> #define GATE_BUS_PERIC1 0x10754
>> #define GATE_BUS_PERIS0 0x10760
>> #define GATE_BUS_PERIS1 0x10764
>> +#define GATE_TOP_SCLK_ISP 0x10870
>> #define GATE_IP_GSCL0 0x10910
>> #define GATE_IP_GSCL1 0x10920
>> #define GATE_IP_MFC 0x1092c
>> @@ -145,6 +149,7 @@ static unsigned long exynos5420_clk_regs[] __initdata
>> = {
>> SRC_MASK_FSYS,
>> SRC_MASK_PERIC0,
>> SRC_MASK_PERIC1,
>> + SRC_ISP,
>> DIV_TOP0,
>> DIV_TOP1,
>> DIV_TOP2,
>> @@ -158,12 +163,15 @@ static unsigned long exynos5420_clk_regs[]
>> __initdata = {
>> DIV_PERIC2,
>> DIV_PERIC3,
>> DIV_PERIC4,
>> + SCLK_DIV_ISP0,
>> + SCLK_DIV_ISP1,
>> GATE_BUS_TOP,
>> GATE_BUS_FSYS0,
>> GATE_BUS_PERIC,
>> GATE_BUS_PERIC1,
>> GATE_BUS_PERIS0,
>> GATE_BUS_PERIS1,
>> + GATE_TOP_SCLK_ISP,
>> GATE_IP_GSCL0,
>> GATE_IP_GSCL1,
>> GATE_IP_MFC,
>> @@ -250,6 +258,15 @@ PNAME(mout_user_aclk200_fsys_p) = {"fin_pll",
>> "mout_sw_aclk200_fsys"};
>>
>> PNAME(mout_sw_aclk200_fsys2_p) = {"dout_aclk200_fsys2",
>> "mout_sclk_spll"};
>> PNAME(mout_user_aclk200_fsys2_p) = {"fin_pll", "mout_sw_aclk200_fsys2"};
>> +PNAME(mout_sw_aclk400_isp_p) = {"dout_aclk400_isp", "mout_sclk_spll"};
>> +PNAME(mout_user_aclk400_isp_p) = {"fin_pll", "mout_sw_aclk400_isp"};
>> +
>> +PNAME(mout_sw_aclk333_432_isp0_p) = {"dout_aclk333_432_isp0",
>> + "mout_sclk_spll"};
>> +PNAME(mout_user_aclk333_432_isp0_p) = {"fin_pll",
>> "mout_sw_aclk333_432_isp0"};
>> +
>> +PNAME(mout_sw_aclk333_432_isp_p) = {"dout_aclk333_432_isp",
>> "mout_sclk_spll"};
>> +PNAME(mout_user_aclk333_432_isp_p) = {"fin_pll",
>> "mout_sw_aclk333_432_isp"};
>>
>> PNAME(mout_sw_aclk200_p) = {"dout_aclk200", "mout_sclk_spll"};
>> PNAME(mout_aclk200_disp1_p) = {"fin_pll", "mout_sw_aclk200"};
>> @@ -265,6 +282,7 @@ PNAME(mout_user_aclk166_p) = {"fin_pll",
>> "mout_sw_aclk166"};
>>
>> PNAME(mout_sw_aclk266_p) = {"dout_aclk266", "mout_sclk_spll"};
>> PNAME(mout_user_aclk266_p) = {"fin_pll", "mout_sw_aclk266"};
>> +PNAME(mout_user_aclk266_isp_p) = {"fin_pll", "mout_sw_aclk266"};
>>
>> PNAME(mout_sw_aclk333_432_gscl_p) = {"dout_aclk333_432_gscl",
>> "mout_sclk_spll"};
>> PNAME(mout_user_aclk333_432_gscl_p) = {"fin_pll",
>> "mout_sw_aclk333_432_gscl"};
>> @@ -448,6 +466,31 @@ static struct samsung_mux_clock exynos5420_mux_clks[]
>> __initdata = {
>> MUX(0, "mout_spi0", mout_group2_p, SRC_PERIC1, 20, 3),
>> MUX(0, "mout_spi1", mout_group2_p, SRC_PERIC1, 24, 3),
>> MUX(0, "mout_spi2", mout_group2_p, SRC_PERIC1, 28, 3),
>> + MUX(0, "mout_aclk400_isp", mout_group1_p, SRC_TOP0, 0, 2),
>> + MUX(0, "mout_sw_aclk400_isp", mout_sw_aclk400_isp_p,
>> + SRC_TOP10, 0, 1),
>> + MUX(0, "mout_user_aclk400_isp", mout_user_aclk400_isp_p,
>> + SRC_TOP3, 0, 1),
>> + MUX(0, "mout_aclk333_432_isp0", mout_group4_p, SRC_TOP1, 12, 2),
>> + MUX(0, "mout_sw_aclk333_432_isp0", mout_sw_aclk333_432_isp0_p,
>> + SRC_TOP11, 12, 1),
>> + MUX(0, "mout_user_aclk333_432_isp0", mout_user_aclk333_432_isp0_p,
>> + SRC_TOP4, 12, 1),
>> + MUX(0, "mout_aclk333_432_isp", mout_group4_p,
>> + SRC_TOP1, 4, 2),
>> + MUX(0, "mout_sw_aclk333_432_isp", mout_sw_aclk333_432_isp_p,
>> + SRC_TOP11, 4, 1),
