[PATCH V2 08/19] ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
Ulf Hansson
ulf.hansson at linaro.org
Mon Mar 31 11:18:09 EDT 2014
The mmci host driver supports the common mmc DT parser, which enables
us to use the use common names instead.
Signed-off-by: Ulf Hansson <ulf.hansson at linaro.org>
Acked-by: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/boot/dts/ste-ccu9540.dts | 6 +++---
arch/arm/boot/dts/ste-href.dtsi | 8 ++++----
arch/arm/boot/dts/ste-snowball.dts | 4 ++--
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts
index 2295087..651c56d 100644
--- a/arch/arm/boot/dts/ste-ccu9540.dts
+++ b/arch/arm/boot/dts/ste-ccu9540.dts
@@ -38,8 +38,8 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
- mmc-cap-sd-highspeed;
- mmc-cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
cd-gpios = <&gpio7 6 0x4>; // 230
@@ -63,7 +63,7 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
status = "okay";
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 46dce42..3f07c58 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -116,8 +116,8 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
- mmc-cap-sd-highspeed;
- mmc-cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
st,sig-dir-dat0;
st,sig-dir-dat2;
st,sig-dir-cmd;
@@ -148,7 +148,7 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi2_default_mode>;
pinctrl-1 = <&sdi2_sleep_mode>;
@@ -161,7 +161,7 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi4_default_mode>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index a2f632d..474ef832 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -156,7 +156,7 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
pinctrl-names = "default", "sleep";
@@ -195,7 +195,7 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
- mmc-cap-mmc-highspeed;
+ cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi4_default_mode>;
--
1.7.9.5
More information about the linux-arm-kernel
mailing list