[PATCH 37/62] ARM: sa1100/pxa: fix MTD_XIP build

[Arnd Bergmann]

On Wednesday 19 March 2014, Russell King - ARM Linux wrote:
> On Wed, Mar 19, 2014 at 08:29:34PM +0100, Arnd Bergmann wrote:
> > In commit 3169663ac5902 "ARM: sa11x0/pxa: convert OS timer registers
> > to IOMEM", the definition of the OSCR macro was changed to be an
> > __iomem pointer, but the same register is also used by the XIP
> > code. This patch does the corresponding change here as well.
> > 
> > Since PXA now uses a local variable for the base address of the
> > ICIP register, the xip_irqpending function has to be moved
> > into irq.c in the process.
> > 
> > Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> > Cc: Russell King <linux at arm.linux.org.uk>
> > ---
> >  arch/arm/mach-pxa/include/mach/mtd-xip.h    | 7 ++++---
> >  arch/arm/mach-pxa/irq.c                     | 8 ++++++++
> >  arch/arm/mach-sa1100/include/mach/mtd-xip.h | 4 ++--
> >  3 files changed, 14 insertions(+), 5 deletions(-)
> > 
> > diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
> > index 990d2bf..c4c90d1 100644
> > --- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
> > +++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
> > @@ -17,11 +17,12 @@
> >  
> >  #include <mach/regs-ost.h>
> >  
> > -#define xip_irqpending()     (ICIP & ICMR)
> > +extern bool xip_irqpending(void);
> >  
> >  /* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
> > -#define xip_currtime()               (OSCR)
> > -#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4)
> > +#define xip_irqpending()     xip_irqpending()
> > +#define xip_currtime()               readl(OSCR)
> > +#define xip_elapsed_since(x) (signed)((readl(OSCR) - (x)) / 4)
> 
> I don't think you can do that.  I believe xip_irqpending() has to be
> inline so that the XIP code (located in RAM) can detect when an
> interrupt is pending, suspend the MTD operation, switch the MTD back
> to read mode, and then allow the kernel to run.
> 
> I'd be nervous about this without Nicolas checking it, or it being
> built and the resulting assembly inspected.

Ok, I'll drop this patch from the series for now, and mark it as
something to be investigated. and apply the change that Nico suggested.

	Arnd