[PATCH v6 06/10] ARM: shmobile: r8a7790: Add PCIe device nodes
Phil Edworthy
phil.edworthy at renesas.com
Thu Mar 27 05:26:52 EDT 2014
Signed-off-by: Phil Edworthy <phil.edworthy at renesas.com>
v6:
- Split device and board DT changes
---
arch/arm/boot/dts/r8a7790.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index df9ec61..dbcea57 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -821,4 +821,28 @@
#size-cells = <0>;
status = "disabled";
};
+
+ pcie: pcie at fe000000 {
+ compatible = "renesas,pcie-r8a7790";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
+ 0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
+ interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH
+ 0 117 IRQ_TYPE_LEVEL_HIGH
+ 0 118 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_PCIE>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ status = "disabled";
+ };
};
--
1.9.0
More information about the linux-arm-kernel
mailing list