[PATCH 1/2] net: mvneta: rename MVNETA_GMAC2_PSC_ENABLE to MVNETA_GMAC2_PCS_ENABLE

[Thomas Petazzoni]

Bit 3 of the MVNETA_GMAC_CTRL_2 is actually used to enable the PCS,
not the PSC: there was a typo in the name of the define, which this
commit fixes.

Cc: stable at vger.kernel.org
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
This patch is needed for a followup commit that fixes using the mvneta
driver as a module in RGMII configurations.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 drivers/net/ethernet/marvell/mvneta.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index f418f4f..d6b04d0 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -161,7 +161,7 @@
 #define      MVNETA_GMAC_MAX_RX_SIZE_MASK        0x7ffc
 #define      MVNETA_GMAC0_PORT_ENABLE            BIT(0)
 #define MVNETA_GMAC_CTRL_2                       0x2c08
-#define      MVNETA_GMAC2_PSC_ENABLE             BIT(3)
+#define      MVNETA_GMAC2_PCS_ENABLE             BIT(3)
 #define      MVNETA_GMAC2_PORT_RGMII             BIT(4)
 #define      MVNETA_GMAC2_PORT_RESET             BIT(6)
 #define MVNETA_GMAC_STATUS                       0x2c10
@@ -733,7 +733,7 @@ static void mvneta_port_sgmii_config(struct mvneta_port *pp)
 	u32 val;
 
 	val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
-	val |= MVNETA_GMAC2_PSC_ENABLE;
+	val |= MVNETA_GMAC2_PCS_ENABLE;
 	mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
 
 	mvreg_write(pp, MVNETA_SGMII_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
-- 
1.8.3.2