mvebu: Kirkwood: Device Tree file for Zyxel NSA320
Adam Baker
linux at baker-net.org.uk
Wed Mar 26 19:07:09 EDT 2014
On 26/03/14 01:06, Jason Cooper wrote:
> Adam,
>
> Any progress on this?
>
> thx,
>
> Jason.
I think it's about ready, I'm just trying to find time to tidy it up to
post properly. My current thinking is that it should be split into 3 patches
1 - Move some things that are common to both nsa310, nsa310a and nsa320 into
kirkwood-nsa310-common.dtsi
2 - add the dts for nsa320
3 - rename kirkwood-nsa310-common.dtsi to kirkwood-nsa3x0-common.dtsi (I suspect
the nsa325 is sufficiently different to not share this file). I suggest
making this change last as it can easily be dropped till later if it causes
conflicts.
Current diff for changes 1 & 2 is below in case anyone wants to make any further
comments.
Other than splitting into separate patches I'm now happy with this so
Signed-off-by: Adam Baker <linux at baker-net.org.uk>
----
diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
index aa78c2d..843b8b5 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
@@ -7,15 +7,40 @@
ocp at f1000000 {
pinctrl: pinctrl at 10000 {
- pmx_usb_power_off: pmx-usb-power-off {
+ pmx_usb_power: pmx-usb-power {
marvell,pins = "mpp21";
marvell,function = "gpio";
};
+
pmx_pwr_off: pmx-pwr-off {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
+ pmx_btn_reset: pmx-btn-reset {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_copy: pmx-btn-copy {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_power: pmx-btn-power {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_copy_green: pmx-led-copy-green {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_copy_red: pmx-led-copy-red {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
};
serial at 12000 {
@@ -43,17 +68,42 @@
gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
+ pinctrl-names = "default";
+
+ button at 1 {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+ button at 2 {
+ label = "Copy Button";
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ button at 3 {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-0 = <&pmx_usb_power_off>;
+ pinctrl-0 = <&pmx_usb_power>;
pinctrl-names = "default";
- usb0_power_off: regulator at 1 {
+ usb0_power: regulator at 1 {
compatible = "regulator-fixed";
reg = <1>;
- regulator-name = "USB Power Off";
+ regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 03fa24c..372f701 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -59,26 +59,6 @@
marvell,function = "gpio";
};
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp36";
- marvell,function = "gpio";
- };
-
- pmx_btn_copy: pmx-btn-copy {
- marvell,pins = "mpp37";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_green: pmx-led-copy-green {
- marvell,pins = "mpp39";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_red: pmx-led-copy-red {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
-
pmx_led_hdd_green: pmx-led-hdd-green {
marvell,pins = "mpp41";
marvell,function = "gpio";
@@ -94,10 +74,6 @@
marvell,function = "gpio";
};
- pmx_btn_power: pmx-btn-power {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
};
i2c at 11000 {
@@ -110,30 +86,6 @@
};
};
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
- pinctrl-names = "default";
-
- button at 1 {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- };
- button at 2 {
- label = "Copy Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- button at 3 {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts
index a5e7794..ead7a36 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310a.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts
@@ -38,11 +38,6 @@
marvell,function = "gpio";
};
- pmx_usb_power_off: pmx-usb-power-off {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
pmx_led_sys_green: pmx-led-sys-green {
marvell,pins = "mpp28";
marvell,function = "gpio";
@@ -53,26 +48,6 @@
marvell,function = "gpio";
};
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp36";
- marvell,function = "gpio";
- };
-
- pmx_btn_copy: pmx-btn-copy {
- marvell,pins = "mpp37";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_green: pmx-led-copy-green {
- marvell,pins = "mpp39";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_red: pmx-led-copy-red {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
-
pmx_led_hdd_green: pmx-led-hdd-green {
marvell,pins = "mpp41";
marvell,function = "gpio";
@@ -83,11 +58,6 @@
marvell,function = "gpio";
};
- pmx_btn_power: pmx-btn-power {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
-
};
i2c at 11000 {
@@ -100,28 +70,6 @@
};
};
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- button at 1 {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- };
- button at 2 {
- label = "Copy Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- button at 3 {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts
new file mode 100644
index 0000000..6c8f692
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa320.dts
@@ -0,0 +1,214 @@
+/* Device tree file for the Zyxel NSA 320 NAS box.
+ *
+ * Copyright (c) 2014, Adam Baker <linux at baker-net.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based upon the board setup file created by Peter Schildmann */
+
+/dts-v1/;
+
+#include "kirkwood-nsa310-common.dtsi"
+
+/ {
+ model = "Zyxel NSA320";
+ compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie at 1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+ pinctrl-names = "default";
+
+ /* SATA Activity and Present pins are not connected */
+ pmx_sata0: pmx-sata0 {
+ marvell,pins ;
+ marvell,function = "sata0";
+ };
+
+ pmx_sata1: pmx-sata1 {
+ marvell,pins ;
+ marvell,function = "sata1";
+ };
+
+ pmx_led_hdd2_green: pmx-led-hdd2-green {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd2_red: pmx-led-hdd2-red {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ pmx_mcu_data: pmx-mcu-data {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_usb_green: pmx-led-usb-green {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ pmx_mcu_clk: pmx-mcu-clk {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_mcu_act: pmx-mcu-act {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_green: pmx-led-sys-green {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_orange: pmx-led-sys-orange {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd1_green: pmx-led-hdd1-green {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd1_red: pmx-led-hdd1-red {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ pmx_htp: pmx-htp {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+
+ /* Buzzer needs to be switched at around 1kHz so is
+ not compatible with the gpio-beeper driver. */
+ pmx_buzzer: pmx-buzzer {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ pmx_vid_b1: pmx-vid-b1 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_resume_data: pmx-power-resume-data {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_resume_clk: pmx-power-resume-clk {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+ };
+
+ i2c at 11000 {
+ status = "okay";
+
+ pcf8563: pcf8563 at 51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+ };
+
+ regulators {
+ usb0_power: regulator at 1 {
+ enable-active-high;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+ &pmx_led_usb_green
+ &pmx_led_sys_green &pmx_led_sys_orange
+ &pmx_led_copy_green &pmx_led_copy_red
+ &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+ pinctrl-names = "default";
+
+ green-sys {
+ label = "nsa320:green:sys";
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ };
+ orange-sys {
+ label = "nsa320:orange:sys";
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+ green-hdd1 {
+ label = "nsa320:green:hdd1";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ };
+ red-hdd1 {
+ label = "nsa320:red:hdd1";
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+ green-hdd2 {
+ label = "nsa320:green:hdd2";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ red-hdd2 {
+ label = "nsa320:red:hdd2";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ green-usb {
+ label = "nsa320:green:usb";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ };
+ green-copy {
+ label = "nsa320:green:copy";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ };
+ red-copy {
+ label = "nsa320:red:copy";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ /* The following pins are currently not assigned to a driver,
+ some of them should be configured as inputs.
+ pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
+ &pmx_htp &pmx_vid_b1
+ &pmx_power_resume_data &pmx_power_resume_clk>; */
+};
+
+&mdio {
+ status = "okay";
+ ethphy0: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port at 0 {
+ phy-handle = <ðphy0>;
+ };
+};
More information about the linux-arm-kernel
mailing list