[PATCH v2 08/15] ARM: at91: sam9rl: add at91_adc to support adc and touchscreen

[Jonathan Cameron]

On 17/03/14 13:57, Alexandre Belloni wrote:
> The ADC clock needs to be defined to enable the at91_adc driver. It is defined
> to the same speed that is used for atmel_tsadcc.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
Looks good to me, but out of my area of expertise so I won't ack it.
> ---
>   arch/arm/mach-at91/at91sam9rl.c         |  7 +++
>   arch/arm/mach-at91/at91sam9rl_devices.c | 85 +++++++++++++++++++++++++++++++++
>   2 files changed, 92 insertions(+)
>
> diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
> index 3651517abedf..753ba4893836 100644
> --- a/arch/arm/mach-at91/at91sam9rl.c
> +++ b/arch/arm/mach-at91/at91sam9rl.c
> @@ -151,6 +151,11 @@ static struct clk ac97_clk = {
>   	.pmc_mask	= 1 << AT91SAM9RL_ID_AC97C,
>   	.type		= CLK_TYPE_PERIPHERAL,
>   };
> +static struct clk adc_op_clk = {
> +	.name		= "adc_op_clk",
> +	.type		= CLK_TYPE_PERIPHERAL,
> +	.rate_hz	= 1000000,
> +};
>
>   static struct clk *periph_clocks[] __initdata = {
>   	&pioA_clk,
> @@ -176,6 +181,7 @@ static struct clk *periph_clocks[] __initdata = {
>   	&udphs_clk,
>   	&lcdc_clk,
>   	&ac97_clk,
> +	&adc_op_clk,
>   	// irq0
>   };
>
> @@ -196,6 +202,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
>   	CLKDEV_CON_ID("pioB", &pioB_clk),
>   	CLKDEV_CON_ID("pioC", &pioC_clk),
>   	CLKDEV_CON_ID("pioD", &pioD_clk),
> +	CLKDEV_CON_ID("adc_clk", &tsc_clk),
>   };
>
>   static struct clk_lookup usart_clocks_lookups[] = {
> diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
> index a698bdab2cce..b836dada942c 100644
> --- a/arch/arm/mach-at91/at91sam9rl_devices.c
> +++ b/arch/arm/mach-at91/at91sam9rl_devices.c
> @@ -22,6 +22,7 @@
>   #include <mach/at91_matrix.h>
>   #include <mach/at91sam9_smc.h>
>   #include <linux/platform_data/dma-atmel.h>
> +#include <linux/platform_data/at91_adc.h>
>
>   #include "board.h"
>   #include "generic.h"
> @@ -656,6 +657,90 @@ void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
>   void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
>   #endif
>
> +/* --------------------------------------------------------------------
> + *  ADC and Touchscreen
> + * -------------------------------------------------------------------- */
> +
> +#if IS_ENABLED(CONFIG_AT91_ADC)
> +static struct at91_adc_data adc_data;
> +
> +static struct resource adc_resources[] = {
> +	[0] = {
> +		.start	= AT91SAM9RL_BASE_TSC,
> +		.end	= AT91SAM9RL_BASE_TSC + SZ_16K - 1,
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	[1] = {
> +		.start	= NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC,
> +		.end	= NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC,
> +		.flags	= IORESOURCE_IRQ,
> +	}
> +};
> +
> +static struct platform_device at91_adc_device = {
> +	.name           = "at91sam9rl-adc",
> +	.id             = -1,
> +	.dev            = {
> +		.platform_data  = &adc_data,
> +	},
> +	.resource       = adc_resources,
> +	.num_resources  = ARRAY_SIZE(adc_resources),
> +};
> +
> +static struct at91_adc_trigger at91_adc_triggers[] = {
> +	[0] = {
> +		.name = "external-rising",
> +		.value = 1,
> +		.is_external = true,
> +	},
> +	[1] = {
> +		.name = "external-falling",
> +		.value = 2,
> +		.is_external = true,
> +	},
> +	[2] = {
> +		.name = "external-any",
> +		.value = 3,
> +		.is_external = true,
> +	},
> +	[3] = {
> +		.name = "continuous",
> +		.value = 6,
> +		.is_external = false,
> +	},
> +};
> +
> +void __init at91_add_device_adc(struct at91_adc_data *data)
> +{
> +	if (!data)
> +		return;
> +
> +	if (test_bit(0, &data->channels_used))
> +		at91_set_A_periph(AT91_PIN_PA17, 0);
> +	if (test_bit(1, &data->channels_used))
> +		at91_set_A_periph(AT91_PIN_PA18, 0);
> +	if (test_bit(2, &data->channels_used))
> +		at91_set_A_periph(AT91_PIN_PA19, 0);
> +	if (test_bit(3, &data->channels_used))
> +		at91_set_A_periph(AT91_PIN_PA20, 0);
> +	if (test_bit(4, &data->channels_used))
> +		at91_set_A_periph(AT91_PIN_PD6, 0);
> +	if (test_bit(5, &data->channels_used))
> +		at91_set_A_periph(AT91_PIN_PD7, 0);
> +
> +	if (data->use_external_triggers)
> +		at91_set_A_periph(AT91_PIN_PB15, 0);
> +
> +	data->startup_time = 40;
> +	data->trigger_number = 4;
> +	data->trigger_list = at91_adc_triggers;
> +
> +	adc_data = *data;
> +	platform_device_register(&at91_adc_device);
> +}
> +#else
> +void __init at91_add_device_adc(struct at91_adc_data *data) {}
> +#endif
>
>   /* --------------------------------------------------------------------
>    *  RTC
>