>> + MUX(0, "mout_user_aclk333_432_isp", mout_user_aclk333_432_isp_p,
>> + SRC_TOP4, 4, 1),
>> + MUX(0, "mout_user_aclk266_isp", mout_user_aclk266_isp_p,
>> + SRC_TOP4, 16, 1),
>> +
>> + /* ISP Block */
>> + MUX(0, "mout_pwm_isp", mout_group2_p, SRC_ISP, 24, 3),
>> + MUX(0, "mout_uart_isp", mout_group2_p, SRC_ISP, 20, 3),
>> + MUX(0, "mout_spi0_isp", mout_group2_p, SRC_ISP, 12, 3),
>> + MUX(0, "mout_spi1_isp", mout_group2_p, SRC_ISP, 16, 3),
>> + MUX(0, "mout_isp_sensor", mout_group2_p, SRC_ISP, 28, 3),
>> };
>>
>> static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
>> @@ -528,6 +571,22 @@ static struct samsung_div_clock exynos5420_div_clks[]
>> __initdata = {
>> DIV(0, "dout_pre_spi0", "dout_spi0", DIV_PERIC4, 8, 8),
>> DIV(0, "dout_pre_spi1", "dout_spi1", DIV_PERIC4, 16, 8),
>> DIV(0, "dout_pre_spi2", "dout_spi2", DIV_PERIC4, 24, 8),
>> +
>> + /* ISP Block */
>> + DIV(0, "dout_aclk400_isp", "mout_aclk400_isp", DIV_TOP0, 0, 3),
>> + DIV(0, "dout_aclk333_432_isp0", "mout_aclk333_432_isp0",
>> + DIV_TOP1, 16, 3),
>> + DIV(0, "dout_aclk333_432_isp", "mout_aclk333_432_isp",
>> + DIV_TOP1, 4, 3),
>> + DIV(0, "dout_pwm_isp", "mout_pwm_isp", SCLK_DIV_ISP1, 28, 4),
>> + DIV(0, "dout_uart_isp", "mout_uart_isp", SCLK_DIV_ISP1, 24, 4),
>> + DIV(0, "dout_spi0_isp", "mout_spi0_isp", SCLK_DIV_ISP1, 16, 4),
>> + DIV(0, "dout_spi1_isp", "mout_spi1_isp", SCLK_DIV_ISP1, 20, 4),
>> + DIV(0, "dout_spi0_isp_pre", "dout_spi0_isp", SCLK_DIV_ISP1, 0, 8),
>> + DIV(0, "dout_spi1_isp_pre", "dout_spi1_isp", SCLK_DIV_ISP1, 8, 8),
>> + DIV(0, "dout_isp_sensor0", "mout_isp_sensor", SCLK_DIV_ISP0, 8,
>> 8),
>> + DIV(0, "dout_isp_sensor1", "mout_isp_sensor", SCLK_DIV_ISP0, 16,
>> 8),
>> + DIV(0, "dout_isp_sensor2", "mout_isp_sensor", SCLK_DIV_ISP0, 24,
>> 8),
>> };
>>
>> static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
>> @@ -759,6 +818,27 @@ static struct samsung_gate_clock
>> exynos5420_gate_clks[] __initdata = {
>> 0),
>> GATE(CLK_SMMU_MIXER, "smmu_mixer", "aclk200_disp1", GATE_IP_DISP1,
>> 9, 0,
>> 0),
>> + GATE(0, "aclk266_isp", "mout_user_aclk266_isp",
>> + GATE_BUS_TOP, 13, 0, 0),
>> + GATE(0, "aclk400_isp", "mout_user_aclk400_isp",
>> + GATE_BUS_TOP, 16, 0, 0),
>> + GATE(0, "aclk333_432_isp0",
>> + "mout_user_aclk333_432_isp0", GATE_BUS_TOP, 5, 0,
>> 0),
>> + GATE(0, "aclk333_432_isp",
>> + "mout_user_aclk333_432_isp", GATE_BUS_TOP, 8, 0,
>> 0),
>
>
> What are these 4 gate clocks needed for? Do we really need this kind of
These are the clocks coming out of CMU_TOP and provided to the ISP block.
These clocks are provided to IPs like ISP, DRC, SCALERC, SCALERP,
Coreted-A5, FD etc.,
Actually there are gates specific to each IP after the above four gates.
CMU_TOP ---> Above Four Gates ---> Gates specific to ISP IPs ---> ISP IPs
Above four gates will not be used directly by any driver.
> gating granularity? Isn't there a gate bit in one of GATE_IP_* registers?
Yes, these clocks doesn't have gate bits in any of GATE_IP_* registers.
Regards,
Shaik Ameer Basha
>
> Best regards,
> Tomasz
More information about the linux-arm-kernel
mailing list