[PATCH 12/19] arm: dts: add omap5 GPU thermal data

[Alex Shi]

From: Eduardo Valentin <eduardo.valentin at ti.com>

This patch changes a dtsi file to contain the thermal data
for GPU domain on OMAP5 and later SoCs. This data will
enable a thermal shutdown at 125C.

This thermal data can be reused across TI SoC devices.

Cc: "Benoît Cousson" <bcousson at baylibre.com>
Cc: Tony Lindgren <tony at atomide.com>
Cc: Rob Herring <rob.herring at calxeda.com>
Cc: Pawel Moll <pawel.moll at arm.com>
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: Stephen Warren <swarren at wwwdotorg.org>
Cc: Ian Campbell <ian.campbell at citrix.com>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: linux-omap at vger.kernel.org
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin at ti.com>
(cherry picked from commit 28c90169f1d5eabf503e356c76bf49a67aef4cc0)

Signed-off-by: Alex Shi <alex.shi at linaro.org>
---
 arch/arm/boot/dts/omap5-gpu-thermal.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap5-gpu-thermal.dtsi

diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
new file mode 100644
index 0000000..1b87aca
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Device Tree Source for OMAP543x SoC GPU thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin at ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+gpu_thermal: gpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     1>;
+
+	trips {
+		gpu_crit: gpu_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
-- 
1.8.1.2