[linux-sunxi] Re: [PATCH v2 6/8] ARM: sunxi: dt: Add x-powers-axp209.dtsi file

[Carlo Caione]

On Tue, Mar 18, 2014 at 10:04:50AM +0100, Maxime Ripard wrote:
> On Sat, Mar 15, 2014 at 04:43:43PM +0100, Carlo Caione wrote:
> > This dtsi describes the axp209 PMIC, and is to be included from inside
> > the i2c controller node to which the axp209 is connected.
> > 
> > Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> > Signed-off-by: Carlo Caione <carlo at caione.org>
> > ---
> >  arch/arm/boot/dts/x-powers-axp209.dtsi | 60 ++++++++++++++++++++++++++++++++++
> >  1 file changed, 60 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/x-powers-axp209.dtsi
> > 
> > diff --git a/arch/arm/boot/dts/x-powers-axp209.dtsi b/arch/arm/boot/dts/x-powers-axp209.dtsi
> > new file mode 100644
> > index 0000000..d272e67
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/x-powers-axp209.dtsi
> > @@ -0,0 +1,60 @@
> > +/*
> > + * x-powers,axp209 common code to be include from inside the axp209 node
> > + *
> > + * Copyright 2014 - Carlo Caione <carlo at caione.org>
> > + *
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
> > + * Version 2 or later at the following locations:
> > + *
> > + * http://www.opensource.org/licenses/gpl-license.html
> > + * http://www.gnu.org/copyleft/gpl.html
> > + */
> > +
> 
> I didn't even know such a thing was possible :)
> Nice hack.

Kudos to Hans ;)

> 
> > +	compatible = "x-powers,axp209";
> > +	interrupt-controller;
> > +	#interrupt-cells = <1>;
> 
> However, I'd move this out of it, and in the board file, so that we
> actually get an idea by looking at the board DTS of what device we are
> actually registering at this given address, and what it's capable of.

Do you mean the whole dtsi or just those three lines?

-- 
Carlo Caione