[PATCH v2 2/5] clk: berlin: add berlin clocks DT bindings documentation

[Sebastian Hesselbarth]

On 03/21/2014 09:08 PM, Alexandre Belloni wrote:
> Document the device tree bindings for the PLLs found on the Marvell Berlin SoCs.
>
> Cc: devicetree at vger.kernel.org

You forgot to add Mark Rutland's Reviewed-by. He didn't mentioned it
explicitly but his "Otherwise this looks fine to me" on v1, is as good
as a Reviewed-by. But, no need to resend, I'll fix it up.

Also, everything above the '---' will be part of your commit log. While
the Signed-off-by and Reviewed-by should be in there, Cc's really don't
need to.

You can add another '---' to separate commit message and some stuff
you want to have early in you email with:

Blablabla commit message.

Signed-off-by: ...
Reviewed-by: ...
---
Changelog:
- blabla

Cc: cc-me-recipient
...
---
    .../devicetree/bindings/clock/berlin-clock.txt     | 29 
++++++++++++++++++++++
    1 file changed, 29 insertions(+)
    create mode 100644 
Documentation/devicetree/bindings/clock/berlin-clock.txt

  diff --git a/Documentation/devicetree/bindings/clock/berlin-clock.txt 
b/Documentation/devicetree/bindings/clock/berlin-clock.txt
...

> Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
> ---
>   .../devicetree/bindings/clock/berlin-clock.txt     | 29 ++++++++++++++++++++++
>   1 file changed, 29 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/clock/berlin-clock.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/berlin-clock.txt b/Documentation/devicetree/bindings/clock/berlin-clock.txt
> new file mode 100644
> index 000000000000..49b7860bffb8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/berlin-clock.txt
> @@ -0,0 +1,29 @@
> +Device Tree Clock bindings for Marvell Berlin clocks
> +
> +This binding uses the common clock binding[1].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible: shall be one of the following:
> +	"marvell,berlin2-pll",
> +	"marvell,berlin2q-pll":
> +		CPU PLL and System PLL
> +- reg: Address and length of the clock register set.
> +- #clock-cells: from common clock binding; shall be set to 0.
> +- clocks: from common clock binding
> +
> +smclk: sysmgr-clock {
> +	compatible = "fixed-clock";
> +	#clock-cells = <0>;
> +	clock-frequency = <25000000>;
> +};
> +
> +cpupll: cpupll at ea003c {
> +	compatible = "marvell,berlin2-pll";
> +	clocks = <&smclk>;
> +	#clock-cells = <0>;
> +	reg = <0xea003c 0x8>;
> +};
> +
> +
>