[PATCH 1/2] ARM: EXYNOS: Map SYSRAM through generic SRAM bindings
Sachin Kamat
sachin.kamat at linaro.org
Thu May 1 22:08:47 PDT 2014
On 2 May 2014 07:55, Kukjin Kim <kgene.kim at samsung.com> wrote:
> Heiko Stübner wrote:
>>
>> Hi Sachin,
>>
>> Am Donnerstag, 1. Mai 2014, 16:14:44 schrieb Sachin Kamat:
>> > Instead of hardcoding the SYSRAM details for each SoC,
>> > pass this information through device tree (DT) and make
>> > the code SoC agnostic. Generic SRAM bindings are used
>> > for achieving this.
>> >
>> > Signed-off-by: Sachin Kamat <sachin.kamat at linaro.org>
>> > Cc: Heiko Stuebner <heiko at sntech.de>
>> > Cc: Arnd Bergmann <arnd at arndb.de>
>>
>> very cool :-).
>>
>> I've found one little thing I do not understand, which I describe below.
>> Otherwise
>> Acked-by: Heiko Stuebner <heiko at sntech.de>
>>
>> > ---
>> > This patch is based on linux next (next-20140501) on top of
>> > my Kconfig consolidation patch
>> > http://comments.gmane.org/gmane.linux.kernel.samsung-soc/28642
>> >
>> > Tested on 4210/4412 Origen, 5250/5420 Arndale and SMDK5420 boards.
>> > ---
>> > arch/arm/Kconfig | 1 +
>> > arch/arm/boot/dts/exynos4210-universal_c210.dts | 17 ++++++
>> > arch/arm/boot/dts/exynos4210.dtsi | 18 +++++++
>> > arch/arm/boot/dts/exynos4x12.dtsi | 18 +++++++
>> > arch/arm/boot/dts/exynos5250.dtsi | 18 +++++++
>> > arch/arm/boot/dts/exynos5420.dtsi | 18 +++++++
>> > arch/arm/mach-exynos/common.h | 1 +
>> > arch/arm/mach-exynos/exynos.c | 64
>> > ----------------------- arch/arm/mach-exynos/firmware.c
> |
>> > 5 +-
>> > arch/arm/mach-exynos/include/mach/map.h | 7 ---
>> > arch/arm/mach-exynos/platsmp.c | 39 +++++++++++++-
>> > 11 files changed, 133 insertions(+), 73 deletions(-)
>> >
>> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>> > index a6aaaad19b1a..f66ea9453df9 100644
>> > --- a/arch/arm/Kconfig
>> > +++ b/arch/arm/Kconfig
>> > @@ -855,6 +855,7 @@ config ARCH_EXYNOS
>> > select S5P_DEV_MFC
>> > select SAMSUNG_DMADEV
>> > select SPARSE_IRQ
>> > + select SRAM
>> > select USE_OF
>> > help
>> > Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
>> > diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts
>> > b/arch/arm/boot/dts/exynos4210-universal_c210.dts index
>> > 63e34b24b04f..8d4de5c0d0c7 100644
>> > --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
>> > +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
>> > @@ -28,6 +28,23 @@
>> > bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw
>> rootwait
>> > earlyprintk panic=5 maxcpus=1"; };
>> >
>> > + sram at 02020000 {
>> > + status = "disabled";
>> > + };
>> > +
>> > + sram at 02025000 {
>> > + compatible = "mmio-sram";
>> > + reg = <0x02025000 0x1000>;
>> > + #address-cells = <1>;
>> > + #size-cells = <1>;
>> > + ranges = <0 0x02025000 0x1000>;
>> > +
>> > + smp-sram at 0 {
>> > + compatible = "samsung,exynos4210-sram";
>> > + reg = <0x0 0x1000>;
>> > + };
>> > + };
>>
>> exynos_smp_prepare_sram returns -ENODEV if it can't find
>> samsung,exynos4210-sram-ns, so are you sure your universal_c210 will run
>> without it? I didn't dig to deep into this, so it can also simply be
>> something
>> I overlooked :-)
>>
> Hi Andrzej and Tomasz,
>
> Can you please check above?
Please test v2 of this series.
--
With warm regards,
Sachin
More information about the linux-arm-kernel
mailing list