[PATCH 43/75] ARM: l2c: omap2: remove explicit SMI calls to enable L2 cache

[Russell King]

Now that OMAP2 uses the write_sec method, we don't need to enable the L2
cache in OMAP2 specific code; this can be done via the normal mechanisms
in the L2C code.  Remove the OMAP2 specific code.

Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
 arch/arm/mach-omap2/omap4-common.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 7abc1eb15bf9..343c354ae6f5 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -222,11 +222,6 @@ static int __init omap_l2_cache_init(void)
 			(1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) |
 			(1 << L2X0_AUX_CTRL_EARLY_BRESP_SHIFT);
 
-	omap_smc1(0x109, aux_ctrl);
-
-	/* Enable PL310 L2 Cache controller */
-	omap_smc1(0x102, 0x1);
-
 	outer_cache.write_sec = omap4_l2c310_write_sec;
 	if (of_have_populated_dt())
 		l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
-- 
1.8.3.1