[RFC PATCH 11/12] ARM: dts: dra7: Add dt data for PCIe controller

[Kishon Vijay Abraham I]

Added dt data for PCIe controller. This node contains dt data for
both the DRA7 part of designware controller and for the designware core.
The documention for this node can be found @ ../bindings/pci/ti-pci.txt.

Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
---
 arch/arm/boot/dts/dra7.dtsi |   24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 7ac372b..10def39 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -701,6 +701,30 @@
 			};
 		};
 
+		pcie at 51000000 {
+			compatible = "ti,dra7xx-pcie";
+			reg = <0x51002000 0x14c>, <0x51000000 0x2000>, <0x4A002540 0x1f>;
+			reg-names = "ti_conf", "rc_dbics", "mmr_unlock";
+			interrupts = <0 232 0x4>, <0 233 0x4>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ti,device_type = <3>;
+			ranges = <0x00000800 0 0x20001000 0x20001000 0 0x00002000
+				  0x81000000 0 0          0x20003000 0 0x00010000
+				  0x82000000 0 0x20013000 0x20013000 0 0xffed000>;
+			#interrupt-cells = <1>;
+			base-mask = <0x00000000 0x0fffffff>;
+			num-lanes = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0x0 0 &gic 233>;
+			ti,hwmods = "pcie1";
+			phys = <&pcie1_phy>;
+			phy-names = "pcie-phy";
+			resets = <&prm_resets &device_reset>;
+			reset-names = "reset";
+		};
+
 		sata: sata at 4a141100 {
 			compatible = "snps,dwc-ahci";
 			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
-- 
1.7.9.5