[PATCH 3/5] net: macb: Re-enable RX interrupt only when RX is done

[Soren Brinkmann]

When data is received during the driver processing received data the
NAPI is re-scheduled. In that case the RX interrupt should not be
re-enabled.

Signed-off-by: Soren Brinkmann <soren.brinkmann at xilinx.com>
---

 drivers/net/ethernet/cadence/macb.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index e38fe39d9589..3f4b8ee0b0e7 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -891,16 +891,15 @@ static int macb_poll(struct napi_struct *napi, int budget)
 	if (work_done < budget) {
 		napi_complete(napi);
 
-		/*
-		 * We've done what we can to clean the buffers. Make sure we
-		 * get notified when new packets arrive.
-		 */
-		macb_writel(bp, IER, MACB_RX_INT_FLAGS);
-
 		/* Packets received while interrupts were disabled */
 		status = macb_readl(bp, RSR);
-		if (unlikely(status))
+		if (unlikely(status)) {
+			if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
+				macb_writel(bp, ISR, MACB_BIT(RCOMP));
 			napi_reschedule(napi);
+		} else {
+			macb_writel(bp, IER, MACB_RX_INT_FLAGS);
+		}
 	}
 
 	/* TODO: Handle errors */
-- 
1.9.2.1.g06c4abd