[RFC PATCH 7/7] ARM: spear: use central SMP spin-table routines
Alex Elder
elder at linaro.org
Fri Mar 28 17:13:00 EDT 2014
Get rid of the spear-specific code that implements the "holding pen"
for secondary CPUs. Use the code defined in "arch/arm/kernel/smp.c"
instead.
Note:
The original "holding pen" code for this machine used only the
bottom 4 bits of the MPIDR to identify the processor id. The
common code looks at the bottom 24 bits. The validity of this
change needs to be verified.
Signed-off-by: Alex Elder <elder at linaro.org>
---
arch/arm/mach-spear/Makefile | 2 +-
arch/arm/mach-spear/generic.h | 1 -
arch/arm/mach-spear/headsmp.S | 47 --------------------------
arch/arm/mach-spear/platsmp.c | 75 ++---------------------------------------
4 files changed, 4 insertions(+), 121 deletions(-)
delete mode 100644 arch/arm/mach-spear/headsmp.S
diff --git a/arch/arm/mach-spear/Makefile b/arch/arm/mach-spear/Makefile
index a946c19..974a417 100644
--- a/arch/arm/mach-spear/Makefile
+++ b/arch/arm/mach-spear/Makefile
@@ -7,7 +7,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
# Common support
obj-y := restart.o time.o
-smp-$(CONFIG_SMP) += headsmp.o platsmp.o
+smp-$(CONFIG_SMP) += platsmp.o
smp-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_ARCH_SPEAR13XX) += spear13xx.o $(smp-y)
diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
index a99d90a..86189ec 100644
--- a/arch/arm/mach-spear/generic.h
+++ b/arch/arm/mach-spear/generic.h
@@ -36,7 +36,6 @@ void __init spear13xx_l2x0_init(void);
void spear_restart(enum reboot_mode, const char *);
-void spear13xx_secondary_startup(void);
void spear13xx_cpu_die(unsigned int cpu);
extern struct smp_operations spear13xx_smp_ops;
diff --git a/arch/arm/mach-spear/headsmp.S b/arch/arm/mach-spear/headsmp.S
deleted file mode 100644
index ed85473..0000000
--- a/arch/arm/mach-spear/headsmp.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * arch/arm/mach-spear13XX/headsmp.S
- *
- * Picked from realview
- * Copyright (c) 2012 ST Microelectronics Limited
- * Shiraz Hashim <shiraz.hashim at st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-
- __INIT
-
-/*
- * spear13xx specific entry point for secondary CPUs. This provides
- * a "holding pen" into which all secondary cores are held until we're
- * ready for them to initialise.
- */
-ENTRY(spear13xx_secondary_startup)
- mrc p15, 0, r0, c0, c0, 5
- and r0, r0, #15
- adr r4, 1f
- ldmia r4, {r5, r6}
- sub r4, r4, r5
- add r6, r6, r4
-pen: ldr r7, [r6]
- cmp r7, r0
- bne pen
-
- /* re-enable coherency */
- mrc p15, 0, r0, c1, c0, 1
- orr r0, r0, #(1 << 6) | (1 << 0)
- mcr p15, 0, r0, c1, c0, 1
- /*
- * we've been released from the holding pen: secondary_stack
- * should now contain the SVC stack for this core
- */
- b secondary_startup
-
- .align
-1: .long .
- .long pen_release
-ENDPROC(spear13xx_secondary_startup)
diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c
index e16f779..e97af7d 100644
--- a/arch/arm/mach-spear/platsmp.c
+++ b/arch/arm/mach-spear/platsmp.c
@@ -20,77 +20,8 @@
#include <mach/spear.h>
#include "generic.h"
-/*
- * Write pen_release in a way that is guaranteed to be visible to all
- * observers, irrespective of whether they're taking part in coherency
- * or not. This is necessary for the hotplug code to work reliably.
- */
-static void write_pen_release(int val)
-{
- pen_release = val;
- smp_wmb();
- sync_cache_w(&pen_release);
-}
-
-static DEFINE_SPINLOCK(boot_lock);
-
static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
-static void spear13xx_secondary_init(unsigned int cpu)
-{
- /*
- * let the primary processor know we're out of the
- * pen, then head off into the C entry point
- */
- write_pen_release(-1);
-
- /*
- * Synchronise with the boot thread.
- */
- spin_lock(&boot_lock);
- spin_unlock(&boot_lock);
-}
-
-static int spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- unsigned long timeout;
-
- /*
- * set synchronisation state between this boot processor
- * and the secondary one
- */
- spin_lock(&boot_lock);
-
- /*
- * The secondary processor is waiting to be released from
- * the holding pen - release it, then wait for it to flag
- * that it has been released by resetting pen_release.
- *
- * Note that "pen_release" is the hardware CPU ID, whereas
- * "cpu" is Linux's internal ID.
- */
- write_pen_release(cpu);
-
- arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-
- timeout = jiffies + (1 * HZ);
- while (time_before(jiffies, timeout)) {
- smp_rmb();
- if (pen_release == -1)
- break;
-
- udelay(10);
- }
-
- /*
- * now the secondary core is starting up let it run its
- * calibrations, then wait for it to finish
- */
- spin_unlock(&boot_lock);
-
- return pen_release != -1 ? -ENOSYS : 0;
-}
-
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
@@ -119,14 +50,14 @@ static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus)
* (presently it is in SRAM). The BootMonitor waits until it receives a
* soft interrupt, and then the secondary CPU branches to this address.
*/
- __raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
+ __raw_writel(virt_to_phys(secondary_holding_pen), SYS_LOCATION);
}
struct smp_operations spear13xx_smp_ops __initdata = {
.smp_init_cpus = spear13xx_smp_init_cpus,
.smp_prepare_cpus = spear13xx_smp_prepare_cpus,
- .smp_secondary_init = spear13xx_secondary_init,
- .smp_boot_secondary = spear13xx_boot_secondary,
+ .smp_secondary_init = smp_secondary_init,
+ .smp_boot_secondary = smp_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = spear13xx_cpu_die,
#endif
--
1.7.9.5
More information about the linux-arm-kernel
mailing list