[PATCH] ARM: dts: imx6: add support for Ka-Ro TX6 modules
Lothar Waßmann
LW at KARO-electronics.de
Mon Mar 24 08:01:29 EDT 2014
Hi Shawn,
it would help readability a lot if you would trim down the quoted parts
of the original mail (like I did with [...] in this reply).
Shawn Guo wrote:
> On Wed, Mar 19, 2014 at 02:29:44PM +0100, Lothar Waßmann wrote:
> > This patch adds support for the Ka-Ro electronics GmbH TX6 modules.
> > There are five distinct module types with either i.MX6Q or i.MX6DL and
> > LVDS or LCD display interface and one DTS file for a complete system
> > with an i.MX6DL based TX6 module and a baseboard mounted on the back
> > of a display (imx6dl-tx6dl-comtft.dts).
> >
> > Signed-off-by: Lothar Waßmann <LW at KARO-electronics.de>
> > ---
> > arch/arm/boot/dts/Makefile | 6 +
> > arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts | 114 +++++
> > arch/arm/boot/dts/imx6dl-tx6u-801x.dts | 188 ++++++++
> > arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 166 +++++++
> > arch/arm/boot/dts/imx6q-tx6q-1010.dts | 192 +++++++++
> > arch/arm/boot/dts/imx6q-tx6q-1020.dts | 192 +++++++++
> > arch/arm/boot/dts/imx6q-tx6q-1110.dts | 174 ++++++++
> > arch/arm/boot/dts/imx6qdl-tx6.dtsi | 672 +++++++++++++++++++++++++++++
> > 8 files changed, 1704 insertions(+)
> > create mode 100644 arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
> > create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-801x.dts
> > create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-811x.dts
> > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1010.dts
> > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1020.dts
> > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1110.dts
> > create mode 100644 arch/arm/boot/dts/imx6qdl-tx6.dtsi
> >
[...]
> > diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
> > new file mode 100644
> > index 0000000..6df5a25
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
> > @@ -0,0 +1,114 @@
> > +/*
> > + * Copyright 2014 Lothar Waßmann <LW at KARO-electronics.de>
> > + *
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
> > + * Version 2 at the following locations:
> > + *
> > + * http://www.opensource.org/licenses/gpl-license.html
> > + * http://www.gnu.org/copyleft/gpl.html
> > + */
> > +
> > +/dts-v1/;
> > +#include "imx6dl.dtsi"
> > +#include "imx6qdl-tx6.dtsi"
> > +
> > +/ {
> > + model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
> > + compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl";
>
> Shouldn't it be "karo,imx6dl-tx6dl" instead?
>
Of course. :(
> > +
> > + aliases {
> > + display = &display;
> > + };
> > +
> > + backlight: backlight {
> > + compatible = "pwm-backlight";
> > + pwms = <&pwm2 0 500000 0>;
> > + power-supply = <®_3v3>;
> > + /*
> > + * a poor man's way to create a 1:1 relationship between
> > + * the PWM value and the actual duty cycle
> > + */
> > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> > + 10 11 12 13 14 15 16 17 18 19
> > + 20 21 22 23 24 25 26 27 28 29
> > + 30 31 32 33 34 35 36 37 38 39
> > + 40 41 42 43 44 45 46 47 48 49
> > + 50 51 52 53 54 55 56 57 58 59
> > + 60 61 62 63 64 65 66 67 68 69
> > + 70 71 72 73 74 75 76 77 78 79
> > + 80 81 82 83 84 85 86 87 88 89
> > + 90 91 92 93 94 95 96 97 98 99
> > + 100>;
> > + default-brightness-level = <50>;
> > + };
> > +
> > + display: display at di0 {
> > + compatible = "fsl,imx-parallel-display";
> > + interface-pix-fmt = "rgb24";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_disp0_1>;
> > + status = "okay";
> > +
> > + port {
> > + display0_in: endpoint {
> > + remote-endpoint = <&ipu1_di0_disp0>;
> > + };
> > + };
>
> I do not have OF graph stuff in my tree yet.
>
You can apply the patch, once it arrives in your tree.
[...]
> > diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
> > new file mode 100644
> > index 0000000..c97fb42
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
> > @@ -0,0 +1,166 @@
> > +/*
> > + * Copyright 2014 Lothar Waßmann <LW at KARO-electronics.de>
> > + *
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
> > + * Version 2 at the following locations:
> > + *
> > + * http://www.opensource.org/licenses/gpl-license.html
> > + * http://www.gnu.org/copyleft/gpl.html
> > + */
> > +
> > +/dts-v1/;
> > +#include "imx6dl.dtsi"
> > +#include "imx6qdl-tx6.dtsi"
> > +
> > +/ {
> > + model = "Ka-Ro electronics TX6U-811x Module";
> > + compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl";
> > +
> > + aliases {
> > + display = &lvds0;
> > + lvds0 = &lvds0;
> > + lvds1 = &lvds1;
> > + };
> > +
> > + backlight0: backlight0 {
> > + compatible = "pwm-backlight";
> > + pwms = <&pwm2 0 500000 0>;
> > + power-supply = <®_lcd0_pwr>;
> > + /*
> > + * a poor man's way to create a 1:1 relationship between
> > + * the PWM value and the actual duty cycle
> > + */
> > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> > + 10 11 12 13 14 15 16 17 18 19
> > + 20 21 22 23 24 25 26 27 28 29
> > + 30 31 32 33 34 35 36 37 38 39
> > + 40 41 42 43 44 45 46 47 48 49
> > + 50 51 52 53 54 55 56 57 58 59
> > + 60 61 62 63 64 65 66 67 68 69
> > + 70 71 72 73 74 75 76 77 78 79
> > + 80 81 82 83 84 85 86 87 88 89
> > + 90 91 92 93 94 95 96 97 98 99
> > + 100>;
> > + default-brightness-level = <50>;
> > + };
> > +
> > + backlight1: backlight1 {
> > + compatible = "pwm-backlight";
> > + pwms = <&pwm1 0 500000 0>;
> > + power-supply = <®_lcd1_pwr>;
> > + /*
> > + * a poor man's way to create a 1:1 relationship between
> > + * the PWM value and the actual duty cycle
> > + */
> > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
> > + 10 11 12 13 14 15 16 17 18 19
> > + 20 21 22 23 24 25 26 27 28 29
> > + 30 31 32 33 34 35 36 37 38 39
> > + 40 41 42 43 44 45 46 47 48 49
> > + 50 51 52 53 54 55 56 57 58 59
> > + 60 61 62 63 64 65 66 67 68 69
> > + 70 71 72 73 74 75 76 77 78 79
> > + 80 81 82 83 84 85 86 87 88 89
> > + 90 91 92 93 94 95 96 97 98 99
> > + 100>;
> > + default-brightness-level = <50>;
> > + };
> > +
> > + panel0 {
>
> The convention of device tree node is node-name at unit-address, so in this
> case it should probably be panel at 0.
>
AFAIK that's only true for nodes that require a 'reg' property.
Thus if it were:
panels {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
panel at 0 {
compatible = "simple-panel";
reg = <0>;
power-supply = <®_3v3>;
backlight = <&backlight0>;
};
[...]
> > diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
> > new file mode 100644
> > index 0000000..828e7f3
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
> > @@ -0,0 +1,672 @@
> > +/*
> > + * Copyright 2014 Lothar Waßmann <LW at KARO-electronics.de>
> > + *
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
> > + * Version 2 at the following locations:
> > + *
> > + * http://www.opensource.org/licenses/gpl-license.html
> > + * http://www.gnu.org/copyleft/gpl.html
> > + */
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/pwm/pwm.h>
> > +
> > +/ {
> > + aliases {
> > + can0 = &can2;
> > + can1 = &can1;
> > + ethernet0 = &fec;
> > + lcdif_23bit_pins_a = &pinctrl_disp0_1;
> > + lcdif_24bit_pins_a = &pinctrl_disp0_2;
> > + pwm0 = &pwm1;
> > + pwm1 = &pwm2;
> > + reg_can_xcvr = ®_can_xcvr;
> > + stk5led = &user_led;
> > + usbotg = &usbotg;
> > + sdhc0 = &usdhc1;
> > + sdhc1 = &usdhc2;
> > + };
> > +
> > + memory {
> > + reg = <0 0>; /* will be filled by U-Boot */
> > + };
> > +
> > + clocks {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + mclk: codec_clock {
>
> clock at 0
>
OK.
> > +&can1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_flexcan1>;
> > + xceiver-supply = <®_can_xcvr>;
> > +
>
> Drop the new line.
>
OK.
[...]
> > +&i2c3 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c3>;
> > + clock-frequency = <400000>;
> > + status = "okay";
> > +
> > + sgtl5000: sgtl5000 at 0a {
> > + compatible = "fsl,sgtl5000";
> > + reg = <0x0a>;
> > + VDDA-supply = <®_2v5>;
> > + VDDIO-supply = <®_3v3>;
> > + clocks = <&mclk>;
> > + };
> > +
> > + polytouch: edt-ft5x06 at 38 {
> > + compatible = "edt,edt-ft5x06";
> > + reg = <0x38>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_edt_ft5x06>;
> > + interrupt-parent = <&gpio6>;
> > + interrupts = <15 0>;
> > + reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
> > + wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
>
> Where are all these bindings documented?
>
That's one in a separate patch adding DT support to the edt_ft5x06
driver.
> > + linux,wakeup;
> > + };
> > +
> > + touchscreen: tsc2007 at 48 {
> > + compatible = "ti,tsc2007";
> > + reg = <0x48>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_tsc2007>;
> > + interrupt-parent = <&gpio3>;
> > + interrupts = <26 0>;
> > + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
> > + ti,x-plate-ohms = <660>;
> > + linux,wakeup;
> > + };
> > +};
> > +
> > +&iomuxc {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_hog>;
> > +
> > + imx6qdl-tx6 {
> > + pinctrl_hog: hoggrp {
> > + fsl,pins = <
> > + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */
> > + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */
> > + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT
>
> Broken comment?
>
Yeah, right. Bad, that the compiler doesn't complain here. :(
[...]
> > + pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
> > + fsl,pins = <
> > + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */
> > + >;
> > + };
> > +
> > + pinctrl_gpmi_nand: gpmi-nand {
>
> gpminandgrp
>
OK.
> > + pinctrl_kpp: kppgrp {
> > + fsl,pins = <
> > + MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1
> > + MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1
> > + MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1
> > + MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1
> > +
>
> Drop it.
>
I guess you mean the empty line.
OK.
[...]
> > +&uart2 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
>
> These two entries can be merged into one.
>
I prefer to have the handshake pinctrls separate from the data lines so
that the uart can be used with or without RTS/CTS, without having to
mess around with the pinctrl defs.
Lothar Waßmann
--
___________________________________________________________
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________
More information about the linux-arm-kernel
mailing list