[PATCH 3/3] arm: mxs: dt: imx28-duckbill: use symbolic names from gpio.h

[Michael Heimpold]

Use GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW instead of 0 and 1.

Signed-off-by: Michael Heimpold <mhei at heimpold.de>
---
 arch/arm/boot/dts/imx28-duckbill.dts |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
index 91c1a9a..ce1a7ef 100644
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -110,12 +110,12 @@
 
 		status {
 			label = "duckbill:green:status";
-			gpios = <&gpio3 5 0>;
+			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
 		};
 
 		failure {
 			label = "duckbill:red:status";
-			gpios = <&gpio3 4 0>;
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };
-- 
1.7.10.4