[PATCH 01/55] ARM: OMAP4: CM: use cm_base* in register address calculations

[Tero Kristo]

OMAP44XX_CM*_REGADDR macros should be avoided, instead use the cm_base*
iomaps.

Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
 arch/arm/mach-omap2/cm44xx.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c
index 535d66e..5627072 100644
--- a/arch/arm/mach-omap2/cm44xx.c
+++ b/arch/arm/mach-omap2/cm44xx.c
@@ -30,23 +30,23 @@
 /* Read a register in CM1 */
 u32 omap4_cm1_read_inst_reg(s16 inst, u16 reg)
 {
-	return __raw_readl(OMAP44XX_CM1_REGADDR(inst, reg));
+	return __raw_readl(cm_base + inst + reg);
 }
 
 /* Write into a register in CM1 */
 void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 reg)
 {
-	__raw_writel(val, OMAP44XX_CM1_REGADDR(inst, reg));
+	__raw_writel(val, cm_base + inst + reg);
 }
 
 /* Read a register in CM2 */
 u32 omap4_cm2_read_inst_reg(s16 inst, u16 reg)
 {
-	return __raw_readl(OMAP44XX_CM2_REGADDR(inst, reg));
+	return __raw_readl(cm2_base + inst + reg);
 }
 
 /* Write into a register in CM2 */
 void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 reg)
 {
-	__raw_writel(val, OMAP44XX_CM2_REGADDR(inst, reg));
+	__raw_writel(val, cm2_base + inst + reg);
 }
-- 
1.7.9.5