[PATCH v2 3/3] [media] atmel-isi: add primary DT support
Josh Wu
josh.wu at atmel.com
Mon Mar 31 05:05:13 EDT 2014
Dear Guennadi
On 3/31/2014 5:20 AM, Guennadi Liakhovetski wrote:
> Hi Josh,
>
> Please correct me if I'm wrong, but I don't see how this is going to work
> without the central part - building asynchronous V4L2 data structures from
> the DT, something that your earlier patch
Here you mean Bryan Wu not me, right? ;-)
Bryan write the patch "[v2] media: soc-camera: OF cameras" in:
https://patchwork.linuxtv.org/patch/22288/.
And I saw Ben Dooks already sent out his patch to support soc-camera OF
now (https://patchwork.linuxtv.org/patch/23304/) which is simpler than
Bryan's.
> "media: soc-camera: OF cameras"
> was doing, but which you stopped developing after a discussion with Ben
> (added to Cc).
And yes, atmel-isi dt patch should not work without above SoC-Camera of
support patch.
But as the atmel-isi dt binding document and port node can be finalized.
So I think this patch is ready for the mainline.
BTW: I will test Ben's patch with atmel-isi.
thanks and best regards,
Josh Wu
>
> Thanks
> Guennadi
>
> On Tue, 25 Mar 2014, Josh Wu wrote:
>
>> This patch add the DT support for Atmel ISI driver.
>> It use the same v4l2 DT interface that defined in video-interfaces.txt.
>>
>> Signed-off-by: Josh Wu <josh.wu at atmel.com>
>> Cc: devicetree at vger.kernel.org
>> ---
>> v1 --> v2:
>> refine the binding document.
>> add port node description.
>> removed the optional property.
>>
>> .../devicetree/bindings/media/atmel-isi.txt | 50 ++++++++++++++++++++
>> drivers/media/platform/soc_camera/atmel-isi.c | 31 +++++++++++-
>> 2 files changed, 79 insertions(+), 2 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/media/atmel-isi.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/atmel-isi.txt b/Documentation/devicetree/bindings/media/atmel-isi.txt
>> new file mode 100644
>> index 0000000..11c98ee
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/atmel-isi.txt
>> @@ -0,0 +1,50 @@
>> +Atmel Image Sensor Interface (ISI) SoC Camera Subsystem
>> +----------------------------------------------
>> +
>> +Required properties:
>> +- compatible: must be "atmel,at91sam9g45-isi"
>> +- reg: physical base address and length of the registers set for the device;
>> +- interrupts: should contain IRQ line for the ISI;
>> +- clocks: list of clock specifiers, corresponding to entries in
>> + the clock-names property;
>> +- clock-names: must contain "isi_clk", which is the isi peripherial clock.
>> +
>> +ISI supports a single port node with parallel bus. It should contain one
>> +'port' child node with child 'endpoint' node. Please refer to the bindings
>> +defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
>> +
>> +Example:
>> + isi: isi at f0034000 {
>> + compatible = "atmel,at91sam9g45-isi";
>> + reg = <0xf0034000 0x4000>;
>> + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
>> +
>> + clocks = <&isi_clk>;
>> + clock-names = "isi_clk";
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_isi>;
>> +
>> + port {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + isi_0: endpoint {
>> + remote-endpoint = <&ov2640_0>;
>> + };
>> + };
>> + };
>> +
>> + i2c1: i2c at f0018000 {
>> + ov2640: camera at 0x30 {
>> + compatible = "omnivision,ov2640";
>> + reg = <0x30>;
>> +
>> + port {
>> + ov2640_0: endpoint {
>> + remote-endpoint = <&isi_0>;
>> + bus-width = <8>;
>> + };
>> + };
>> + };
>> + };
>> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
>> index f4add0a..d6a1f7b 100644
>> --- a/drivers/media/platform/soc_camera/atmel-isi.c
>> +++ b/drivers/media/platform/soc_camera/atmel-isi.c
>> @@ -19,6 +19,7 @@
>> #include <linux/interrupt.h>
>> #include <linux/kernel.h>
>> #include <linux/module.h>
>> +#include <linux/of.h>
>> #include <linux/platform_device.h>
>> #include <linux/slab.h>
>>
>> @@ -33,6 +34,7 @@
>> #define VID_LIMIT_BYTES (16 * 1024 * 1024)
>> #define MIN_FRAME_RATE 15
>> #define FRAME_INTERVAL_MILLI_SEC (1000 / MIN_FRAME_RATE)
>> +#define ISI_DEFAULT_MCLK_FREQ 25000000
>>
>> /* Frame buffer descriptor */
>> struct fbd {
>> @@ -885,6 +887,20 @@ static int atmel_isi_remove(struct platform_device *pdev)
>> return 0;
>> }
>>
>> +static int atmel_isi_probe_dt(struct atmel_isi *isi,
>> + struct platform_device *pdev)
>> +{
>> + struct device_node *node = pdev->dev.of_node;
>> +
>> + /* Default settings for ISI */
>> + isi->pdata.full_mode = 1;
>> + isi->pdata.mck_hz = ISI_DEFAULT_MCLK_FREQ;
>> + isi->pdata.frate = ISI_CFG1_FRATE_CAPTURE_ALL;
>> + isi->pdata.data_width_flags = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10;
>> +
>> + return 0;
>> +}
>> +
>> static int atmel_isi_probe(struct platform_device *pdev)
>> {
>> unsigned int irq;
>> @@ -896,7 +912,7 @@ static int atmel_isi_probe(struct platform_device *pdev)
>> struct isi_platform_data *pdata;
>>
>> pdata = dev->platform_data;
>> - if (!pdata || !pdata->data_width_flags) {
>> + if ((!pdata || !pdata->data_width_flags) && !pdev->dev.of_node) {
>> dev_err(&pdev->dev,
>> "No config available for Atmel ISI\n");
>> return -EINVAL;
>> @@ -912,7 +928,11 @@ static int atmel_isi_probe(struct platform_device *pdev)
>> if (IS_ERR(isi->pclk))
>> return PTR_ERR(isi->pclk);
>>
>> - memcpy(&isi->pdata, pdata, sizeof(struct isi_platform_data));
>> + if (pdata)
>> + memcpy(&isi->pdata, pdata, sizeof(struct isi_platform_data));
>> + else /* dt probe */
>> + atmel_isi_probe_dt(isi, pdev);
>> +
>> isi->active = NULL;
>> spin_lock_init(&isi->lock);
>> INIT_LIST_HEAD(&isi->video_buffer_list);
>> @@ -1014,11 +1034,18 @@ err_alloc_ctx:
>> return ret;
>> }
>>
>> +static const struct of_device_id atmel_isi_of_match[] = {
>> + { .compatible = "atmel,at91sam9g45-isi" },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, atmel_isi_of_match);
>> +
>> static struct platform_driver atmel_isi_driver = {
>> .remove = atmel_isi_remove,
>> .driver = {
>> .name = "atmel_isi",
>> .owner = THIS_MODULE,
>> + .of_match_table = atmel_isi_of_match,
>> },
>> };
>>
>> --
>> 1.7.9.5
>>
> ---
> Guennadi Liakhovetski, Ph.D.
> Freelance Open-Source Software Developer
> http://www.open-technology.de/
More information about the linux-arm-kernel
mailing list